reaper1_3

cheers thats what i hoped!! Thanks

Yeh i think it is too? they are bike mirrors!

anyone??

am mid flow of swopping my standard manifold for a 50mm one, when i removed the injectors they had clips holding them in place on the 50mm manifold the clips will not fit? do i need different clips or are they not neccessary as they are a very tight fit!? cheers

im doing a gallardo day soon cant wait!! sound great from what you say!!!

the thing to watch is how high they sit on the subframes. the ones i looked at would mean the seats would sit very high almost on the roof lining....

The height is the main thing to watch as the rado seats sit very low... i would think any sport coupe seats would be possible :)

cheers

All three of the problems are quite common on the rado if you do a search you will find loads of threads regarding your problem... hope that helps!

i bought a set of them... worked fine although i believe a few have had problems with em and i believe it is cheaper todo yourself!!

I used to sell em for a living! along with all the other vw's available at the time. used to fight with the other salesmen when ever there was a demo available to take home!!! so i thought id just buy one instead!! problem solved!!

nice lookin car mate.... just needs slammin!

Am about to change my inlet manifold and was wondering what seals/gaskets i would need? can someone let me know.... cheers

looking good..

mmm the car in supernatural is very nice ultra cool 8)

yeh like em good to see something abit different imo! post up some better pics when you can!!

im lookin on ebay at the mo.. you seem to have the same prob as me will let you know if i find one/two!!

id be interested if a group buy was to happen...

looks nice.. think the cover would not sure about the mech though?

Nice leg!!!! :D

Go for it love the 4motion!!

hi all i am currently getting alot of people asking about fitting TT seats.... So if the mods are happy could you make this a sticky?? here goes.... I have included photos also to help get the idea.... basically the subframe spans the gap between the original rado runners and gives you a rear mounting point for the tt seats. as you will have seen the tt mounts are horizontal and the rado vertical... once you have the frames built up you will need to drill two holes to allow you to bolt the frames onto the tt runners when done you will be able to slide the tt seats into the original rado runners. when happy with the position you will need to drill two more holes into the cross member which runs across the rado foot well ( basically either side of the original seat hook up point.) ok hope you are following this...... remove tt seats you will see at the front of the tt runners the original front bolting points these will be at a 45% angle to the runners. I decided to flatten these by cutting the folded down sides off and hammering them flush with the runners hence allowing me to bolt them into the cross frame either side of the original bolting point in the front foot well. i refitted the seats and marked the cross member then drilled the holes. heres the only tricky bit the cross members has some small holes inthe top which you will have to hold the bolt through, i decided to remove seats and with some metal glu glue bolts to the underside of the frame positioned directly under the hole i just drilled. let the glue dry and refit seats you can the bolt the front part of the tt runners into position. and thats it LOL i hope you can understand the above basically it took me a day to fit both, but that was obviously working everything out!!! if you need any help pm me and i will send you the plans for the frames....

Here's my new one!!! Isotta Nivola DSX

yep looks like an rc to me as well or those doors are huge!!!

probably buyer dropped out! no money no goods!!!! think they would look good but im not sure how they would work still think you would need frame work done to get them to work and fold... as they will not have any of the release mech etc.... might be worth checking a 3 door version out to see if the seats are the same as it maybe a case of the mechs etc being there just covered???? the backs would probably fit no real probs....