16v_alan

alright. i'm looking for the rubber trim that goes along the bottom of the window on the drivers door. this'll have an aluminium strip reinforcing it, this has to be nice n straight n not deformed, unlike mine.. if you have it, a price posted to portsmouth would be much appreciated

alright. i'm looking for the rubber trim that goes along the bottom of the window on the drivers door. this'll have an aluminium strip reinforcing it, this has to be nice n straight n not deformed, unlike mine.. a price posted to portsmouth would be much appreciated

alright i'm after the lower window rubber trim on the drivers side, in a undistorted good condition. posted to portsmouth please cheers

alright tom i'm looking for the rubber trim that goes along the bottom of the window on the drivers door. this'll have an aluminium strip reinforcing it, this has to be nice n straight n not deformed, unlike mine.. a price posted to portsmouth would be much appreciated good luck in your new job cheers

alright i'm looking for the lower rubber window trim that goes on the drivers door. straight and in good condition, if you please? thanks

yea same symptoms as mine...turned out to be a tired motor managed to nab one off a mk3 at the scrappies best rule that out before stripping the headlinning etc etc..

is this still going, and are the discounts still available?

i'll go for a black one please msg me your details cheers

hello mate fancy some speedlines? check out this group buy: http://the-corrado.net/showthread.php?62625-16-quot-Speedline-4-stud-fitment&highlight=16%27%27+speedline

alright, is this group buy still going? just been advised by rimstyle, after placing my order, that they don't have any of these wheels in stock as advertised: http://www.rimstyle.com/alloywheels/detail/?car_model_id=12820;wheel=speedline_corse_challenge_2110_ss;dia=16 they told me that they've been onto the uk importers who only get them in when the order is big enough, and haven't done so for a while. they also cannot advise when that is likely to be either. my valver is due back from the spray shop end of the month and really wanted to slap the new wheels on it then, but if i'm gonna be months waiting, might have to look at a temporary solution. so yea, put me down if this is still gonna happen. also might be worth moving this to the forum group buys section, generate a bit of interest? cheers

leather grain sounds good put me down for one please

hi guys i've had a scan of previous posts and haven't come across the same symptoms described in a similar situation.. i've just returned home after working overseas for a year. had the c garraged before i left. last week i rolled it out connected the battery etc started fine, changed the oil, booked it in for an mot. drove it nice and gently to the mot, passed, drove home. got car tax couple of days ago, so i'm all set! went to start it yesterday, and it starts fine, but only if you give it some gas and only stays running if your foot is on the accelerator. i had it running in the driveway for close to half an hour to get it warmed up, but still won't idle independantly. i've driven it 10 miles up the motorway, but will still cut out when you pull up at a junction, or put it in neutral and allow the revs to drop off the only thing that's changed between now and when i got the mot is that it's sat out in the rain for a couple of days after looking at other posts i'm wondering if it could be the throttle body microswitch, but could do with some advice to point me in the right direction. thanks alan

following on from this... what year passatt did you yank this from? i've got the opportunity to nab one from a '98 passatt saloon, but i need to be confident it will swap for mine before i pay old matey to crane it down.. cheers