Purple Tom

Hi David, Got your PM, I'm not willing to take the sunroof mech apart as it is fully working. Not massively keen on posting it either as I've had one damaged in the past despite extensive packaging. Price wise £50 collected including the motor. Gareth79 - Yep, got that trim piece, £15 posted for that (£10 for the trim, £5 postage) Cheers Tom

I've got a full set, working and just removed from a 94 VR6. All working and slider bolts moving freely etc. £25 posted to you (£15 for the brakes, £10 posted) Thanks Tom

Hi Gary, I've PM'd you. Cheers Tom

Black dub - they're in original condition, never been off but how desperate are you? Not got the engine out yet so they're not that easily accessible... Jim Bowen - Yeah I've got that, £15 posted. Cheers Tom

Yes I do, £15 posted.

It's just via normal Royal Mail but yeah that's fine, let me know, got loads of stuff and it makes sense to combine it all as one!

Derbyshire postcode DE7, 15 mins from J25 M1.

Pictures as promised: Apologies about the sunroof and interior light wiring dangling down. I folded the visors down so you can see under them. All clean and in good original condition, not a smokers car! Let me know if you're interested. Cheers Tom

Pictures as promised: Wouldn't have thought it'd cost a fortune to post it to Dublin - £15 posted matey. Cheers Tom

Yes Scott it does work and all those items are available. Postage is a different matter though, it's very likely to get very damaged in transit! Any chance of you being able to collect?

Do you mean the fan shroud and housing? Or the plastic trim just above the rad on the slam panel?

I wish you'd said when I posted the ABS ECU to you [emoji1] I've got a couple of these, I'll dig them out tomorrow and confirm the condition for you. Cheers Tom

Yep, I've got one. Can get you pictures tomorrow but it's from a 94 VR6. £25 collected from me in Derbyshire postcode DE7 around 15 mins from J25 M1. Thanks Tom

Chuggs- I've checked all of the spring plates that I've got and unfortunately they're all the later type smaller ones. I've ran those successfully with aftermarket springs though....I take it the ones you want are not available from VW anymore?

Wesley - pictures of both sides. Unfortunately it's the passenger side that's been repaired I'm afraid although it doesn't look too bad: Let me know if you're interested. Fla - It is a drivers side regulator that I've got. In full working order: Robrado - haven't got as far as getting the heat shields off yet but it's on my list! Cheers Tom

Received, it's all packaged up and ready to post in a bit. I do have that part but I'm selling it complete with the bonnet cable and sleeves etc, not by itself.

Hi Dave, I have both of these. Just removed from a late VR6. £40 posted for the pair - £20 for the cable, £15 for the switch and £5 postage. Let me know if you want them. Cheers Tom

Hi Chris, I'm shortly going to be removing the pedal box from the late VR6 that I'm breaking. I also have the clutch master and slave cylinder along with the hydraulic pipe with flexi from master to slave. Is that what you need?

Ok!

Due to the rarity of them and the fact they suit the Corrado so well, I'd really like £200 for them to be honest mate.

Diarmaid - PM'd

Okie dokie, I'll have a look for you!

Diarmaid - only one front fog and unfortunately it's quite badly damaged. I'm going to have a go at repairing it. The MAF is available and in full working order. £50 posted. Robrado- Not 100% sure on the condition of these but they're generally good when I've removed them previously. If they're ok then I'd be looking at £50 posted for them all - a fair bit of that will be postage as they're quite bulky. Wesley - Yes I have both sides. One is perfect and the other has had a repair. I can't remember which side is which but I'll check tomorrow and get back to you. Fla - Allow me double check the one that I've already got. Fairly confident it's a drivers side. If so then £35 posted as again it's a fairly bulky item! Chuggs1 - I'm thinking you mean the top spring cap that fits between the spring and the top mounts? If so then I'll need to measure the ones I've got although I'm fairly sure they're all standard so might not be what you're after. I'll let you know! Thanks Tom

I'll get back to you ASAP in relation to those Jim!

Hi, I'm sad to say that I'm about to make a proper start of breaking my last Corrado. It's a 1994 VR6, in dragon green, pictured below (taken today) I bought it around 18 months with the intention of another project and potential TDi conversion but unfortunately real life got in the way! Details: 1994 VR6 160k miles Already gone: Interior and doorcards Dashboard shell Both front wings Airbox Drivers door handle EVERYTHING ELSE is still available. The car does have a dealer installed Diavia air conditioning system which I have partially removed in order to repair a leaky radiator. It all appears to be there including the compressor, radiator, condenser, all pipework, relays, look and switches. Also present is the original Diavia paperwork detailing the installation. If anyone is interested in this, please let me know. The engine can currently be heard running and sounds great, despite its mileage. The oil is clean and it starts very well. I am fairly confident that it's had the chains and tensioners done. I am willing to sell this as a complete conversion or split it and sell individual parts. I have scanned it with Vagcom and there are no fault codes. The wheels are 16 x 7 BBS Pininfarina 5-spokes. Very nice but in need of a refurb which I may get done prior to sale. If anyone is interested though let me know. They do clear 312's however unfortunately they have now sold! I'm not going to list every part here with a price. As per my previous breaking threads, I prefer it if people enquire as to what they want. Either on here or via PM is fine. Please bear in mind that I have broken three other Corrados so have plenty of parts in stock, again let me know if you want something. I tend to price low to get things sold rather than hold out for high prices on everything too. If it can be posted then I will quote a price including postage. A couple more pictures: Thanks for reading and like I said, please let me know what you want. Thanks Tom