Jump to content

C. Will Corrado G60 2

Members
 View Profile  See their activity

  • Content Count

    538

  • Joined

Everything posted by C. Will Corrado G60 2

  1. C. Will Corrado G60 2
    Hi, I went to a alloy wheel shop and asked for the same. After being told the wheels were obviously too big for the car. They gave me a set of nuts which were 4mm/6mm longer. You'll be able to get them from most good alloy wheel shops.
  2. C. Will Corrado G60 2
    Great I'll try this out, fingers crossed I get my heat back.
  3. C. Will Corrado G60 2
    How do you fix the stuck flap?
  4. C. Will Corrado G60 2
    Hi, I'm having the same problems as RACK, I get hot air for around 45 seconds thenit's cold. You say it's more than likely the relief valves, where are they? Is there anyway of checking? Chris
  5. C. Will Corrado G60 2
    Thanks for the info, I'll have to get on the phone and find out what the cost is. I'll post the prices when I get them. Cheers
  6. C. Will Corrado G60 2
    Henny, That sounds like a nice idea. What would it cost and what kind of power increase can I expect for a mod like this?
  7. C. Will Corrado G60 2
    Sorry mate, just swapped the PG lump for the 1H lump, so I can't be going down a swap route for some time. I just want to get the most out of the 8v 1.8 lump. cheers
  8. C. Will Corrado G60 2
    Looks like a good route for a 16v, mines 8v though!!!!! :(
  9. C. Will Corrado G60 2
    Thanks, I'll check it out.
  10. C. Will Corrado G60 2
    OK, that sounds more like it, I don't do many miles but do want the car to last. :D Looks like I'll stick with what I have and make it run a little smoother. Need to see what I get from a rolling road day before I do anything else. Do you know if any are being arranged in the near future near London? cheers
  11. C. Will Corrado G60 2
    Gavin, Wow 300 BHP!!!!! Out of a 8V 1.8 lump. How do you go about getting those kind of performance figures. I have the below spec which I think is around 200BHP+. Mods: Gas flowed head Stage 4 charger (Boost 15psi) 68mm pulley Custom front mount intercooler with 63mm pipping. High lift cams Green SNS chip 4-1 Stainless steel manifold Custom Exhaust What do you think is my next step? Cheers
  12. C. Will Corrado G60 2
    What figures can you expect from G60 (1H) engine? Would I get more out of the 1H than the PG? If so, do you know why as I'm unsure of the difference in the two lumps. cheers
  13. C. Will Corrado G60 2
    Don't think I could go to shops if I had this done :D :D Ok, this is a little be much but it does look cool as too. What do you guys think?
  14. C. Will Corrado G60 2
    Ok, I'll have to look at it again. Cheers
  15. C. Will Corrado G60 2
    jedi-knight83, When I tried to attached mine using a sticky strip (as I didn't won't to screw into my head light) the bonnet didn't won't to close properly. Did you have to remove or change anything? cheers
  16. C. Will Corrado G60 2
    jedi-knight83, How did you screw your eye brow spoiler on to the car? I have one of these eye brow spoilers but didn't know how to fit it. cheers
  17. C. Will Corrado G60 2
    What do you guys think to these?
  18. C. Will Corrado G60 2
    WRONG, WRONG, ALL WRONG Why do people ruin the corrado with bad styling? I've always like Performance VW magazine but what are they doing having a Corrado which has been modded to look like some bad boy racer's car "NOVA". SHAME ON YOU!!!!! I know the corrado is a hard car to mod but lowering a little, some nice alloys and new rear lights. You've got a "Phat" looking car. What do you guys think?
  19. C. Will Corrado G60 2
    Hi, I've been wanting to get myself a new debadged 3 slat grille and have been wondering which one to get for a 1991 corrado G60. Venom do one but say it only fits late C's where can I get one for a 1991 C? cheers
  20. C. Will Corrado G60 2
    I had this too thought the cable was damaged but after having a closer look it was the shelve under the steering wheel which was stopping the accelerator pedal coming all the way back up.
  21. C. Will Corrado G60 2
    I'm going to go see the VR6 and hopefully get a test drive and see for myself. having spent so much cash on the G60 and it being part of me now I don't think I'll be able to let her go. but.......lets see what the test drive does! I do so love the G60 noise and it drives like a dream. Wish I had ABS sometime though!!!!! :shock: cheers
  22. C. Will Corrado G60 2
    Hi, so you have any pictures? As i'd be interested if thier the right thing I'm after. cheers
  23. C. Will Corrado G60 2
    Ok, now thats the kind of info I wanted. I thought 300bhp with a bolt on supercharger was a bit good to be true! :) I've had to tune my G60 carefully to keep the engine sound I do understand whats needed to tune an engine well. How much in your opinon would the above mods on a VR6 cost? Cheers
  24. C. Will Corrado G60 2
    Has anyone here had both? If so, do you think the weight of the VR6 up front makes the car handle differently? Cheers
  25. C. Will Corrado G60 2
    WOW & WOW. The red C is rocking (apart from the RS vents), what size wheel are they? and the grey one well that just shows you how differently things can be done!!!!! I like it too.
×
×
  • Create New...