weetos
-
Content Count
259 -
Joined
Everything posted by weetos
-
202,000 on me G had head off at 190k and all looked sweet :clap:
-
Are the heater boxes for early and late cars the same also would a mk2 golf one fit? (i have an early car and mine is shagged)
-
£300 here :cuckoo:
-
Ripped out heater box to replace matrix, discovered that said box is shagged :brickwall: :brickwall: :brickwall:
-
i had simlar problem viewtopic.php?f=1&t=75275
-
later C's are 55-ish mph ahh I sit corrected
-
"The rear spoiler works as it should, manually and automatically at 55mph." I thought it came up at 45?
-
Matrix i'd bet but comp test first cause a bit of a mare of a job
-
is your screen misting up more that normal?
-
I concur with toad this happend to me last year
-
blue temp sender probbably
-
I think color coded grills look better on darker colored cars as you say its the plastics that will look out of place on a red un so same as pic
-
I take it you mean leave the grill black. if so then i would personally leave it black as it offers a contrast to your red c
-
I've heard about this before, IIRC they run a bit cooler can't confirm though :confused4:
-
nice i'm currently on 198,860!!! :norty:
-
Not even funny. (G60death.) - Insurance quote in.
weetos replied to Rinse's topic in General Car Chat
NNNNNNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO :brickwall: After all that on here viewtopic.php?f=1&t=85114&start=15 you must be gutted.......glad to hear everyone's ok though. your claim will be very straight forward, i would of thought . gud luck with that -
:brickwall: :cuckoo: :gag:
-
check this thread out viewtopic.php?f=1&t=75275 worked for me :clap:
-
engine? if G60 could be digifant control relay or something simple like plugs / leads/ rotor / dizzy cap
-
8) no probs just remember the hose has to be exactly 1m long and 3.5mm id
-
Thats what I put them at, but i've just realised that the dizzy isn't in the same position as the photo I used to place em. This is the photo I took the order from. This is how mine is now. there should be a little line on lip of the dizzy under the cap this should be No.1 work clockwise from there
-
Bottom crank bolt ok?
-
wheel spacers needed rubbing on inner arch towards the front or don,t go full lock lol!
-
yes
-
45nm or 33 ft lb for pulley 15nm for banjo joints