Jump to content

G Charged

Members
  • Content Count

    132
  • Joined

Everything posted by G Charged

  1. i may run it without the charger...but id like to do it nice n proper if it makes sence 70bhp, lmao, that will make the g60 my slowest car
  2. lol, the pic makes it look better then it is, that rad support panel is gay... its still actually rusty there was a hole in it, and it was bent out of shape from a previous bodge intercooler fit, i hammered it back into shape, dremeld out rust, attcked the thing proper proper quick time with a wire brush and hammerited over it, just to get me by for now. i still want to get another one and get it shot blasted and then painted. no it wasnt jabba, i havnt had any dealings with jabba at all....to be honest im VERY surprised and a little confused cos the guy was sound...i dont understand how it was missed..cos everything else looks pretty spot on...but anyway.. shit happens people make mistakes, i cheked it and g-werks will confirm it for me....i really shudnt have filled it with grease to make it spin... oh well, we will see. student loan comes on monday...might get another charger, lol
  3. after i post the charger to g-werks to be looked at (was rebuilt but not by g-werks) and i get it back, it wouldnt spin, so i opened it and found the displacer/scroll bearing rusted to the shaft im toying with the idea of cranking it without the charger attached..but i think thats my being impatient, lol
  4. few more updates, theres no cooler attached, as the 1st oil change is gona be done after a short test drive, its to allow the engine to get up to temp and basically..one less thing to worry about, then the proper g60 oil cooler will go on along with the external oil cooler gearbox attached engine mounts being done up engine in!!!!!, mmmmmmmmmmm ....SPAFF! gona go bak up now and continue plumbing it in..mmm i cant wait now...
  5. Righto, been a couple days of highs and lows my full rebuilt charger(which i got rebuilt as i didnt want any problems) would not turn.... spoke to g-werks, i have changed my opinion on these guys, top effort!!!!, got me the mocal fitting bit i needed :clap: , anyway, and they comformed its not ment to be stuck... stiff maybe but not stuck... they offerd to check it for free, but that meant me posting it and losing time. I wanted to know if it was ok, fecked, or proper fecked, so me and pod split the thing open, anndd..... timing was out, and the bearing inside the displacer was rusted solid against the shaft.....not good..... I dont know whether the g-lader rebuild usually has the displacer bearing changed but i would assume so...i also dont think the aux shaft bearing has been changed...again i dont know if this is part of the process... anyhow will speak to the guys at g-werks again 2moro (and order me up some new oil feeds :) ) and see what they rekon... ...cheekly just to chek, we filled the bearing with moly grease, smoothd the shaft a touch, timed and put the thing back together...spins fine by hand now, but i would like the bearings replaced. anyhow, since the last update, rocker cover is on, water pump, supercharger brackets etc are on.., anyhow the pics will show. mmm polishedness....pity i didnt give it a buff before the pic, 1st time i polished one...pretty rewarding, rekon i can get it MUCH better next time ..the keen eye amongst you will notice the incorrect part..oh yeh and some more bits on oh wait whats that...cheeky orange pulley i see!! (will be a nice vernier if she behaves herself from now on) its a rasberry supercharger didnt you know?... what y'all think?
  6. ive been reading horror stories about peoples subframes collapsing :eek: any pointers to where i should check while my engine is out$?
  7. its going to be my daily driver basicaly, coilies will be coming, and probbaly a set of borbet a or kerscher carmona..not sure when as im a student and i already have 3 cars...i love my audio so.. one of my amps is 2500rms...mite see how difficult it is to fibreglass some 6.5" pods for the doorcard.., few pther bits n pieces, but i dont want people copying me so im not saying everything yet :tongue: ...and all this is dependent on if it actuall yruns when its back on the road lmao been polishing the rocker cover yday, looks pretty good if i do say so myself, beats paying £80 to buy one already done, im going to do the alternator today...and then set about, getting the cam pulley done orange, and a cutout in the cam cover
  8. cheers bally, you like the orange? :salute: i seen your car on here, niiicee, its mint, lovely colour and a perfect ride height :tongue:
