robrado974

Thanks mystic . I do have the up rated loom , I will do some checking . Sent from my iPhone using Tapatalk

I just want to check with you chaps that H4 472’s are the correct bulbs to fit . A mate put these in for me last week as I damaged my thumb badly with a Stanley knife. I went karting yesterday and drove back in the dark , I put the full beam on and found out I don’t have it [emoji52][emoji848]. It wasn’t a pleasant drive home . Sent from my iPhone using Tapatalk

[emoji4][emoji106][emoji106] Sent from my iPhone using Tapatalk

That’s what I’m saying Jon , the drain holes are doing their job . Sent from my iPhone using Tapatalk

You will have water in this spot , because of the drain holes in the bottom of the door . The seal is not designed to be water tight that would be impossible against a window that moves . Hope this helps . Sent from my iPhone using Tapatalk

Evening ladies and Gents. Does anyone on here know of someone who makes bespoke jewellery?. I lost my dad a few years back , he was never one for rings or anything I could keep to remember him by . A few weeks back my mum was going through some stuff and gave me his birth certificate. This got me thinking, could I get this made into a pendant ?, but a man type pendant nothing fancy, just a tubular type shape or whatever the certificate could fit into . It would have to be sealed so it’s waterproof. Any ideas please ?. Kind regards Rob

I looked on halfrauds site and they were £21.00 each . I went to pick them up , but they didn’t have them in store [emoji849]. The problem I had was , I’m working miles away atm and I can’t fit them when I get home , I’ve got a mates birthday weekend on Saturday , I’m driving to the carting in the evening and although I’ve got an uprated head light loom the original bulbs were still like candles. I bought the Halfords 150% brighter bulbs in the end . A mate works a Kwikfit so he put them in for me . I sliced my thumb from tip to the palm on Saturday morning at work with a box cutter , it keeps weeping so I asked him to put them in for me , which saved me from struggling. He put one in and left the other to compare the difference, it’s a lot brighter . At least I can see where I’m going properly now . Sent from my iPhone using Tapatalk

[emoji106][emoji106] Sent from my iPhone using Tapatalk

Thank you swift [emoji106]. I presume Ebay is the best place to get them ?. Sent from my iPhone using Tapatalk

Sorry if it seems a stupid question but these are ok to fit along side an up rated loom I presume?. I know you can’t fit HID’s because of the reflector . Am I right in thinking that these are what most people use ?. Kind regards Rob Sent from my iPhone using Tapatalk

Looking very nice . Our number plates are very close together. Sent from my iPhone using Tapatalk

Welcome along . Enjoy your purchase. As mark says , get the rust sorted above all else.

Just to be sure this strip is for the left side as in when you are standing looking at the front of the car . Passenger side . Kind regards Rob Sent from my iPhone using Tapatalk

yes i still have this for sale .

Yep, probably best [emoji106] Sent from my iPhone using Tapatalk

So the plastic sender part is gone and the thread is in the housing?. Maybe a dremmel could work ?, just to form a groove so you can use a driver to get it out . Sent from my iPhone using Tapatalk

Don’t you just hate it , when things break like that , not one but two parts . Could be worse , it could have been a thread in the block . Sent from my iPhone using Tapatalk

I have a set of headlight surrounds . I will take a look at the condition. Sent from my iPhone using Tapatalk

This is what I need to sort out . Thanks for all your advice chaps, much appreciated [emoji106] Sent from my iPhone using Tapatalk

[emoji4][emoji106][emoji106] Sent from my iPhone using Tapatalk

Classic green ?L reg VR6 in kingsbridge next to jewsons , any one on here ?. Sent from my iPhone using Tapatalk

I’m going to send mine away bud . It’s not cheap , but I will get it back in show room condition and it will last years . I think the problem with these products is they are water based . Ok so we’ve come along way with water bourne products, but oil based will always be king in my book . Sent from my iPhone using Tapatalk

Hope it lasts longer than mine did . Mine peeled where you hold the wheel , I did it by the book too . Sent from my iPhone using Tapatalk

I received my parts on Saturday. Thank you graham [emoji106][emoji106] Sent from my iPhone using Tapatalk

Nice one , thank you [emoji106] Sent from my iPhone using Tapatalk