Jump to content

hipcity

Members
  • Content Count

    62
  • Joined

  • Last visited

Everything posted by hipcity

  1. Sounds like a good idea. Anyone got a link to where to buy new insulation
  2. Hi would you have a picture of it without pls Many thanks
  3. I'm interested in finding out if anyone has removed the rubber trim attached to the doors etc "external" Does it look better removed? How do you remove it :) Thanks
  4. I was removing the carpet from a 93 2.0 16v Corrado and wanted to know what the big black bolt is under the accelerator pedal? As it is holding down the carpet etc... also - whats the best way to clean it up?
  5. Many Thanks - look forward to hearing back
  6. Hi - would anyone have one of these that is in good working order please Would need it shipped to Belfast Thanks
  7. Will give that a go Thanks. From Belfast
  8. Hi - its the same when using the dash switch. The manual winder works fine - does not stick at all when using it
  9. Im having trouble with the rear spoiler motor. After rebuilding the thing 5 times - its still not working It sticks when going up or down - i.e. it moves in stages. I stripped the unit down completely, cleaned everything and re-greased using lithium grease. Even all the carbon dust from the motor and both pipes that the mechanism move along, but the sticking is still there? Any ideas - could it be the rely?????
  10. Hi, Im having trouble with the rear spoiler motor. It sticks when going up or down - i.e. it moves in stages. I stripped the unit down completely, cleaned everything and re-greased using lithium grease. Even all the carbon dust from the motor and both pipes that the mechanism move along, but the sticking is still there? Any ideas - could it be the rely????? :shrug:
  11. Hi sent u my addy, let me know the condition of the wings pls
  12. hipcity

    corrado Rad Fan

    Hi I'm looking for an engine radiator fan plus motor. For a corrado 2l 16v 1993 Thanks
  13. Hi - Can you let me know whats still available - thanks
  14. Hi All I need to replace both the front wings on the Corrado - 93 Model 2.0 16v Looking for somethnig with no rust etc If you are willing to ship - please let me know how much it would cost to post to Belfast Thanks in advance
  15. I actually got round to taking the spoiler motor out today, was not too bad – the screws under the spoiler were a little tight, but did not break - (To loosen then i turned the clockwise just ever so slightly before trying anti clock wise). The two tubes are very tight – so going to give them a good clear tomorrow and try and put it all together again :-)
  16. No does not look to be, is fine when on the higher speed cooling the engine
  17. Hi I noticed a clicking noise coming from the engine bay. Turns out the fan that sits on top of the Radiator clicking when it spins on the slower speed It seem fine when its going at the higher speed and cools down the engine. Its mainly annoying than anything else - as when the car id turned off - all you hear is the fan clicking Any ideas on what it is or how to fix
  18. oil looks to be seeping through the seal
  19. How long did it take you to get all of the glue off. I've used the Tardis, but it still left some of the glue on there
  20. Going to give this a go next weekend, will let you know how it goes
  21. Just thought i would share these pics, the day before the MOT - The Speaker pops out and look what I found Rem to look after and protect under the car.... ;-)
  22. hipcity

    Spoiler sticking!!

    Mine is also playing up - will try the advice in this thread and let you know if it works Cheers
×
×
  • Create New...