VR6Pete

good shout mate... will need some of these myself :)

nice, any pics of on the car? I know I'm being anal, but didnt really want the rolled tail pipe, but probably the best ive seen so far :)

Pete

ive got the HEX+CAN, was well worth the money, like Kev, scanned a number of cars, never had a single problem... paid for its self several times over...

I'd love a stainless system, but I really like the tail pipe of a standard VR's exhaust system.... and not seen an after market one with a similar design.

I've got a brand new Classic Parts one in my garage that I bought as a spare. Will sell it for what it owes me at £16 including postage.

I'll take it mate, can I see pic? :)

Bump... If anyone has one? I'm still in need one of :)

Bump...

What are the part number for these? I need a couple lol

I dont know why everyone sees it as a problem to be honest with taking the manifold off.

1) 10 minute job

2) you'd probably only change your plugs every 6 - 12 months for your average user

3) As long as your careful with the cardboard gaskets your ok..

4) Gives you an opertunity to check everything else in the immediate area is all in order...

ooooh, get you :) simples really!

I am a little confused and lost in all this CAD Jargon..... :)

What benefits would fitting these to my Corrado give me?

this may be on my list of things to do next year.... cheers for link for the terminals, ive got a burnt out one on my punto that I need replace, hoping that the terminals on this site will do the job :)

looks good mate :)

You can get the seals from VW still.

stick me down for a second one mate... just incase ;)

Pics please :)

Hi mate. Look for my thread on here for the hella radiators.

Hi,

some good quality photos would be good of the rear and top of the slam pannel if ok? :)

cheers

Pete

I require a late corrado VR6 Slam panel, the bonnet latch has jammed one mine at some point has has caused damange to the extent it's now all on the slant..

Ideally in L041, if not no big issue, must be in good condition with little / no rust, prefer item to be delivered, or if local to Stoke can arrange collection.

Thanks.

Pete

I also require one of the these if a second one comes up... same specifications as above :)

Yeah, how late is late? :)

Remove plug from abs ecu, even though it may look dry it more than probably ran down the loom straight into the plug / ecu... Had it with mine, and seen a few others on here with same issue... Have you tried getting it on vag com?

yeah, back in the day.... times have changed :)

In comparison to the rads ECP sell, the hella ones are very cheap, and probably built just as well / better than the ECP one...

I'm happy anyway with my purchase, pretty sure the car will run cooler than it ever has done, and it will probably wont need replacing again.

As far as I am aware, no after market radiators come with the elbow, its a VW part... and given that the VW rad's and elbows are obselete iits a non-issue id have thought, even when the radiators were available from VW, they were over the 200 quid mark easily...

I've just removed the elbow off my old radiator and have purchased new bolts / o-ring... job done...

only other option is to get the elbow from VW heritage or purchase the gruven parts alloy elbow...

Pete

Money is a little tight this time of the year :) and I needed buy a new front silencer too...

Reasons for taking the risk on this

- Hella, usually a reputable manufacturer

- StueyB has covered over 30k with his hella radiator, cant imagine my corrado ever doing 30k in the next 10 years :)

anything is better than the leaky radiator I have now :) proof will be in the running temps, but should be ok, new water pump, new coolant, new aux water pump etc...

Pete

yup, its a Hella... £86 + VAT + £10P&P

£115 to my door, really impressed.

http://www.radiatorshop.net/products/volkswagen-corrado-29-i--vr6