Purple Tom

I don't actually think they do. I'm fairly sure that they run behind the dashboard from the drivers door to the passenger door as I've just broken a VR and I'm sure I spied the vacuum pipes up behind the glovebox. Someone should be able to tell you for certain before I can get back down the car but I'm fairly positive that's the case. Tom

Ok Paul will be able to get a couple of pictures tomorrow for you :) Cheers Tom

Ian - sorry, I'm afraid the ISV has gone, I'll update the first page soon! StueyB - the heater motor was knackered I'm afraid, just the ABS pump if you want it - PM'd Rishi - PM'd

Alan - recieved the payment fine and posted today, should be with you soon! _Andy_ - still can't PM you, try emptying your sent box too... Rishi - yeah they're for a VR6, 5 stud, is that what you need? StueyB - you're welcome to pay £35 if you really want to, but as I originally quoted £30 posted I think I'll take £30 :) PM me if you want it! Cheers Tom

Yeah I'll take £35 posted Alan - PM'd

Who needs an air freshener? Do a wheelspin and it smells of roses? Awesome! :D

I had the same problem a little while ago and it was the rod from the central locking actuator, exactly as supercharged has described. I replaced it with a spare one that I had on my donor VR6 but once I had it apart I could see how easy it would be to change the small plastic item that wears.

I've got one on the Corrado I'm breaking mate - Breaking Thread It's in good condition and because of its size I'm looking for £35 posted for it. Alternatively as you're only in Tipton you're about an hour away from me so £20 collected. Cheers Tom

Hi Phil, I've got both of those parts, just removed from a 1995 VR in good working order. £15 delivered for all of it if you're interested. Cheers Tom

Sleeper and slammed - PM'd Rishi - the discs are still available but I had to nab the pads for my 8V. If you want the discs I'd do them for £22 posted as they're pretty heavy! _Andy_ - if you still want the PCV please delete some messages from your inbox as I can't PM you a pic! Cheers Tom

Land Rover Discovery Series 1 uses Maestro van tail lights The original 5 door Range Rover uses Morris Marina door handles Parts bin specials :)

Delfinis - sorry, I missed your post. I do have the headlamp switch and it works but one of the rocker arm tabs has broken. I'm going to repair it and then advertise it so bear with me! VR6 - The sunroof lid is quite scratched where somethings been caught as its slid I'm afraid, unless thats OK? No fusebox clips and the foam pads just disintegrated when I tried to remove them. Both parcel shelf straps went onto my 8V I'm afraid. The ABS lamp is available but the casing isn't the best, it's cracked around the edge at the back however it doesn't affect how it works as it was working when I bought the car! Can get a pic if you're interested... Cheers Tom

Stuey - I didn't Vagcom the ABS, only the engine because I'd taken the ECU to diagnose a fault on my other Corrado. The ABS worked though so I'd assume no faults logged. Slammed16v - fogs have gone but the rear lights are all available and in good nick - £35 posted for them. 4eyes - Yep got that, its in pretty good condition will PM you a pic. Donjon - starter available and working fine. It's quite heavy so I'll say £40 posted for that. Cheers Tom

Hi Ian, I'm just waiting for a payment to clear for the ISV. If it falls through I'll let you know. Cheers

Jimpy - one of the headlamps is indeed broken, but I *think* it's missing the circular cover from the back of it if I remember, I'll check tonight! VR6 - I'm afraid the wings aren't available as one has sold and I'm going to keep the other as a spare. nsmjl02 - Yeah I've got both of those, took them off yesterday, £12 posted for the pair if you want them. Cheers Tom

Might be worth trying to turn the 'box a little bit. If I recall there isn't a synchro on reverse on those boxes so you'll need to get the dog teeth pretty well aligned to get it into reverse gear by hand from the shift tower. Another thing to try (I assume the car is driveable as you've had it up to temp) is to safely support the front of the car on axle stands so the wheels are well clear of the ground. Chock the back wheels (or better still tie the car down) and then run it up and down the gears a bit to get at least a bit of oil pressure and temperature in the gearbox. Then see if you can get reverse...

