annavr6

I get an early and late type in ETKA early up to chassis >>50-M-027000 which is part 857-615-125 and late which is 50-M-027001>> onwards, part number 357-615-125/C which recently went NLA early ones show available via classic parts

Hi All If i could ask the question as ive come to a halt on finding the answer. ETKA list an early and late side trim for Corrado, 89-91 and 91-95. Different part numbers. Does anyone know what the difference actually is

Hi, Thank you again for your help and write up. Its spot on for what we need here. I can ask them to raise the raised section a little bit more if you think it needs it. Although i cant say ive known one to wear out previously

Sorted, will ship it now for you. I think the post has gone for today so will be tomorrow that they collect, Should be with you weds/thurs

If no one wants to fight it out with you i am happy to send this to you. I send you the bottom hose version did i not? That one is being re done at the moment.

Hi All Got a new part i have had re produced here at VW Heritage. Got a nice Top hose for G60 engines without air con. Would anyone like to test fit it for me? It is part number 535-121-101/B

Yup, just drop me your postcode over via pm/email

Yes, drop me an e mail anna@vwheritage.com and i will sort it out

Ive still got a few pre orders on for people. If anyone else wants to put a pre order on then give us a shout

Update, There are ready to ship now. I reckon by the time it happens and paperwork is done, they get booked in here, we are looking at 6 -8 weeks in total

He is just starting to put the VR6 sample together to test, then we will look to go into production. They will now be made from alloy to try and keep costs down for all

It may be completely wrong (un modifiable) but you dont get a good image on ETKA of what it really looks like. T4 also has rear disc of 280mm, they rear back plates list for 300 and 350mm T5s also have a rear disc of 294mm so that might be useable New Golf R looks like 310mm on the rear, another to look at

Was just wandering what you might use for 280mm rears, a bit of a hunt through ETKA tells me Phaetons had 280mm and bigger rear discs, I wander if you could adapt one from here to work for you. The really early ones show available still at 15.60 per side, the later ones are a little more money, probably too much considering you may need to modify to make them work

I did wander if you had the conversion as funnily enough myself and Julian were talking about this conversion yesterday. No nothing we will be doing will work for you im afraid as we are only doing OEM original parts currently.

Hi There was only ever one size available which fits all models including VR6 We are currently re making front shields for VR6 280mm discs.

Thats the beast

Hi, That would be great, this one is NLA so want to re produce it

This is the hose from the thermostat housing to auxillary pump. Looking for one so we at VW Heritage can re make it as its NLA

Hi, Could you get it done in the next couple of weeks :-)

Hi All We at Heritage decided to re manufacture a reproduction version. They are currently available genuine but as we all know eventually the supply will dry up and i wanted to get these done before that happened. These are for the rear with 226mm discs which i believe is all corrado models We have done mk1 and also corrado front VR6 ones recently that have been really good and we are now awaiting the stock Does anyone want to test fit these for me. In exchange for the usual photos and feedback you can also keep them https://www.vwheritage.com/191615611d-b ... 88-92-left https://www.vwheritage.com/191615612d-b ... 88-92-righ

Hi Thanks for doing this. This was copied from a Samco hose as i didnt have an original so i think we can say their hose could be a poor fit as this manufacturer is pretty good at getting an exact copy. The supplier can fit a sleeve, yes. I shall source an original and ship that off to them to make the changes. The sample hose, keep as a spare or bin it, its a first sample so has no use to us if its not quite right. Anyone that has a genuine version of this hose i could purchase please let me know

I will update when there is more progress, the chap is going away so waiting for him to get back

Hi, Drop me your details over and will ship this over to you. Must be not many people with G60s willing to take them apart as you are the only person up for helping

Hi Will see if anyone can do it a little quicker ideally, but if no one comes back to me in the next day or so then i would love to take you up on the offer

Hi All I have a G60 bottom radiator hose for models with no air con with PG engine code. Does anyone want to fit it up and test it? Will need some pictures/feedback back in exchange but you can keep it The sample i have is silicone but it will be manufactured in rubber when it goes into production Part number is 191-121-051/R