brian g60 corrado
-
Content Count
164 -
Joined
Everything posted by brian g60 corrado
-
hi would like to know what mounts to fit corrado g60s. turn2,standard or mk2 diesel mounts . as my downpipe hitting steering rack on full load 1stand2nd gear. will need to get the usual front mount ,but what does everone recommend. :)
-
dazz how much and were to get :D
-
hi chis i have the exact same problem .have moded car inc stainless exhaust and had rattles ect. much time spent adjusting exhaust usual back axel knocking.now allmost there. just need to stop downpipe hitting steering rack , as yourself.new front mount looks like the answer.now do we need expensive special mounts or like alex says use one for a golf mk2 1.6 diesel. would like to know what others are using :? cheers all :?
-
changed coolant now no heat in car
brian g60 corrado replied to brian g60 corrado's topic in Archive
o.k. should i buy new recall valves or is it safe to remove them and just use normal tubing.is anyone running g60s without these valvesand mainly is it SAFE. -
changed coolant now no heat in car
brian g60 corrado replied to brian g60 corrado's topic in Archive
thanks for all replies.yes had the heater control on hot,as you look at hoses there is an alloy vale on top and a black valve on bottom hose.now is it a case of removing one of the hoses to remove the traped air.and which one any suggestions would be cool.also have tried running engine with ex cap off still no heat. -
as title says new coolant no heat in car.its a g60 raddo with the valves in coolant hoses that go to the matrix.head gaket previosly done was ok before i changed coolant.is there a method to bleed the trapped air.cheers. :shock:
-
did have a small amp and was better but got pist off with buzzing. maybe it was because it was a cheap amp tried all the tricks to try and cure but still had interferance.
-
the sound in my corrado sounds far to tiny .even after fitting new component alpine speaker set .i have a good sony head unit.even tried differant head unit still the same.all wiring seems o.k. has anyone else had this and what to do to cure .or do you have to buy realy exspencive speakers.cheers all.
-
hi darren sorry but could i also have some info and possibly some pictures thanks
-
hi all was wondering what is the most effective front mount intercooler to go for as a conversion.shoud i go get the biggest one i can find at a scrapy or get one from a golf g60 or rally ect. any advice would be appretiated. 8)
-
chears for your advise thought that pff85-204 had to be right.when i called powerflex to check with them they told me that the 203 is right for a corrado g60 .so now this shows how much even the makers know about there own product. thanks again will be getting the 203 changed for the 204. 8)
-
thats near me is it a show and were is it being held and what time as would like to go . chears... 8)
-
hi bought some powerflex frony wishbone bushes rears part no 203 they also sell part no 204 .does anyone know witch ones fit g60 corrados. was going to try and fit but no203 bushes did not look wide enought has anyone fitted thes bushes.any help would be gratefule.cheers
-
sounds to me like a relay faulty or wiring problem ,try tapping each relay one at a time while activating full beam this may show were your fault is.also visualy check all wiring. 8)
-
hi all what engine mount needs upgrading for a corrado g60 91.as cannot stop exhaust rubbing,mainly on hard acceleration.do ineed all to be heavy duty
-
thanks for info banana man have you fitted one on your car yet and if so did it make any improvements. any other mods worth doing to.cheers. 8)
-
thanks for reply could you tell me what car to get the one way valve from .and which way to fit it as you look at engine.cheers.
-
were can i get a check valve .ive herd they can improve idle and possibly creat a little more boost can anyone recommend were to go.its for a g60
-
hi darren how much for the outlets that are in stock now as you described as i am very interested
-
have tried method ie disconnected blue temp plug thee times adjusted co and reved three times set to about 1.2% running ok but when restated later it ran very bad so reset back to 450 to500omhs at co pot for timebeing . does the ecu have to be reset first and how do you go about resetting ecu on g60 raddo thanks all.
-
thanks gazzag60 will give that a go, does anyone else have any tuning tips on adjusting co mixture. or will i need to get on a rolling road . cheers
-
17s with ofset of 38 will they fit raddo g60 ok
brian g60 corrado replied to brian g60 corrado's topic in Engine Bay
thanks guys have bought wheels they are 7j 17 whith ofset of 37 and do not rub or catch anywere and suspention is standard.came with 2 5mm spacers for front if lowering so they dont catch ineer arches . tyers are 205/40/17and look very nice.will need 2 tyers soon does anyone know were to get good deals on new tyers.cheers all and thaks for all your replies -
hello all is it possible to fit 6.5'' speakers in front doors i know that 5.25'' is standard size .was just wondering if anyone has moded to fit this size.if not realy possible to fit without much moding .i would like to fit component sets what does everyone recommend for around £50-£80.as i would like to get rid of the tinny sound.cheers briang60raddo. :lol:
-
hi all can anyone inform me of correct way of adjusting co mixture on my g60 raddo.also at present the cat is removed and what should it be adjusted to.the car seems to be a bit flat on light throttle.has chip and pully fitted 68mm,rest is standard
-
RSR outlet... how much does it really do????
brian g60 corrado replied to CorradoKid05's topic in Engine Bay
hi guys i am thinking of getting this optional outlet i have the part no for outlet and gasket but would like to know if anyone knows part no for samco or similer adapter hose , and what is the total price for this upgrade compaired to rsr kit . cheers chaps