Jump to content

RaddoMan

Members
  • Content Count

    179
  • Joined

Everything posted by RaddoMan

  1. yeah that didn't fix it , in the end i have cleaned out the MAF sensor crud all over it , still in the wet missfires .... till it warms up fully , lamba probe wires or the probe? Raddoman
  2. by doing i am the kid wheelspins , she would soon sort the mid's out
  3. found it , cap and rotor arm , thats stuck fast whats the best way to remove it , hammer? :D
  4. did you find it ? mine has got the same sort of missfire , only works at full power not good for town driving
  5. it will come out , just push down the wire and get a screwdriver , get the old one out
  6. ouch i am stuck on that one , but you should get out the old plug , then i guess its 3 wires , you might need a new sensor?
  7. just don't take a strimmer to it
  8. mine was stuck in one pos , it was full of crud from the body , set for 3000rpm . yours is doing the same thing so you might have the same crud in yours
  9. it needs a gun hanging out of it :clap:
  10. thx mate , so i have to get the obd2 to obd 1 cable too
  11. the code reader is a nice portable way to do it , btw where does it plug in? on the ecu ? Raddoman
  12. or know one very well :D
  13. yeah i need it my abs is right on the blink
  14. http://cgi.ebay.co.uk/2X2-Adapter-Cable-VAG-COM-to-OBD2-OBDII-2-plus-2-OBD_W0QQitemZ300403449205QQcmdZViewItemQQptZUK_Diagnostic_Tools_Equipment?hash=item45f170dd75 and http://cgi.ebay.co.uk/VAG-COM-USB-DIAGNOSTIC-CABLE-409-1-OBD2-II-LEAD-VAG-COM_W0QQitemZ330399696070QQcmdZViewItemQQptZUK_Diagnostic_Tools_Equipment?hash=item4ced5b44c6 will do for my 2.0 16v? the plugs are under the gear cover?
  15. make sure there back in right you can slip them down the sides
  16. there good man , sorts out auto tilt seats :clap:
  17. have a look at the abs rings see if they need a clean
×
×
  • Create New...