Jump to content

jonny-5

Members
 View Profile  See their activity

  • Content Count

    383

  • Joined

Everything posted by jonny-5

  1. jonny-5
    With the feedback received from various sources, these have now been discounted! Grab them quick!
  2. jonny-5
    Made a few of these a year ago and they went down well, got 24v versions now too. Please take a look; 12v: http://www.ebay.co.uk/itm/152663072201?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 24v: http://www.ebay.co.uk/itm/152744884683?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
  3. jonny-5

    Well, good news. I've started programming the brackets! Will be s little while but I aim to have a prototype mocked up for Xmas. Will keep you in the loop if you're interested?

  4. jonny-5

    Just saw this after messaging someone else about them! Yes, I'd love them. My email address is [email protected]

     

    Made my day, struggling to find people who still deal with Rotrex chargers.

     

    Cheers

     

    Jon

  5. jonny-5

    Hi, I am looking for a drawing of the required mounting bracket for a VR6 rotrex charger. An old post says you may have one. Would you be able to send me a copy?

     

    Thanks

     

    Jon

  6. jonny-5

    Hi, I believe you may have a drawing of a rotrex bracket for vr6. Would you be able to send me a copy?

     

    Cheers

     

    Jon

  7. jonny-5
    Had this for years, http://www.ebay.co.uk/itm/151691791608?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
  8. jonny-5
    Hi, I am after a g60 front engine mount bracket, not the rubber mount its self but the black steel bracket that joins to the engine Cheers
  9. jonny-5
    Hi, I am after a pair of rear carriers, as long as they're in useable condition - I'll be powder coating them anyway. Cheers Jon
  10. jonny-5
    Got a never used Supersprint 4-2-1 manifold, a set of KR cams and some Bosch orange injectors all at 99p no reserve for sale. Have a look: http://www.ebay.co.uk/sch/a63yoh/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
  11. jonny-5

    VR6 rad pack

    jonny-5 posted a topic in Wanted

    l, i am looking large radiator for my 20vt mk2 to fit between a rallye i/c, does anyone have a VR6 radiator assembly with fans and cowling available? Cheers Jon
  12. jonny-5
    Hi all, as it says really. Need the bracket that bolts to the engine and goes onto the rear engine mount of a 4 cylinder Corrado. Cheers Jon
  13. jonny-5
    Some of my prized VW possessions are for sale. Over the years i've gathered a 16v scirocco inlet manifold in the highly unusual 52mm variety, a full genuine g60 charger u bend set up, a job lot of G60 charger parts (displacers, shafts etc), an EFI fuel rail for use on a KR/9A type inlet manifold and an ajustable G60 water pump pulley. Please have a look: http://www.ebay.co.uk/sch/a63yoh/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
  14. jonny-5
    Hi, do you have a 9A coil I could have at all?
  15. jonny-5
    Great, hope so!
  16. jonny-5
    Hi I am after the inspection/dust covers for a 4 cylinder Corrado gearbox. Need the pair ideally, should be a large one at the bottom of the g'box and a smaller one about half way up. Cheers jon
  17. jonny-5
    I am also after a gearbox arm. I need the front most one that goes from the gearbox to the rubber mount. Ta
  18. jonny-5

    Pas reservoir holder

    jonny-5 posted a topic in Wanted

    Hi, I am after the pas reservoir holder for an early Corrado (I think it's the early type - the rectangular shaped res). The bit that joins it to the gearbox anyway. Cheers
  19. jonny-5
    Hi, my problem is that I have no stage one fan. Ive bridged the connectors at the rad temp switch with ignition on and can only get stage 2. I get no fan when the a/c is switched on. No fan run-on at all. Aux water pump works correctly and runs on correctly. Fan speed 2 works correctly - turning on at 105 and off at 95 (check through vag com). Don't think I've experienced stage 3 although I understand it's quite rare. What should I check next? Does anyone think this could be fan controlled issue?
  20. jonny-5
    Great stuff! Love how he's even chosen to use the plastic boot button rather than the aluminium one cos it's lighter!
  21. jonny-5
    I know some Corrados come with a flat rear bench in that there's know humped bit, but not sure if they had the lap belt in place for it. Also when I've done insurance before I had the option to select 4 or 5 seats.
  22. jonny-5
    Hi, I am in need of a G60 belt tensioner assembly, it's the one that bolts onto the supercharger bracket. I need the triangular arm with the the pulley wheel and the spring with damper also. Can anyone help?
  23. jonny-5
    Just found out. 750mm in length and 0.9mm ID
  24. jonny-5
    Hi all, can someone measure for me or does someone know the length of the G60 oil feed pipe to the charger. It's the one that supplies the charger with oil, should be braided. Need the overall length to the ends of each banjo. Thanks
  25. jonny-5
    Didn't know that either! That's cool then, save the hassle of drilling and welding if the pipe's still on the car
×
×
  • Create New...