Benjevw
-
Content Count
845 -
Joined
Everything posted by Benjevw
-
Iirc,the last time I looked, it's 2 small connectors. Its just I'm at work and wanted to get 1 ordered. I'll check wen I'm home. Cheers
-
Any1 know which cable is correct for a 93' Vr? I've had a look on eBay but there's so many. Any links to the right 1? Cheers Ben
-
Sweet! :) always a good day out. Hope the weather gets better tho ! 15 quid btw http://http://www.vwaction.com/gtispring/ Ben
-
Removed the new lump from my golf today:) Two words: fookin heavy! Couldn't get a crane at short notice so pretty much rolled it out the boot onto a ladder then slid it down onto a trolley thing ! Easy as that.... Only wrecking the dipstick :(
-
We didnt do that so its worth a try! It's just my dad was certain it was the servo. Sounds like its pi$$ing air when I brake!
-
Hi Anne, yea I did them in order from nsr,osr,nsf,osf. I had both rear calipers off, there was a bit of air in them today but thort we'd got it all out! Dont know if it's worth mentioning but the brakes did feel a lot better today compared to after bleeding them the first time. Was reading about adjusting the servo from inside the car for play in the pedal after upgrading brakes, it's got 312s on the front so this may be something to look at. Cheers Ben
-
I was looking for these a while ago, never got an answer of where to get any so got some off a 2.0 16v and they fit. Also got the top brackets off 'daves16v'. Look great :)
-
Recieved the mats today .:) Thanx a lot James Ben
-
Ah rite, I've bled them twice now(once manually and once on the easibleed), and put quite a bit of fluid through so I thort it would be enough! I'll try again tomorrow night tho. Hope i get it sorted too man cheers Matt
-
Hi guys, I bled the brakes today using the easibleed. Took it for a test up the road and can hear a hissing when I press the brake pedal! My dad said its the servo/master cylinder. I didn't bleed the master cylinder when I did the brakes, would this cure the hiss? Or is it a case of a new servo? Hope some peeps can help Cheers Ben
-
Ah I see. I'll plug it back in later on. Cheers lads
-
I haven't fitted the new loom yet , its just original stuff. Yea all lights work properly. Does it just dip the main beam then? Cheers
-
Yea same over here. I've sorted most of the problems out now just need to get it in for an mot. Hopefully no suprises! Lol Is it aqua blue? Got any more pics? Ben
-
Yea it did have an upgraded loom on it when I got it but I removed it because it was a right mess. I've got another uprated loom now. Do you not need it connected then? Cheers guys. Not to good wiv leccys.
-
Congrats dude. Looks lovely . I got my first corrado vr about 6 months ago and effin love it. Hope it all goes well for ya Ben
-
Cheers Sean ill have a look when I'm home
-
Just a quick update as haven't done much recently :/ Fitted the bmc along with a fresh new sticker( most important part) lol. Picked up the new engine last night too! Looks alright, deffo worth the 60 notes I paid for it. Would've liked it to have been ready for santapod next week but as I've done f all I'll be in the golf agen :(
-
Hi guys. I can't find a home for this plug thing. Any1 know where it goes? Cheers ben
-
Mornin all. Any1 goin santapod next Sunday ? Be good to meet some of ya.
-
No probs . Just making sure Nice 1
-
Did you receive this mate? Cheers ben
-
PM'd
-
Sweet! I'll take them off ya hands pal. How much posted? Cheers
-
Hey man do the mats say corrado on? What's the cond of the other mats? Cheers Ben
-
Looks freakin sweet duude!!