Kempy

no problem, Ive not had a look tbh, Im looking for the plastic bit to go in the door card first so its tidy. The bit you sent is threaded though, good job you spotted I would of botched something together otherwise

cheers, it arrived today just gotta work out how it fixes on

who were the guys that made the sheets?

cant find it :(

you gotta lift off the 3 white plastic bits under the dials, the dials have 2 flat head screws. once the dials are off the 6 gold/brass phillips on the cicuit board need to be remmoved. once they are off pull off the plug that connects the board to the bulbs on the outer case. then the board will be loose, Its a bit of a fiddle but it helps to turn over the case, then push the black connector out from the case might need a flathead to help it out. YOu then have the board free from the case, on the under side you'll see you need tiny torx screws to remove the LCD/clock and other bits. think this should help

cheers again. :clap: :clap: :clap:

I cant find the thread for the people that did this, does anybody have a guide for fitting, I've fixed my heater but It doesnt light up at all now? so I gotta get it out again anyway, thought I'd think about the EL sheet again

thanks colin

thats the badger. dont think they are left or right do you?

where do you guys have the low limit set, As where I have it now means I rev the pants off it everywhere :D

just looked at bently and I reckon the lock rod is missing :epicfail:

doesnt look like it, I have original handles, I'll take a look at a diagram and see if I need to buy a mech :confused4: I will also have the passenger side off to check to, might take a pic

doesn't look like its there at all cause I had the card off and normally you'd be able to see it in the space :confused4:

I have bought some door pins, passenger side is fine, but drivers side there doesn't appear to have the tread for my new pin to go on?? I had the door card off briefly but Its raining so I gave up, I couldn't see anything :confused4: Plus I'm after 1 of the cicle plastic trims that sits in the hole :D

i'd have a blue one if a GB revives

watch layer cake. she's in that

looks like I made some progress just now. It works on settings 2 and 4. I cant find the clips for the metal wired bits for the dials...whoops. Looks like the copper contact was the problem

you wanna get the macro setting on the camera :D right so my coppper is on the wrong side on should go underneath for a start, I think I tried that and it got stuck, I will have a look again today

dont think there are many people running 14's. too small. 14's do look good on a polo, but you talking about your rado right?

still no heater....can anybody tell me if my copper is right on the pics?

me thinks 14's are too small.....you can get 928's cut into P's :D

very cool I like it...whats the spec on the wheels? they sit well

buy a pink haynes for a passat, thats what I use for mechanical stuff, only one I found with a 9a

ive bought a few bits to tidy the car up, and started spraying me mirrors and gonna redo my number plate pannel as it fell off a while back and has started to crack the paint :mad2: I got all new parts for my licence plate lights.....which bits do i glue? if any?

cant really leave it too long, but the idea of it is to leave it there a bit to soften up the muck