millerman 0 Posted March 21, 2010 finished fitting an alpine ida x305 head unit with bluetooth hands free unit (just awaiting the imprint sound processor to arrive :D ) and started the leather cleaning process with the gliptone cleaner and cream and gotta say that stuff is very good drivers seat done and treated passenger seat just cleaned Quote Share this post Link to post Share on other sites
Kempy 0 Posted March 22, 2010 fitted some spacers in the rain :shrug: :cuckoo: Quote Share this post Link to post Share on other sites
delfinis38 1 Posted March 22, 2010 Cars been for an MOT and passed :clap: the guy commented it's only done 42 miles this last year. Bought and fitted 7 stainless steel self tappers to replace the rusted head light screws and and plastic tinware screws on the front valance bit ! looks all shiney now ! Quote Share this post Link to post Share on other sites
eddy.h 0 Posted March 27, 2010 the rear exhaust bracket on the body had broken of welded it back on fitted a lower strut brace wot a s**t fit had to make it fit engine gearbox mounting bracket had broken welded it back up Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted March 27, 2010 Fabricated a heatshield for my 4-branch from some exhaust heatshield. Really fiddly and lots of trial and error, but got there in the end :) Quote Share this post Link to post Share on other sites
Pat_McCrotch 0 Posted March 27, 2010 Cleaned the Corrado today; used 1001 on a few bits of the interior and found why I've had a knocking noise from the back for the last year. One of the foam bits that goes around the wheel had come unstuck from the floor. I always worried it was a mechanical problem. All sorted now :) Quote Share this post Link to post Share on other sites
smee 0 Posted March 27, 2010 Fitted my RH toplines, having got tyres on them yesterday...ET20/7J + VR6 plus axles = FAIL. Quote Share this post Link to post Share on other sites
Rob_G60 0 Posted March 28, 2010 Just cleaned the cupra R and the corrado and set about finding a boost leak that iv had for the past week, took the hole 2 minutes to do, happy days back at 14 psi now Quote Share this post Link to post Share on other sites
too hot 0 Posted March 28, 2010 Fitted re-charged battery and woo hoo started first time in 5 months :) Now got to get busy with it as its summertime will get a few extra hours of daylight :D Quote Share this post Link to post Share on other sites
delfinis38 1 Posted March 29, 2010 changed the clock to BST :D Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted March 29, 2010 changed the clock to BST :D :lol: ditto Quote Share this post Link to post Share on other sites
dbug 0 Posted April 2, 2010 Found a broken camshaft pully when swapping the timing belt. Thanks to Vince at Stealth got a replacement one on a bank holiday friday. Fitted and all back together. Ps thanks vw for the bottom pully set up - took an hour, 3 of us and the search function on here to find out it just pushes onto the crank! ! ! Quote Share this post Link to post Share on other sites
greasegriff 0 Posted April 2, 2010 Fitted my shiny new rear strutbrace from the groupbuy, and lovely it is too! Quote Share this post Link to post Share on other sites
RDH 0 Posted April 3, 2010 Spent hours trying to get the ******* srew out to replace the ignition switch,...........and :epicfail: Will try tomorrow if I have any screwdrivers left. Quote Share this post Link to post Share on other sites
chiller1 0 Posted April 3, 2010 I changed my left hand window regulater today, as it droped down yesterday driving in the rain!! I'm a techy by trade been in the game 10 years now and i have never come across such an b***ard to change!! Any how its all done now window goes up n down!! Does anyone else think the three rubber dampers that hold the motor to the door are a stupid idea as well??? Quote Share this post Link to post Share on other sites
4eyes2wheels 0 Posted April 3, 2010 Cleaned it, clay barred the bonnet and the roof, cleaned the engine bay a bit, reattached the drivers side little indicator which was loose and rattly. Also booked myself in for a visit to DG Autotech next week. Excited /nervous about that! :shock: Quote Share this post Link to post Share on other sites
lion 0 Posted April 3, 2010 took out dodgy xenons for standard ones. powerflex antiroll bar links in.....powerflex wishbone bushes wrong so car undrivable until tomorrow :epicfail: Quote Share this post Link to post Share on other sites
Swompy 0 Posted April 4, 2010 Gave the car a realy good clean today ( I still havent finished :ignore: ) and I started after the GP finished Cleaned the inside Pressure washed cleaned Dryed Clay bared Rinsed Dryed Polished Glos protection (waiting for it to dry not) Still got to Wax it and get some back to black on it :shock: My arms are feeling stiff, like I've been up to something :norty: Quote Share this post Link to post Share on other sites
ozowen 2 Posted April 4, 2010 Gave the car a quick clean ready for Coleford tomorrow. Only spent 3 hrs on her but she has come up well. Just need to do the wheels but watching the footy at the moment and touring cars being on ITV 4 hasn't helped matters :shrug: Quote Share this post Link to post Share on other sites
Swompy 0 Posted April 4, 2010 Gave the car a quick clean ready for Coleford tomorrow. Only spent 3 hrs on her but she has come up well. Just need to do the wheels but watching the footy at the moment and touring cars being on ITV 4 hasn't helped matters :shrug: I've just finished cleaning mine :clap: I recorded the touring cars so watching it now :D Quote Share this post Link to post Share on other sites
aide 0 Posted April 4, 2010 took the fuel filter off for changing, found the bracket was rusted and filter clip seized on, so dismantled it, wire brushed and applied rust eater ready for spray painting and underbody sealing with a new fuel filter tomorrow....... half hour job? :nono: Quote Share this post Link to post Share on other sites
lion 0 Posted April 4, 2010 new rear calipers on.... now need new rear discs and pads.... still no anti roll bar links...... :~( Quote Share this post Link to post Share on other sites
eugopnosaj 0 Posted April 4, 2010 yesterday took the passengers seat out to dry, today replaced both door membranes with some plastic sheeting (hopefully it will stay stuck in place), put the car back together and fixed the damn alternator whine coming from the sub! Quote Share this post Link to post Share on other sites
RDH 0 Posted April 5, 2010 Replaced the ignition switch, hammer, chisel and pipe pliers did the trick!! Quote Share this post Link to post Share on other sites
SIMONG 0 Posted April 5, 2010 put some floor mats in that i randomly found on a shelf in my house. Quote Share this post Link to post Share on other sites