VR6Pete 0 Posted July 28, 2012 [ATTACH]68627[/ATTACH] Genuine wishbones blasted to base and powder coated with uprated R32 rear bushes and genuine front bushes, all ready to fit as part of my subframe replacement project. Might as well do it properly :-) Quote Share this post Link to post Share on other sites
anne t 10 Posted August 5, 2012 tracking done after wheels fitted yesterday:thumbleft: ---------- Post added at 4:49 PM ---------- Previous post was at 4:30 PM ---------- Quote Share this post Link to post Share on other sites
Redfox 10 Posted August 5, 2012 Cleaned up edges and corners behind doorlocks, wheel arch edges, behind petrol flap, draincornersin front of doors edges, underside of doors etc. Then wnet looking at two Dino 246GT. Nice cars ;) Now I'd better go lube the spoiler preventative ;) Cheers, Redfox. Quote Share this post Link to post Share on other sites
Dude VR6 0 Posted August 6, 2012 Went to long life in Bicester to have an exhaust made/fitted this morning. Changed one of the heat shields whilst the exhaust was off. I'm well happy with the sound of the new exhaust, just a little bit louder than standard, but burbles, it's the dogs testicles I think. Quote Share this post Link to post Share on other sites
Swompy 0 Posted August 6, 2012 Video or this post is pointless :D Quote Share this post Link to post Share on other sites
Wullie 1 Posted August 7, 2012 Replaced a split outer CV boot. Was going to take pictures but managed to drop the wheel on top of the camera. It'll take more than superglue to fix it. Bu**er. I needed it for tonight. Quote Share this post Link to post Share on other sites
timthetinyhorse 0 Posted August 7, 2012 Dropped the red rado off at the garage for a few bits and bobs to be done, I usually do everything by myself but only have a week till mot time and I just don't have the time to sort it....... Benjevw random but my car is a brother of yours K100 VRG! Gave it a wash and wax yesterdy! Came out mega clean . Would def recommend Dodo Juice stuff. Quote Share this post Link to post Share on other sites
rado mc 0 Posted August 7, 2012 Sat in it and considered not breaking and buying another, but starting some dramatic rescue rebuild programme! Quote Share this post Link to post Share on other sites
captainredeye 0 Posted August 8, 2012 Replaced the exhaust hangers so no more knocking and while I was under the car found a few more jobs to do. Yay Quote Share this post Link to post Share on other sites
EJ Taylor 22 Posted August 8, 2012 new pads arrived new discs arrived so fitted them also at the same time did the cv boot and replaced the track rod end....... yo then pass the mot with NO (yes NOT ONE) fualts! oooo yeeeeeeeeeeeeer! Quote Share this post Link to post Share on other sites
moneypit23 0 Posted August 10, 2012 Finally fitted the Dave16v polished gear surround, had it for long, long time and i wish i'd done it sooner. Quote Share this post Link to post Share on other sites
timthetinyhorse 0 Posted August 10, 2012 Car failed MOT on horn and corroded brake lines :-( work and reset hopefully on Monday....... Quote Share this post Link to post Share on other sites
Dude VR6 0 Posted August 15, 2012 Stripped the interior out of the car, removed the headlining and removed my sunroof. I now have a fully working moon roof, night and day diffferance Quote Share this post Link to post Share on other sites
anne t 10 Posted August 15, 2012 just bought a set of vibra-technics engine mounts,will be collected tomorrow:cool: Quote Share this post Link to post Share on other sites
aide 0 Posted August 16, 2012 fitted a moonroof. Quote Share this post Link to post Share on other sites
Dude VR6 0 Posted August 16, 2012 Yet again, I have sorted yet another problem today out on the Corrado. My rear spoiler kept blowing fuses on the way down, I'd had a quick look at it but couldn't find any problems. So with yet more time on my hands(other half Pi**ed me off again) I took to the garage. Removed the rear spoiler completely, and stripped it down. What a mess, 18 years of use and no maintenance. Cleaned, re-greased and re built. Re-fitted to the car and checked operation on the switch, A BIG HAPPY GRIN, as It worked. Everything refitted, and a road test, just to make sure. I love time off work for Corrado maintenance :dance: I have taken a few photos, but am having trouble up loading them Quote Share this post Link to post Share on other sites
anne t 10 Posted August 17, 2012 My new mounts are here :cool: ---------- Post added at 11:34 PM ---------- : Quote Share this post Link to post Share on other sites
owen g60 10 Posted August 18, 2012 Ran it on the rollers today... 208.3 bhp not too bad, i feel there is a little more to be had before cams and head work etc start coming into play Quote Share this post Link to post Share on other sites
beastie4126 0 Posted August 18, 2012 Started on the rear brake refurb. New offside disc, bearing and mk4 caliper fitted before it got to darn hot and I retreated to the beer in the fridge :) Quote Share this post Link to post Share on other sites
Goldie 2 Posted August 18, 2012 I drove about 40 miles in mine, loving every minute then obviously gave it a wash as i have got the bug big style... Leather fed, some more purchases and getting ready to put it to be for the winter... Quote Share this post Link to post Share on other sites
rado mc 0 Posted August 23, 2012 (edited) Bought a second Corrado because my other, looked lonely and broken. My god, 3 spoke alloys.... Gonna need a bigger shed for this project. Will try to take pics of upcoming cannibalism adventure! Edited August 23, 2012 by rado mc Quote Share this post Link to post Share on other sites
Redfox 10 Posted August 23, 2012 That's the way to go Rado!!! Kudo's to you. Cheers, Redfox. Quote Share this post Link to post Share on other sites
dragon green 4 Posted August 24, 2012 Fixed my non-working heated drivers mirror ! A wire had came off ! Recrimped and now working Quote Share this post Link to post Share on other sites
Wullie 1 Posted August 24, 2012 Put it in for its MOT. Passed :dance: Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted August 25, 2012 Gave my new samcos a clean up prior fitting! [ATTACH]69113[/ATTACH] Quote Share this post Link to post Share on other sites
