dazzyvr6
-
Content Count
3,426 -
Joined
Everything posted by dazzyvr6
-
i think it just pulls out,at least it does on mine,unless its broke already :? :lol:
-
have you tried looking in maplins?
-
is it pulling to the right all the time or just when braking?
-
ive got magnecor leads on mine and the ends look exactly like oe ones
-
sounds ok,not a bad price either :)
-
some people just dont care,the amount of times ive nearly had my front end taken off by someone changing lanes with out looking in there mirrors..and i must add the corrado has got one bad door mirror blind spot :shock:
-
Not Starting..maybe relay? No its the immobiliser
dazzyvr6 replied to belfastfumanchu's topic in Archive
try taking the thinner wire block of your starter motor and use a piece of wire to bypass all the cars wiring,get a piece of wire and touch it on the terminal on the starter motor and the other end on the + side of the battery -
the meguirs would be better than the zymol cleaner wax,but wouldnt touch the top of the range zymol or swissol waxes
-
i would imagine the difference in oil and water times would be very little,and remember the water is held back by the thermostat for a while so it would heat up slightly quicker
-
nice pics..im really going to have to get down to a no rice meet one day
-
its hard to tell on the mfa because the oil temp doesnt start reading till it hit 50 degrees i think(or there abouts)
-
at first i thought it was the cables that had stretched because the handbrake was non existant,and was always creaking and when i pulled it on the plastic h/brake surround nearly came up it,when i went to adjust the cables i noticed the bracket on the floor had split,so i put a bolt and big washer in the bracket and tapped the bracket dack down onto place,ideally it needed welding but didnt have time,and its been like that for over 12 months now
-
yes mate...that would be mine :)
-
handbrake coming out of the floor...sounds very familiar,the exact same happend to mine :oops:
-
ive got an ipaq sat nav (tomtom),mine needs updating somehow really...
-
where in wrexham are you mate...not seen many around
-
its what aftermarket steering wheels sit on,the wheel and boss are seperate items
-
the plastic cover should just pull off,but be gentle..make sure you get the correct boss for your car
-
nice one...
-
im from wrexham so im not to far from you :)
-
im shite at reading electrical wiring diagrams,can anyone do and simple diagrams :lol:
-
now that im back on standard filter i can hear my magnex,and it sounds nice..now i can hear it
-
yeah,a wiring diagram would be usefull,looked at the one on bently but couldnt understand it to good
-
ill be doing mine soon so ill try and do a write up after i do it,but you do really need the vw wiring harness
-
phatvr6 has gone from 4 to 5 stud on his corrado i think :?