Jump to content

brian g60 corrado

Members
 View Profile  See their activity

  • Content Count

    164

  • Joined

Everything posted by brian g60 corrado

  1. brian g60 corrado
    may buy some alloys 17s wolfrace with offset of 38 will they fit a raddo g60 ok will i need spacers ect the seller is andyg60and seems a good deal also were is best place to get tyres from 205 40 17s chears
  2. brian g60 corrado
    i have heard of a few people changing std shifters to b+m short shifters are they worth doing.what mods are required and do you have to change cables for best results.has anyone got one for sale or best place to get one from
  3. brian g60 corrado
    hi darren have you got your inter cooler set up yet and did it give much improvement over stock.nice to see you are keeping car now as it looks stunning .also are any of you still trading would like to purchase an rsr charger outlet if possible cheers.
  4. brian g60 corrado
    yes thats the add i was wondering if any one actually has one and if they rate them.also are they quiet or loud and do the rear boxes sit low
  5. brian g60 corrado
    might be worth changing rear mains oil seal (this is a cranksharft oil seal behind clutch pressure plate. iwould change if i had my box out. also the gearbox inputsharft seal _slider bush as if any of these leak it will wreek a new clutch
  6. brian g60 corrado
    stainless steel mongoose exhaust are they any good.its for a raddo g60.3-6months old priced at 125.full system front to back inc cat.are these systems any good do they fit o.k. has anyone out there got one.cheers.
  7. brian g60 corrado
    thanks guys ithough it was normal as it seems to cut out eventually,just though i would check with others
  8. brian g60 corrado
    has anyone had this fault or is it normal.when i park up and switch off engine lock car and a few minutes later rad fan cuts in like normal but also it sounds like the fuel pump also cuts in and operates for about 5-10minutes.if anyone can sheed some light on this would be great .thanks everyone this is a very good forum it has helped me loads
  9. brian g60 corrado
    hi guys has anyone had this problem . my raddo g60 revs high to about 3k mostly when first started from cold . i think i saw similer topic a while ago but unable to find .could it be isv and would an isv reroute cure this . :roll:
  10. brian g60 corrado
    thanks guys changed o2 sencer now running at0.5% but unable to adjust any higher [has decat} will this be ok as may fit 68mm pulley and chip now.also what other mods are worth doing to the g60 corrado as already have rs2 charger . and feeling bug for power now was going to leave standered any suggestions would be superb
  11. brian g60 corrado
    hi guys was wondering if these kits are damping adjustable as well as hight,also where is best place to buy uprated rear wishbone bushes from as mine are shot causing much torque steer -bump steer any help would be superb
  12. brian g60 corrado
    hi cssywraps i had same fault after much testig faund ignition switch to be faulty it was spinning over but no spark i found that when trying to start if i turned key harder it would spark and fire up . so changed ignition switch (behind ignition key )now stating every time hope this helps you out
  13. brian g60 corrado
    Thanks for reply I have a lambda sensor it is fitted and connected i think its working. Do you now how to check it properly, i also have new blue temp sensor.
  14. brian g60 corrado
    have a catbypass on my g60 was done when ibough it and unable to adjust co mixture below 4-5% car is standard apart from newly rebuilt rs2 charger also have 68mm pully and chip but as yet have not fitted. can i make or buy any kind of adapter to lower co% to 1-2% . or will i have to get chip alyerations on a rolling road ect. any help would be gratefull. also is it worth fitting chip and pully.
×
×
  • Create New...