  9. i found the box to block bolts were too short for my stand, so i got some identical thread bolts but longer junkie, yeh i signed up with dubforce just to see this other engine! its true though, the pics dont show the true colour, its actually preeeetyy damn orange, lol
  10. no...sumone else has a orange engined corradoo!, nooo mines suposed to be a daily driver boost monkey, i got 4 spare, if you send me a pre-addressed jiffy bag ill post em bak to you if you want
  11. cheers stu!, hmm..i think i'll have to fabricate some mounts as i welded over the holes and run the pipe in a similar fashion to how it was... finding a decent rad support panel seems near impossible!...any reason why that pipe runs out the front??? i got the bolts from a engineering place...ill have a look for you tommorow
  12. Havent posted much on the site, been runnin around like mad for last couple months, new to the vw scene, so anyone please correct me if theres a better way of doing anything i am Heres my G60 which i bought last year, had a crank bolt go on me, so i decided to whip the engine out and do a proper job sorry about the pics, i never did take a good pic of it have to say, this car is a little quicker then i thought...because of the torque you just dont feel the pace or something...but it seemed to keep up with suposidly faster cars :clap: then the dreaded crank bolt went, soooooo, here follow the progress pics, and a list of whats been done: Block stripped down cleaned &honed Block Painted chevy orange Brand new big end and main bearings New bolts all round new Mahle piston rings pistons cleaned up new oil seals Brackets, mounts, inlet manifold etc painted Volvo dark grey Crank reground and balanced Lightend flywheel(not my massive amounts, dindt want it too jerky) Sns stage 5 chip 68mm pulley cylinder head cleaned and casting imperfections removed Head polished with wire brush all round and clear coated on front face Rebuilt Head New Metal Head gasket(new head bolts obv) New sump as the old one was dented Mk3 tdi windage tray Oil pump was stripped and measured, was spot on! New water pump G-Lader which was sent to PSD for rebuild (and then to G-werks to be repaired..) G-werks pressure line G-werks front engine mount....lifetime garuntee...cant argue with that...i was gona order a vibratechnics one, guys recomended this and it was cheaper. Brand new Vr6 clutch baby Polished rocker cover Golf G60 intercooler Golf Rallye outlet some NTC Silicon boost hoses, will replace all when funds allow Repaired injector loom (using Volvo plugs:p) Vw Gates cambelt kit + pas belt Dayco aux belt..think i need a shorter one still, im using a 1640 with a 68mm pulley Setrab oil cooler, mounted behind the grille removing one of the horns mocal sanwich plate Bits waiting to go on: OPtima Red top battery Variable voltage regulator Future plans/purchases exhaust manifold...the casting on the vw one is terrible!!!!!!....but im not sure if i can justify spending the money on a manifold yet...i may take it apart at a later date, nice ported head and a mild cam, and then decide manifold Hid Kit...as the standard corrado lights are shockingly bad! coilovers! or anything you guys recomend...im trying not to just bodge this together, if a jobs got to be done, its got to be done proper as this is going to replace my GSI as a daily driver, and then i can concentrate with my chevette project, lol anyway, as promised, progress pics G-lader etc out, i dindt get a pic before i started Almost ready to come out ...half of her missing :( ...and does anyone know how that pipe which i found ziptied to the engine mount is suposed to run? hywel and phoenix, always time for a bit of childish humour :tongue: working late into the night as you do, but its ok, cos shes nearly out!!!! obligtory silly pose, engines out, bought a tear to my eye...or was that oil and grit :confused4: ...now im not no professional..but i think my problem is im missing a battery... car bak outside, mmm euro rear lights christining the new engine stand with some quality german engineering NOw arrange everything neatly, and label steam cleaning is fun, lol, no special effects here, engine was also gunked aswel result one clean engine block(no flash) which then got transformed into this, YOU KNOW WHEN YOUVE BEEN TANGOED!, chevy orange painted PG block bottom end built up, sump on, engine shrink wrapped at all times unless work is being done sneaky peak of my mate pods engine, williams engine to go into his 340r wil keep updating this, sooo what do the corrado massiv think?
