PaudieG60

As above, looking for an automatic g60 throttle body or something similar with a tps that can be used on a g60 that's to be mapped. Please let me know if you have what I'm after.

Ide change the small belt on the charger, they've been known to let go. Need a few myself so if i come across them I'll pm you where i get them

Who's supplying the small belts? Ive run out of spares for the next change

Reset the idle on her after the o2 sensor is done

Im presuming this is whats ment by G2 10 and 11 http://www.a2resource.com/electrical/CE2.html

Thanks, I'll be in touch when i tax her again

Might take you up on that some weekend if you dont mind!

What do people use to replace the foam with?

I could be wrong on this but a shorter front engine mount would raise the back of the engine/ manifold to clear the rack? I had the opposite problem in the past, fitted a taller solid mount to take the manifold away from the heat shield on the tunnel

Ah I see, hope it all works out now! I had alot of issues with the isv, binned it a few weeks back and the engine is alot happier without it! Looking forward to your next updates!!

Pm sent

As above, Looking for the complete kit, If you have one or know of any that may be for sale please let me know.

She's a dream to drive!! Dumped the isv and drilled the throttle body and it transformed the idle and how she acted at low revs coming to a stop. I haven't read too far back but from what I did read your nearly there!! What manifold did you go for this time

Hey Yan, anymore updates? I finally got my 16vG on a rolling road yesterday, 241 with 215 torque. Thanks for all the advice over the years, made my life alot easier!

I have a new bosch 4 wire oxygen sensor to fit to my car to replace the universal item fitted. Old plug was cut off to fit the universal item so I need to fit the correct plug. If someone has a cut up loom or knows where I can pick one up please pm me.

Yea sorry its sold

All 16v stuff is sold, Still have the injectors and 034 motorsport fpr

No problem at all! Thanks for the tip on arz, haven't gone looking yet but no I have somewhere to start.

What are they actually worth?

Best I can do with that is 320 posted {courier is costing me 30} May be looking for a vr6 fuel pump but I will be buying new if I am. Also may be looking for a vdo 52mm psi boost gauge{without turbo written on the face and green light to match dash}

Clearing out parts I don't need now that the 16v is finished. -Rocco 16v 42mm inlet manifold -Custom fuel rail, braided fuel lines, 3bar fpr -BBM 16vG60 elbow {to clear distributor} -G-werks 16vG60 chip, this chip was written for my spec but would be perfect to get a new project running All you need to add to the above to get running is injectors and a throttle body!! £400 for everything above ALL THE ABOVE IS SOLD! Still have, -Also have 2 sets of rado G60 injectors if anyone's stuck for a set. £50 posted a set -And an 034 motorsport adj fpr, 3.3bar-5bar, fits 20vt fuel rails. £40posted

May not be needed for my G60 project so up for sale! I'll get pics up tomorrow and part number. Sprayed black(not by me) Few storage marks on paint and few dented fins (i'll have detailed pics tomorrow) Perfect for a mk2 G60, 20vt conversion and lovely upgrade on a corrado!! Price is £300 Located in Co. Cork, Ireland ---------- Post added at 10:02 AM ---------- Previous post was at 9:36 AM ---------- Part number, 191 145 805 H 2 marks on the front (1cent coin for reference), Rear, Most of these marks turn out to be paper/cardboard,

Sorted thanks to Owen!

Pm on the way!

Thanks Owen!