Jump to content

W3RKD

Members
 View Profile  See their activity

  • Content Count

    3,897

  • Joined

Everything posted by W3RKD

  1. W3RKD
    There will always be traces of oil but no more than a coating on the pipes
  2. W3RKD
    it sits on top of the bell housing plate like a seal.. its the plate thats held on with the 2 11mm bolts. there should be a cut out in the plate for this to sit into also
  3. W3RKD
    That one is to big steve - it will not locate into the mounting fixings for the intercooler.
  4. W3RKD
    Sam the one i hve is the autorotor OA3133..
  5. W3RKD
    no.. m62 like i said.
  6. W3RKD
    191 121 253 P thats for the rallye.
  7. W3RKD
    there is a mouting kit available in the uk to fit a m62 on to a vw 4cyl engine from a company called aw tracksport. I have not seen the kit in person so could not comment on it but i know its available.
  8. W3RKD
    power tech's i think ... styledynamix do some simular to this
  9. W3RKD

    wiper mech question

    W3RKD replied to JT's topic in Exterior

    357 955 325 A there you go that for the linkage
  10. W3RKD

    JMC's G60

    W3RKD replied to JMC's topic in Members Gallery

    looks very nice jonathan
  11. W3RKD
    Paul > Did he use the m62 unit on there ?
  12. W3RKD
    Are you the guy that used to have the ibiza on e38 ?
  13. W3RKD
    The walls of the unit are 18mm solid billet so all im going to do is drill and helicoil 12mm deep and use 4x m8 fixings to mount my second bracket this will fit in the standard position of the normal g60 block mount on the right hand side.
  14. W3RKD
    Have you spoken to john @BBm about a mount ..He might allready have somthing to suit your needs
  15. W3RKD
    Your best bet would talk to somone when the cars nearing completion as alot will proberly change from the planning stage to the finish'd state. You realy need to get the model number for the unit you have and then you could do alot of your maths.
  16. W3RKD
    This conversion is not finished here yet either. we have been lucky in the fact a BBM mount fix's it perfectly on the pulley and and we will fab an additional mount for the back end also due to the weight. You will need to take this car to a workshop that has mapping gear once its complete have a chat with maybee sSm @ SNS as he might no somone local to you.
  17. W3RKD
    No it dosent. You can do it fine in place
  18. W3RKD
    the claculator on that link is very acurate it even recomended the charger i have for my engine and the power we are looking for it to produce. 440cc injectors will be a must and i would recomend a custom remap for the set up once you have it all up and running !
  19. W3RKD
    mine is rated at 1.3 litres of air p/rev
  20. W3RKD
    http://www.sprintex.com.au/Opcon_Autorotor.asp this should help you... i have one of these :wink:
  21. W3RKD
    Yes we have the pipework to run a lysolm in conjuntion with a rallye intercooler the only other change needed for you to have to do is run an electric fan flush in the std cowling to free up a small aount of room.
  22. W3RKD
    What make / size is the unit you have there please ? dont the merc's use a eaton M62 the one in the picture does not look like an eaton at all it looks more like a autorotor unit
  23. W3RKD
    I have had both lhd and rhd one in the past and they are handed. I have found them yes.
  24. W3RKD
    i would need one for a week to make a drawing from then send it back. i would think i could sell these for around £15.00 each if enough interest
  25. W3RKD
    If someone sends me one i could get them re-produced in aluminum then black anadiosed..
×
×
  • Create New...