trevor
Members-
Content Count
98 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by trevor
-
you can get super glue remover .but its not going to be easy for you to do . what corrado is it ? a g60 or 16v ??
-
back lit ??? tell me more . . . i've made some out of carbon and have now made a trim ring for the clock . will post a pic .
-
not me i've got a caddy 4x4 20v to do after the corrado . you will have to do it mate :)
-
should be fine .if you make a good solder joint .it don't get that hot . you can get it out from the passenger side no problem . take the seat out to give yourself some room . will take you a few hrs but it can be done with out taking the dash out .
-
i've got the tt 20v on my 16v all 312mm of them . takes a little work but it can be done . get 3 mm milled of the carrier and re drill the disc to 4 stud .
-
yes its still for sale . i only advertise on ere .
-
start again ???? not many around . i've not seen another around here . .
-
i.m going to fit polished little studs to show mhp and rpm but not numbers . orange studs for rev limit . they are from a 16v corrado . original clocks . just mede the faces out of carbon
-
let me know . look any good to you ??[attachment=0]dials witth rings.JPG[/attachment]
-
was one on ebay AUDI 80 2L cylinder head Item number: 270094610181 . have a look at this .you may get info off the seller
-
i got my pipe from Pipewerx .and made this system my self . if i lived closer or could of got the car to them i would of thaken that price . sound's good to me . the middle box on corrado is not really needed in my book . this is how it sound .on the 20v turbo http://s155.photobucket.com/albums/s295 ... nt=car.flv
-
i got a matrix out of a late corrado for sale £20 in the housing with the turn type controls ? any good to you ?
-
just seen on tidy vag . . :lol: looks very nice mate
-
http://[/url][url=http://s155.photobucket.com/albums/s295/trevorhutchins/?action=view¤t=MOV00197.flv]http://s155.photobucket.com/albums/s295 ... V00197.flv this is its first time out and its not finished . but it getting closer now :lol:
-
thank you for this . . i will watch it again and again
-
i've had a very good luck . . and . . it may be for the air con . . think its for diagnostics . as it does not show and thing plugged in to it in the bentley book . could only find small ref to plug on the top of the shock tower . with a green wire .
-
well not sure how many we would need bit if we put some names together . .i'd ask . . add you name to the list if you would like ddi dials for your 16v corrado old type clock with mech milage . . trevor :thumbleft:
-
make one . . got to be the best . . .
-
if you let me know the year of the car and engine size . colour of the wires . i will have a look for you . .
-
i don't think they will fit mate . i tried vrs rears on the corrado and they didn't line up with disk when fitted . these of a 4x4 will be diff again . you may be luck but will the disc line up ??? you may have to give it a try . good luck . would you let me know as i've got a rear end to sort out . .
-
no . . they are off set more and do not line up with the disc . . got some and tried them out r
-
i've been in contact with ddi to get some for my 16v and they don't do them for this clock set .. as it would cost to much to tool up for them . unless you could find lots of friends that want it done . . the asn is no . .
-
thanks for that mate it on and working now . :)
-
been a long time but how's the g60 going . .
-
can you give me details on your year and engine . .