![](http://the-corrado.net/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
swampy
-
Content Count
324 -
Joined
Posts posted by swampy
-
-
corrado vr6 fronts
vr6 rears
-
Can Also do fronts to. Suit the mk4 calipers
Just ask
-
And could nice new bolts with it
I can supply either stainless steel or bright zinc plate ones
-
I bet that £450 is his excess on the policy!!!
The hire company will charge him it for the repair and then not bother doing the work!!!
See it happening all the time !!!
Ex hire cars are the Bain if my life at work
-
They do have two on each rear yes, these are just the rear most set to be used if converting to the mk4 rear set up
I can do a four line set of rears or six line set with front hoses aswell but of course that alters the price
-
One piece??
-
Ending soon
Also now have sets to suit the mk1 golf to mk4 rear conversion
-
Yes both payments recived and lines orderd
Thanks
-
There used to be a company based just outside Manchester called FROST AUTOMOTIVE they did a kit for this at a reasonable price
Not sure if they are still going, they also did anodising kits etc aswell
-
Payment sent,Thanks, Jamie
can you pm me your address chap.
it comes out strange on the paypal and i dont want them to not arrive
-
Ends are back in stock
So can make these when youvwant
-
Ok mate i shall await your response........ ;)Ends are now back in stock!!!
-
The correct ends are now in for the custom lines!!!
So I can get them made up from now
-
its for the normal corrado g60 glader!there is no threads on it as it is secured by banjo bolts.But what thread do the banjo bolts have on them??
Also what's the dimension of the hole that the oil passes through
-
-
I posted this to your response in my thread in the wanted section, i was after a set of two for the fronts only. They are the banjo type fitting for the mk3 golf vr6 288mm calipers, just the front two required, can you give me a price please ?Just need to confirm if the company that supplies me has any banjo ends left to make them up with, if they have you will be looking at £27.50 the pair deliverd
Can do any number of rears to suit the mk4 conversion as they have a box of ends attached to hoses long enough to make rears but not fronts
-
for which end of the car??
i can supply them and have supplied several sets to forum users
---------- Post added at 8:59 PM ---------- Previous post was at 7:19 PM ----------
Sorry re read that you want fronts??
I should be able to supply them , but know the company that make them for me are running low ends!
-
Can you do just the fronts for a '94 VR6 with clear cover?hi mate yes, i can do them for £28.50 the pair delivered
---------- Post added at 8:01 PM ---------- Previous post was at 7:59 PM ----------
Can you give me a price please for VR6 standard rears? Got braided on the front (312's), would be good to sort the back,Thanks, j
yes mate can do you a pair for £26.50 delivered
the paypal is
cand i can get them made up tuesday
-
still available
if you want them with out the bolts i can do them for £28 including new washers as if you have the bolts in second hand calipers you will need the washers replacing
-
does it have a restrictor in it?
if not if you can get the thrread types and length of hose i can get it made
cheers
-
I bought a pair of these last week and found that the banjo bolt that goes into the Mk4 caliper was too long, so I used a hacksaw to cut it down about 7mm. Good quality item though!hmm thanks for that, i shall look in to it and get some shorter bolts
---------- Post added at 3:38 PM ---------- Previous post was at 3:36 PM ----------
Any forum discount through best offer?can do them for forum members for £30, would prefer to do that via the forum to save on ebay fees etc
do you do all the hoses? so if replacing front calipers also?yes mate i can do all the lines, see my full advert in the suppliers area
-
http://www.ebay.co.uk/itm/330717884408?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
think a few of you are watching these and one person from here has purchased them
please look at my other items and just ask if you want me to develop somthing for the car
-
i can custom make you a set of lines for the conversion, would need you too mesaure the length of the metal pipe and the flexi.
its not a avery common thing to do lines this way but its not un heard of, peugeot do it on the v6 coupe fitted with brembo brakes, they use a metal pipe to go from the caliper of around 13cm length and then go on to a flexi (i also make and supply these for the owners forum)
-
Anyone went and got prices lately from a dealer in the UK, just being to my local here in Ireland and got the following quotes..Part Description Qty Part no. Unit Price
Goodridge Mk 2-Mk 4 Rear Caliper 1 SVW0506-2P
€65.00
can get them mush cheaper than that!!
http://www.ebay.co.uk/itm/330717884408?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
also if any one can tell me the length and unions on the metal pipes i can get those mase up aswell
Braided brake lines
in Suppliers Forum
Posted
Will be with you ins couple of days!!
First lot failed qc at the suppliers due to the wrong banjo end being fitted!!!
Normal bloke that makes them up was off so his Assistant made them incorrectly, luckily they didn't get sent out and the normal guy picked up on them and has re done them!!
Sorry for thecdelay