StormchargedVR6 0 Posted August 30, 2009 Is yours running the GT30 stil?? GT30 works perfect for me :grin: Im only running 1 bar, it will be going up later :norty: Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 1, 2009 Latest upgrade Stage 2 shafts good for 475whp You've had the metal polish on those CVs haven't you? And you've painted the shafts black! You tart :lol: Rolling arches and slamming..... oh dear. And there I was thinking you were a sensible lad with good taste!! Only kidding. As ever mate, best corrado on the forum (imo) getting better each time :salute: Quote Share this post Link to post Share on other sites
Walesy 0 Posted September 1, 2009 I dont really see how you could get a better Corrado than this tbh! Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted September 1, 2009 Latest upgrade Stage 2 shafts good for 475whp You've had the metal polish on those CVs haven't you? And you've painted the shafts black! You tart :lol: Rolling arches and slamming..... oh dear. And there I was thinking you were a sensible lad with good taste!! Only kidding. As ever mate, best corrado on the forum (imo) getting better each time :salute: Kev you know me and polishing :cuckoo: Its off the road now, i've stripped the doors,bumpers off and almost giving it a respray :cuckoo: Had a few slight ripples from rolling the archs, so im just going to flatten them now :) Then get it in work, get some pics up soon I dont really see how you could get a better Corrado than this tbh! Cheers mate Quote Share this post Link to post Share on other sites
Goldie 2 Posted September 2, 2009 What rims have you got on it at the minute? Rolled arches now so must be sexy wheel time... Those drivehsafts are a bit nice mate... Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 2, 2009 Its off the road now, i've stripped the doors,bumpers off and almost giving it a respray :cuckoo: Good man! Good luck with the repaint mate, I bet it will look fantastic :salute: Quote Share this post Link to post Share on other sites
big ben 10 Posted September 2, 2009 i bet it will, i bet it will cost a small fortune as well knowing your high standards :D Quote Share this post Link to post Share on other sites
_leon_ 0 Posted September 2, 2009 he's not bad at painting apparently ;) Quote Share this post Link to post Share on other sites
coullstar 0 Posted September 2, 2009 Loving this car. Could you take some photo of the front fog intakes preferrably the back part. thanks. Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted September 2, 2009 What rims have you got on it at the minute? Rolled arches now so must be sexy wheel time... Those drivehsafts are a bit nice mate... Hey Michael , rims are BBS CHs 8.5x17 8) Had to roll the archs to get the rite stance, should be looking good for UDs next year :) Its off the road now, i've stripped the doors,bumpers off and almost giving it a respray :cuckoo: Good man! Good luck with the repaint mate, I bet it will look fantastic :salute: Will be lot better then the crap VW finish :lol: i bet it will, i bet it will cost a small fortune as well knowing your high standards :D Helps when you paint cars for a living mate :lol: , Loving this car. Could you take some photo of the front fog intakes preferrably the back part. thanks. Will do mate :) Quote Share this post Link to post Share on other sites
big ben 10 Posted September 2, 2009 :lol: does help i suppose, wish i could pait mine :( Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted September 6, 2009 Stripped ready to take to work, rolled the archs just need to beat them flat. Only painting the sides, may go over the bonnet for what its worth :) Shame to sand down really :cuckoo: but it will look much better,it will have lot more depth to the paint 2.8l 24v Climatronic system.pdfDSCN0667.JPG[/attachment:1ndf8qqs] DSCN0669.JPG[/attachment:1ndf8qqs] Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted September 6, 2009 looks like it just came from piant :lol: Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted September 6, 2009 Perfectionist lol!! Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted October 4, 2009 Got the car in work at last :? Been a flat out weekend getting it done but its all good :D Front archs are flat, rears are just rolled. Thought paint front panel same time, had few chips 8) Few pics of my handy work ETKA Corrado.pdfDSCN0673.JPG[/attachment:lt0ma4aq] stromlaufplan_gamma4.pdf01.JPG[/attachment:lt0ma4aq] Corrado92.pdf02.JPG[/attachment:lt0ma4aq] passat climatronic wiring diags.pdf03.JPG[/attachment:lt0ma4aq] climatronic wiring-Golf from May 01.pdf04.JPG[/attachment:lt0ma4aq] 06.JPG[/attachment:lt0ma4aq] 2.8l 24v Climatronic system.pdf05.JPG[/attachment:lt0ma4aq] Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted October 5, 2009 Good work sir :salute: Slightly dissapointed though. I thought you were going wide arch!!? :D Still got those RK2s then. Have they got good caliper clearance? :norty: Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted October 5, 2009 Good work sir :salute: Slightly dissapointed though. I thought you were going wide arch!!? :D Still got those RK2s then. Have they got good caliper clearance? :norty: Mate , don't like the wide arch thing Keeping the RKs, will be putting on R888 for when i do 1/4 mile 8) Quote Share this post Link to post Share on other sites
ozowen 2 Posted October 5, 2009 My god; I thought you had the nicest looking car anyway and what do you do. Go and make it better and better :clap: :clap: . Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted October 5, 2009 My god; I thought you had the nicest looking car anyway and what do you do. Go and make it better and better :clap: :clap: . Cheers mate , handy been a painter :lol: Quote Share this post Link to post Share on other sites
Goldie 2 Posted October 5, 2009 It is sickening Shaun, your car is MINT and that is a very missused term and then you go and paint it.. I dont think i like you anymore.. Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted October 5, 2009 It is sickening Shaun, your car is MINT and that is a very missused term and then you go and paint it.. I dont think i like you anymore.. Paint was getting bit thin mate , i can do lot more polishing now :lol: 8) Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted October 6, 2009 Mate , don't like the wide arch thing I think it looks excellent if done right :) Keeping the RKs, will be putting on R888 for when i do 1/4 mile 8) Good man. You've got the shafts and gearset for it, so why not! Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted October 7, 2009 Mate , don't like the wide arch thing I think it looks excellent if done right :) Keeping the RKs, will be putting on R888 for when i do 1/4 mile 8) Good man. You've got the shafts and gearset for it, so why not! Got few things to finish off and the bodywork is just how i want it 8) would like to see whats times it will do, may do the pod next year :) Quote Share this post Link to post Share on other sites
_leon_ 0 Posted October 7, 2009 with the gearbox and shafts/cv's strengthened - whats the next weakpoint? Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted October 7, 2009 For him, internals. He's still running stock pistons, but uprated rods IIRC. The ringlands on the standard pistons aren't known to be the strongest. Wossners, JEs etc all have ringlands twice as thick as stock for boosty goodness :D Quote Share this post Link to post Share on other sites