swampy
-
Content Count
324 -
Joined
Posts posted by swampy
-
-
Bvhvf
-
Did you try putting a few drops of oil down the effected bores?
Would then show if it was rings.
-
The hoses I supply are of an equal to if not better than quality and are cheaper
-
Plenty of both of these
-
Think I have everything now, went with EBC Greenstuff pads for some added bite. Will let you know how it all shapes up :)Some better pads??
-
Ill be after some subtle smoke once im allowed to spend money on the car again
-
Only ever seen one in the boro and that's a red one on oundel road just down from the traffic lights
-
Why has it popped out??
They are designed to do that if the water freezes rather than crack the block
-
That is a bargain!!!
Infact these are my favourite pad on the market!!!
-
Why buy good ridge lines when I can supplier better and cheaper ones??
See suppliers forum
-
I have 288, brembo disc and greenstuff pads on front and they are CRAP !!!!!! well, they are braking much better than standard oem 280mm setup but still not enough for me.---------- Post added at 12:27 PM ---------- Previous post was at 12:23 PM ----------
I got that for sale
http://the-corrado.net/showthread.php?78388-New-4pot-Light-brakes
I believe you need 16" to fit them, calipers are light and small but didn't tried them under speedlines, 99,9% they won't fit.
That will be the pads!!
Green stuff are BEst used as paperweights!!!
-
Have a few pairs of the 10.9
And some of the 12.9 all ready to go
-
sure you can get a satin effect vht paint
scroll down thru the options and they do a few silver finishes, bet you could find it cheaper / easier at a local large garden centre.
paint it and fit a set of my new bolts (see suppliers forum) and jobs a good un
-
hi ian
i have sent another set out.
all other orders are now posted
-
i love harewood as a venue.
only ever being to hillclimbs there though.
are they static shows?
-
Sorry mate i should have made it clearer i didn't mean you mate i apologise for the confusion but who sold me them know's who he is. You are obviously a decent chap as you are sorting out a genuine error some people on here won't admit when they are wrong :thumbleft:Think you should learn to control your fingers and watch what you say!!!
As the man from pirtek pointed out and what I said in the first place all that was needed was the olive and union reseating!!
Not hard or difficult to do!!
Now keep your derogatory and potentially slanderous comments to your self
Both on this thread and any others
-
hi they run from fuel filter to accuator there not that long,they screw to the fuel filter .someone else mite have more of an ideaTime to find some one braking one and see if they will donate it to the cause!!
Or some good pictures so I can an idea of what's required
-
where do they run?
any one idea what ends are on them?
i e do them clamp on or are they threaded ends?
taking the pressure isnt a problem, the company that supply my braided brake lines also do fuel hoses including sampling rigs to FIA spec so im sure they can manage some normal fuel lines.
-
As in hex head??
Or mild steel??
-
Dip stick bolt : 6x16 cap bolt -1
Fuel rail to inlet : 6x12 hex head bolt -4 £2.50 (bolts for fuel rail and dipstick)
Upper timing cover: 6x65 cap bolt -8
8x30 cap bolt -2
6x10 hex head bolt -5
£8 for all above
Lower cover: 6x55 hex head bolt -2
6x16 hex head bolt -16
£5
Coil pack : 6x70 cap bolt -4 £3.50
Slave cyl : 8x30 hex head bolt -2 £1
THOUGH ALL BOLTS WOULD HAVE A SOCKET CAP HEAD SO ALL WILL MATCH WHAT I ALREADY SUPPLY
all bolts would be stainless steel and come with washers
cheers
-
im not familiar with the pipes in question, but i can supply braided fuel line if they could be replicated in that
-
Bolts collected today from the scrappy..Ill put them in zip lock bags and list the quantity needed and what they are for and you can add them to your sales list..
Ill be able to think of others as well should you wish to expand your empire...
Spot on
You got my address??
Ill expand my lines to as many items as you guys want!!!
-
Im planning on going to my local scrappy where there is a Corrado and ill get a little collection together of bits that would be good if stainless were available..So long as the car has what i need and what i think would be beneficial to others ill send them to you...
That's spot on, let me have the bolts you want, the area of the car they are from and the qtys etc and we can sort it
I can't make the brackets though unfortunately
-
Hi
If you can tell me the sizes, lengthes and qtys them yep I can almost certainly supply items that will be more than up to the job
Braided brake lines
in Suppliers Forum
Posted
Still doing these