Sorted...PM'd :)

Rob - PM'd Cheddarcheese - Yes I have the speedo sender unit, £15 posted. emu - tried to PM you but because of the forum changes I think your inbox is too full. I've got the message waiting to go to you so delete a few and I'll be able to send it :) _Andy_ - re. the PCV - tried to PM you too but your inbox needs empyting a bit. andy35554 - none of the suspension is available I'm afraid. The fan was very broken so went in the bin, and I'm afraid the rubber exterior strips aren't available either - sorry to be of no help whatsoever! Yandards - I'd love to say yes but they're happily sitting on my 8V now I'm afraid, they seem to be quite a rare part!! 1xshaunx1 - the mirrors are already spoken for, sorry! Think thats everything up to date so far, if I've missed anyone out then please contact me!

Cazza & Zippy - all of the coolant hoses are still available. I'm hoping to get them off within the next few days so I can get some pictures for you then. Judith/Kip - no worries, will get pics asap for you :) R0B - pics sent Sam - understood mate, I'm not a million miles from you (an hour or so down the M1) so if you want to come see the interior let me know. For everyone else waiting for pictures of bits of interior trim - I'm hoping to get the interior fully apart tomorrow so can get pictures for you all then with any luck. Off out for the afternoon now, thanks for all the enquiries so far :D Tom

Mark - haven't looked at the tank straps. They'll be original so not immaculate but I'll get some pics as the tank is coming off soon. Swompy - they are black but emu has already said he'll have the centre tunnel trim, however I'm not sure whether he wants the gaiter and trim. I'll find out and get back to you - to answer your question yes they're black and in good condition. Andy (C5 OEM)- sorry but I'm going to hold out for £60 posted for them. They are worth that and if they don't sell I'll keep them as a spare for when they stop working altogether in my 8V. Andy - I do have all the dash undertrays and the column shroud. Would prefer to sell the shroud complete if I'm honest but I'll get some pics for you. Robrado - I do still have both tabs (I presume you mean the little plastic covers?) £7 posted. StueyB - fans have just sold I'm afraid, ABS Pump is available and is the 6 port type with traction control. £30 posted for that. Norman - PM'd Skid - roof gutter trims are average, no rubber left on them, can get pics if you like. ROB - the front bumper is available and to get it shifted its yours for £20 collected. Its not immaculate as it has a scuff on the corner but would paint up nicely with a bit of work. iceviolet - I'd love to say yes as I've met you personally however I don't want to accept 'dibs' on it only to find that for whatever reason you can't buy it or change your mind etc. If its still available when you return then of course its yours if you want it, but I don't want to take it off sale until its a definite buy with a deposit to secure. Hope you see where I'm coming from. Judith - the crossmember is still reserved for you as I haven't advertised it. The enquiry earlier in the thread is referring to the subframe which is also called the K-Frame and is the bit underneath the engine at the back of the engine bay that the wishbones/ARB/rack bolt to. Unless there's been a crossed wire I assumed you wanted the front crossmember and also the radiator support if its good? quicky - I won't sell the loom seperately unless you can find someone who wants the rest of the interior and organise it between you. I think if someone is fitting heated leather then the proper OEM loom is way to go as its designed to do the job so it seems a shame to devalue the interior by selling it without the loom. Sorry. Think thats answered all the enquiries so far, keep them coming :) All those who've requested pics etc I'll get over the weekend as I'll be down at the garage most of the time. Tom

No worries, it might be a bit sooner than that it just depends how quickly I can get the engine out. It's amazing how much room a car takes up when it's not all bolted together :lol: Tom

James - please read the first post, the wishbones are unavailable. However the subframe will be and I can get that off within the next couple of weeks and get some pictures for you. Cheers Tom

Matt - always up for a bit of negotation but bear in mind how bulky and (relatively) heavy the inlet manifold is - postage isn't cheap :)

emu - I'll get the trim off on saturday and get pictures of all the bits you want so you're happy with them before making a deal. Tom

Abdul - headlining is the usual Corrado colour - grey/white ish I guess! Carpet is black though and in good condition if you want that? Tom