greegs

Hi will the above wheels fit on my corrado vr6 ? Been offered a set of 4 for £150 with good tyres. Was actually looking for a set of 15" steel wheels and tyres so I can take my TT rims off over the winter, but came across these and think they are a bargain if they fit ! Not to sure what the offset is but I am assuming the pcd is 5 x 100 ? Any help appreciated.

Ok thanks

Hi, does anyone know if a 2001 TT steering wheel would fit a 93 corrado ?

what about a set of these wheels 17s ? no rubbing problems and car is lowered

https://www.rac.co.uk/myrac/vehicle_data_check/

Have you tried Elephant or Bell Direct? They both offer online quotes. Also try http://www.confused.com :)

Do a search on laserline. Should point you in right direction :)

Just fitted mine tonight, not very impressed, pain to fit and sounds pants. I wouldn't bother if I was you mate. I'm going back to standard airbox and K+N panel filter with plastic bung removed from front of airbox, sounds much better.

Damage really just on one side and quite small. Probably over reacted but don't want any stray bits of metal flying into engine. corradovr6sc think I'll see how car runs without damaged wire mesh. pablovr6 i'll keep you in mind for your old MAF if I have any running probs. cheers guys

how much? take it mesh discs are intact?

Yeah the filter goes on one end but there is a wire disc at each end of MAF. But one is a bit worse for wear.

Hi, does anyone know if dealers sell the wire mesh discs that fit at each end of MAF as I have just had a wee accident trying to fit induction kit ?

And me, sent you PM a few weeks ago.

Is this carbonio filter the same as a turn2 kit? i.e carbon canister removed and cone filter put in hole with carbon intake attached? Hard to tell from picture.

toyo proxes t1-s 8)

Quick question about the carbonio kev. Does the filter sit where the carbon canister should be? The same as the turd 2 kit? Yeah Tom $279 is a lot of cash :mad:

Yes we do VR6. Cheers Kev that Carbonio intake actually looks better than the turn2 one. Didn't even know it existed !

Hi. Ordered a turn2 cold air induction kit for my vr6 on 26th of July and have still not received anything :mad: Unable to get in touch with this Jim guy at all. Have tried phoning-rings out, sent about 20 odd emails-no reply's, placed about a dozen posts on his turn2 forum-had 1 reply on 19th of August "You're order has been shipped. I will locate the tracking number and email it to you. Jim. STILL WAITING ON EMAIL! Turns out I'm not the only one in this position there is about 6 of us. Just wondering if anyone can get in touch with this pr*ck to tell me what's going on. My order number is 2889. yellowsic I have sent you a few PM's as you say he is a close friend of yours. He has till tomorrow to sort this out. If not sorted then cancelling credit card transaction. I really hope nobody else has ordered something from turn2 recently cos you have a very very long wait.......

Thanks mate. Do you think you could ask him to email me to let me know what is happening and when I am going to expect a delivery please.

Yep I'm with johnboy98 here. It's not on, I've been waiting since end of July for my CAI. Has he closed his shop down for the past month or something while he traces these parcels? Cos i've phoned him loads of times over the past few weeks and never once had an answer. I sent you PM on sat yellowsic with my order details for you to pass on to Jim. :mad: :mad: :mad:

Thanks yellowsic. Still have not received filter, have tried phoning turn 2 about 20 times but never had an answer. Emailed about 2 dozen times and had one reply saying that he will email me tracking number. That was over a week ago still not heard anything. I ordered filter back in July and I am not the only one who is waiting. :mad: :mad: :mad: I would appreciate it if you could get in touch with Jim as I along with quite a few others are getting very concerned about what is happening here. Or not happening.... Thanks again

I had the same problem a few months ago, couldn't get black plastic part off and ended up cracking it too. I had to drill a hole in black plastic and using a big flat blade screwdriver and hammer to hit it with it eventually started to turn but was very tight. I got a replacement black plastic housing from vw, cost me £19. Dealer said I was lucky to get part , they told me there was only a few left in the country. Good Luck!!!!!

not sure mate not really noticed until now!

Worth spending the cash and getting it done properly. I got mine sprayed profesionally for about £25. Well chuffed with result. Here's a pic ;

Fair enough it's a small business VR6 but I'm a paying customer, a 3 week holiday? They took the money from me quick enough. Just sent them a snotty e-mail. Will wait and see if they even reply this time.