g164rge
-
Content Count
62 -
Joined
Everything posted by g164rge
-
Same pressure apply for 205/40 17's?
-
I had exactly the same prob last week, check the wiring down at the starter motor, mine had sheared off the crimped terminal with wear an tear, maybe check the battery has a charge in it too, as mine wasnt getting a charge due to the dodgy wire
-
Doubt you'd get under 7secs with a 25 extra brake tbh, might be wrong though
-
My G60 failed with no PAS belt
-
I noticed the mk2 valver is still 5 star as is the R5GTT and 205 GTi. Hmmm
-
Is it not ET35? I know its 4 x 100 though
-
Thanks for the guide Crasher!! 8)
-
think with Swiftcover my g60 is a grp 15
-
It was a cheeky sales pitch and probably too far to travel. The said (ins group 17 - ie the lowest) is . Ins Grp 17????
-
:thumbleft:
-
What difference doing this would it make to the engine?
-
quicky1980 Rack arrived very quickly as advised. Top Seller. Thanks
-
New Valver looks nice
-
The lever you pull to open the bonnet inside.... Make sure it's fully back - towards the bulkhead
-
Is the bonnet release catch fully home? I had the same prob on mine
-
Does Mk3 GTi suspension fit the G60? Thanx
-
unladen vehicle the spring should not quite be moving the valve, but not totally slack and wobbling about, so as the car drops with weight the spring will tug and open up the valve. :thumb right:
-
How can you set them after changing for a new one?
-
New engine's looking sweeeet!
-
Thanks David, muchos appreciated bud
-
Will ones from a Mk2 Golf fit my G60 ok? ie the same? Thanks
-
Thanks Coolrado, wasnt sure what it was made with you see, thought could acid dip it. Ah well, thats that idea out the window :lol:
-
Hi, Looking at rebuilding my charger and seen the kit from Eazygeezer. Are these kits good enough of should i get elsewhere? I'm able to get my charger acid dipped to get it all cleaned up, what kind of coating would be best to put on it after this? What kind of metal is the charger also made from? Any help greatly appreciated. Thanks
-
Awesome!!!!
-
Couple of quick pics, needs a good tidy up but the basics are there, will keep the thread going mod by mod. First step, lower it then get charger seen to.