Jump to content

millerman

Members
  • Content Count

    840
  • Joined

Everything posted by millerman

  1. sounds like you could also do with changing the fuel pressure regulator and have you checked the vaccum tubes around the throttle body ? both can cause bad idle problems and get some electrical cleaner and clean the MAF but remember to unplug it first and give it 20 seconds to cool down if you do it after driving !
  2. liking the muse at the moment in particular the haarp album of the live gig and their new album is also very good :D
  3. thats easy bmc cda tried most and thats the best
  4. you need to remove the spinning washers and scan the web mate you can get em from b&q but they are £12 quidd odd do a search on google the pic i posted was from an ad stating they were £5
  5. no probs mate anytime just give me a bit of notice :D
  6. yes they are unique i had em on my rado ended up bending a pin on the key hence my above post
  7. spray it with a satin black rattle can :lol:
  8. so what wheels are they they look sweet 8) and so does the rest of the car too :lol:
  9. saw a red 16 valve on saturday anticlockwise on the m25 just gone pased jcn 14 fella and his lady onboard i was in the bmw so would have looked silly waving :lol:
  10. a gator grip bolt remover will get these off it looks like a normal socket and has loads of steel pins inside hammer one over and remove chances are you will knacker it getting 1 off at a time so i sugest buying a couple but it does work (i know i have tried it :D ) and no i was not half inching wheels :lol:
  11. if its a mk3 vr set up should fit ok anything else i would say no
  12. :lol: nope but lost count how many times i have serviced my vr however i can also vag com it to check for other probs its really quite easy once you have done it several times :lol:
  13. ahh no probs glad you like your new motor so how much are they the passat cc gt looks very nice in the pics i have seen what colour did you get ??
  14. are M5's not 500 odd bhp ???
  15. sounds good to me :D my bmw got scraped by a cock driver at my work and to respray just the rear bumber as all he did was scratch it cost £450 :D
  16. always thought that overrun was caused by poor timing !
  17. not sure what causes it but just for refrence mine was lower bhp on 178.8 torque was 175 ft lbs but mine had a fueling problem as the afr droped of sharply after 5500 rpm
  18. nice one mate must do mine :D
  19. leave it with me for the weekend and i would do it for ya for £300 :D inc parts
  20. can you get a buggy in there then :lol:
  21. trip to maplin i think :D
  22. bm 1 series i had 2 they are very good
  23. i would say you have to empty it !! its for catching oil from i would guess the breather pipe from the rocker cover rather than it all go back into the engine you would have a catch tank there so you will need to empty it every couple of months or something like that
  24. i saw a couple of rados whilest on holiday in hayle this year beleve 1 was a valver and the other a g60 saw one just outside barclays /lloyds bank near the train bridge and the other up by the surf shop oppisite co-op :D
×
×
  • Create New...