  13. I dont have much experience with the vw engines, but i do have a bit with vauxhalls, redtops etc i would say, give her a good going over, take her to bits, take the flywheel out, get it lightend (use new bolts), and then have the whole crank assembly complete with flywheel clutch etc balanced(and re-ground if needed) local engineering place should be able to do that for you, i just had my G60 one done, cost me £200 which included new oversized bearings for the bottom end some new rings and possibly a re-hone, but you would have to inspect the block to see if it needs one, while the heads off, get new gaskets can get these from GSF,you can get a full head kit, and new sump gasket. Dremel out the ports on the head + inlet and exhaust fanimolds, matching these to the new gaskets, as youve gone this far, mite aswel treat her to a new water+oil pump.(would personaly say get VW ones) The heads are pretty simple to rebuild, get her acid dipped to clean it up, and re-lap the valves, you shudnt really need to get it skimmed, but that shud be £20 odd New cambelt kit, new bolts etc... rough idea of prices..this is for my g60 new bolts, rings, seals etc - £250-300 crank balance+lighten flywheel + hone- £200 head kit - £80 vr6 clutch - £80 oil pump - £120 i think it was??? windage tray(sump gasket) - £21 it does all add up, although id look at doing a vauxhall boys trik and using bike carbs if you can 8)
  14. i got mine from gsf aswel, cost £21, cheaper then the ones on ebay
  15. darryn, is the new pg bolt actualy redesigned?...or is the ARP kit much better...£33 isnt alot if the bolt is better and not a compimise job
  16. Yup, she sheared her bolt off on the way back from work, doing 40/50mph in 5th, slammed clutch down ASAP.. shit happens, im not fuming but im little anoyed as i orderd a crank bolt and pulley 2 days ago as advised by Pitstop developments(steve who incidently is a proper sound bloke!!) ..this was after VW telling me its a non listed part 2 weeks ago...got oil cooler, new sump, serviceing bits, sensors and what not lying in the living room, was gona order a FMIC next week :( took inlet pipes off to see if itd killed the charger(i dont know..just having a look...) annnd theres a only a fine mist of oil, nutin major, gona pop out to my mates where i towed her to and inspect further... all in all, merry xmas lads and ladesses!
  17. Arse biscuits and Penis :lol: :lol: :lol: Quality! hammond takin out the mosler, didnt get a good look but i swear it wasnt his fault though...
  18. being a student and owning 3 cars ..i can afford to run my G60 just about...petrol isnt the problem, its spending the money to get it to a state where i can drive it and not have that voice in my head sayin "its gona break down haha" if petrol gets any more expensive, and i struggle...ill just eat once a day :lol: , the beer budget shall not be altered 8)
  19. we fit loads of these downside is, the unit doesnt have any pre-outs so if you are thinking about using a amplifier...well..you cant, unless you use a h2l converter
  20. my motor seems fine to be honest with you, but i got a spare motor incase:p i am gona grease the runners, and it doesnt seem to be poppin fuses (yet..) need to get my cooling situation sorted, cos im getting tired of having the heaters on full hot blast and having burning ankles, lmao
  21. lmao, yup, but at least you know once its done its gona be done proper! taking the dash apart on these isnt difficlut at all. i do need to find some wiring diagrams though....looks like the bently manual may be my next purchase...but i did get told from a reliable source its available online as a pdf for free....any hints to where i may find this will be appriciated! veedub21, if you need, i have a spare switch you can have for the price of postage, otherwise ill just keep it incase mine fails, i seem to have traced all the wires for the spoiler, its worth noteing that the green/white and blue/white wire from the motor actually change to solid yellow (and green i think...?) in the left of the boot, in a plug.
  22. and today decided to have a look at the speed activation on the spoiler, wohoo, i got it working!! decided to take out the centre console and clean up the wiring a little, and wired my remote amp lead into a spare heater switch :D coudnt neaten it as much as i wanted due to the alarm wiring, so im gona rip the alarm out, sell it on ebay and fit one properly. 8) managed to identify one of the rattles in the car too, little bracket that 'i think' holds the undertray on, cos i coudnt see anything else that looked straight forward there, will 'deal' with him tommorow when i put the interior back together also theres a red and yellow wired plug which goes no where on my car, im assuming its a glovebox light, but my glovebox has no light... that and i have two ariel leads:confused:
×
×
  • Create New...