smee 0 Posted February 1, 2010 Yesterday, drove to Manchester and back without the ABS system throwing up a fault! This (hopefully) means the brake position sensor I bought off Leon has sorted the last of my ABS issues. :clap: Quote Share this post Link to post Share on other sites
Philmo 0 Posted February 1, 2010 Yesterday, drove to Manchester and back without the ABS system throwing up a fault! This (hopefully) means the brake position sensor I bought off Leon has sorted the last of my ABS issues. :clap: I haven't heard of a brake position sensor - where is it? [it doesn't read out "one at each corner" does it? :lol: ] Quote Share this post Link to post Share on other sites
shaung60 0 Posted February 1, 2010 I chaved me motor. Sold my Sebrings so fitted these lovely TSW 5 spokes as they have good tyres. 2.8l 24v Climatronic system.pdfTSW.JPG[/attachment:2lbnzgub] Then found my exhaust centre box had come apart at the weld so had to fit this bad boy system. Zorst.JPG[/attachment:2lbnzgub] Quote Share this post Link to post Share on other sites
Kempy 0 Posted February 1, 2010 I got TSW's :D Quote Share this post Link to post Share on other sites
shaung60 0 Posted February 2, 2010 I got TSW's :D Aaahhhh, yes I could see them suit a silver car :) Quote Share this post Link to post Share on other sites
Kempy 0 Posted February 2, 2010 not quite more red on my blue rado Quote Share this post Link to post Share on other sites
shaung60 0 Posted February 2, 2010 Think I'll shut up now :) Quote Share this post Link to post Share on other sites
Kempy 0 Posted February 2, 2010 Im ment to be fitting the tyres that the tsw's came on to so other wheels but havent tidied up the new wheels yet. But I did find time to paint these mars red :lol: Quote Share this post Link to post Share on other sites
smee 0 Posted February 3, 2010 I haven't heard of a brake position sensor - where is it? [it doesn't read out "one at each corner" does it? :lol: ] :lol: I'm not sure if that's what it's actually called, but it pokes into the brake servo and has a long plunger which presumably tells the ABS ecu how much braking force you're applying at the pedal? Quote Share this post Link to post Share on other sites
carrots 1 Posted February 3, 2010 i fitted a vr6 gear knob nice :D Quote Share this post Link to post Share on other sites
Philmo 0 Posted February 4, 2010 I haven't heard of a brake position sensor - where is it? [it doesn't read out "one at each corner" does it? :lol: ] :lol: I'm not sure if that's what it's actually called, but it pokes into the brake servo and has a long plunger which presumably tells the ABS ecu how much braking force you're applying at the pedal? Gotcha - I'll have a look at mine. Cheers Quote Share this post Link to post Share on other sites
Wullie 1 Posted February 4, 2010 Got the rear wheels powder coated to match the fronts and stop the seepage round the rims, no more slow puncture. Just need two Sebring centre caps to finish them off. Anyone?? Quote Share this post Link to post Share on other sites
bigrichi 0 Posted February 5, 2010 After nearly 2 years of ownership I discovered its got a rear wash wipe :nuts: Quote Share this post Link to post Share on other sites
Kempy 0 Posted February 5, 2010 I discovered today that you could manually put up the spoiler and it turned out thats what was broken. It wont work electronically unless the manual method is put back :clap: fixed Quote Share this post Link to post Share on other sites
carrots 1 Posted February 5, 2010 i took the power rohr i bought of ebay to a local welder to get another pipe welded to it Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted February 6, 2010 Fitted a home made automatic light sensor :D just need to tweak it at night Quote Share this post Link to post Share on other sites
Nik Patel 0 Posted February 6, 2010 Gave it a good wash, followed by clay barring, finished with Canarba Wax :tongue: Quote Share this post Link to post Share on other sites
PaulMoVR6 0 Posted February 6, 2010 Fitted my new oil temp sensor no more iratic oil temps now :D ,and gave it a good wash. Quote Share this post Link to post Share on other sites
dragon green 5 Posted February 6, 2010 Reconditioned and installed new front wiper linkage. Quote Share this post Link to post Share on other sites
carrots 1 Posted February 6, 2010 fitted a power rohr,not that impressed :( Quote Share this post Link to post Share on other sites
dragon green 5 Posted February 7, 2010 Replaced the window lifter bushes (the white wheels) on the drivers door, a big thanks to Dennis over on the Canadian forum, http://www.corrado-club.ca/forum/viewtopic.php?t=2890 Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted February 7, 2010 Cleaned the VW front badge and fitted my colour coded grill....shame about the stone chips on the bonnet and the broken fog light! :lol: RIMG0032.JPG[/attachment:1bkdkysu] Shiney though :D Quote Share this post Link to post Share on other sites
shaunVR6 0 Posted February 10, 2010 Havnt even been near my car for three months ,so today fin work a bit early and thought ill put the battery back on and see if it will start ...and low a behold turned it over and it started first time :clap: :clap: i love my rado even just starting it put a smile on my face :D Quote Share this post Link to post Share on other sites
James. 9 Posted February 10, 2010 Took my fogs indoors to keep warm while I cleaned them :) Took them back to the garage and dropped one. Smashing the lens in the process :censored: Quote Share this post Link to post Share on other sites
Kempy 0 Posted February 10, 2010 Took my fogs indoors to keep warm while I cleaned them :) Took them back to the garage and dropped one. Smashing the lens in the process :censored: that sucks, I hate when things like that happen :mad2: Quote Share this post Link to post Share on other sites
