VR6Pete
-
Content Count
2,164 -
Joined
Posts posted by VR6Pete
-
-
These clips, am I suppose to push them in or prise them away from the hand break? I've tried both and still not coming off :)
-
Cheers for the tips guys. Those pics are helpful. A job for another day now. Done a full valet, interior out etc... It's looking amazing now.
-
Nightmare. Decided defer that job until after I've wet vac the interior
-
I'm just about to install Daves handbrake tunnel kit, but struggling to even get the plastic off the handbrake. Help :-)
-
I just took that off to get a better photo :)
-
It's just that there's a washer I found that the tip of the latch looks to have fit into. Passenger side was sat on the washer and drivers side wasn't and latch goes all the way through.
As long as its safe then ok I guess :)
-
Is this right, or should it sit on washer that prevents it going all the way? Cheers Pete
-
Spot on mate. Cheers :)
-
Just a photo using your iPhone / android should be enough matey? :)
-
If you can wait until tomorrow I'll scan mine in and PDF it for you?Cheers mate that's sound.
-
Hi.
Has anyone got the installation instructions they can upload / take a photo of etc..
Typically, I've lost my instructions and I'm going to install tomorrow!
Cheers.
Pete
-
Why not just buy a full victor reinz head gasket kit? If your after stem seals and head gasket it would make logical sense to use all the other gaskets the set comes with?
-
Anyone got one of these from Machine Mart?
I'm gonna mop / polish and give the corrado a good going over tomorrow....
Thought its time I got a cover, it will be kept in the garage but gets dusty and brushed up against...
Do I need a medium or large for the corrado?
Large: http://www.machinemart.co.uk/shop/product/details/cl-car-cover-lrg-pev
Medium: http://www.machinemart.co.uk/shop/product/details/cl-car-cover-med-pev
Cheers.
Pete
-
Yep. Your right Dave. Any chance you can send me a PM with payment details assuming all is ok with the bits?
-
It's just the end one missing on one of mine, ill have check, I'm sure I've got 3 on my drivers side! Ill let you know :)
-
Cheers mate
-
Dealer only part that believe it or not :)
-
I bought the Sloane Square modified MK III VR6 Golf (3.2l), gas converted it then moved it on. I'm back in the market to replace my 16v with a storm, but the interior is trashed, where would I send it for a makeover in the Midlands anyone?M Thanks
I can recommend http://optauto.easyspaceshops.com/ in Stoke on Trent.
They started out with mini's retrims, dash, centre console conversions... I'm going be taking my steering wheel, handbrake lever and gator get retrimned.
If you contact them, say that Pete Leese send you their way... Ask for Andy Roberts.
-
Yes I have them, which clip do you need? Is it the one that holds the surround in just above the hole on your surround?£10 + post, shall we say £13 posted?
Yeah that's the one Dave, the plastic bit on the surround just clips into it, there's 3 in total but already have 2.
But I'll take them off your hands for £13 no problem :)
-
Cheers mate.
I've only noticed the other day that my passenger light is from an early corrado and my drivers is from a late, just going swap the glass and plastic surround like I have done with my drivers side already from a set of knackered lights I had.
-
There's a corrado storm just gone up for sale on VR6OC.
-
Hi everyone.
I'm after the plastic surround from a passenger side late headlight glass and one metal securing clip.
Some one has drilled 2 holes in mine and I'm also missing one clip.
Cheers.
Pete
-
Andy, it's easy enough removing inlet mani, cam cover and the end cover, the problem comes undoing the sprocket bolt. It wouldn't budge on mine, hence having to use the one off my breaker. If it had come off then I doubt I'd have this problem.Oh and you need to use joint sealant when refitting the end cover, not sure if the VW stuff is a must or some other brand will do?
Even if you were able to crack off the bolt, I'd be surprised if the pickup hasn't of broke upon removal anyway
-
Kev, yes the intermediate shaft timing marks were properly aligned. Do I need to swap the whole sprocket or does the actual trigger block come off?It just pops off with a screw driver, Dave. I had to replace mine doing my cams, was about £12 from VW, no need replace the sprocket.
Clarke Car Covers
in General Car Chat
Posted
Measured the car today, 12.5ft (3.8M) ft roughly so looks the medium which caters for cars upto 4.6M.
I'll have see what other sizes they do when I pop up tomorrow.