Kevin Bacon 5 Posted September 10, 2009 PMSL :lol: Defo a hole in the market there mate. Get working on one and you'll make a killing at next years E38 show :lol: Quote Share this post Link to post Share on other sites
big ben 10 Posted September 10, 2009 PMSL :lol: Defo a hole in the market there mate. Get working on one and you'll make a killing at next years E38 show :lol: :lol: i could even put a little chav peak it, and it can come with a anchor think chain for ya staffy :lol: Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 10, 2009 All this is making my head spin a bit to be honest,I am hopefully going to meet up with a guy who is doing a twin turbo vr6 at the mo,and has done a lot of other vrt's in the past to have a good old chat about all things holy(that being vrt's esp vrtt's :D :notworthy: ) So hopefully I will have a better understanding of what needs to be done and will get things underway. It will be done in 6 months tick tock it's on baby! There's a twin turbo VR6 4WD MK2 Golf in Suffolk that I know of. Not him is it? Also Strictlydubs are near Chelmsford. Have a word with Simon, he's a really nice bloke and imports all the Schimmel stuff, plus anything else you need. They do well priced turbo kits aswell! Quote Share this post Link to post Share on other sites
dom911 0 Posted September 10, 2009 It could well be,I know that he is mostly into golfs,so sounds about right will let you know after I have had a chat with him.Thanks for the for the info on were to get kit,I have just sold the bike,so will be getting things together soon. Do you have a number for simon? Quote Share this post Link to post Share on other sites
fla 9 Posted September 10, 2009 as there are almost 50 pages here, is it possible to distill this into a guide for supercharging and turbocharging, perhaps as a Wiki article? Quote Share this post Link to post Share on other sites
_leon_ 0 Posted September 10, 2009 ;) something in mind Hasan? Quote Share this post Link to post Share on other sites
VR6Joni 0 Posted September 10, 2009 Ok Im going to be a lazy fooker and ask if anyone has good experience with Rotrex chargers other than B5VWC. Contemplating one for my car but cannot find too much info on uk-mkivs and just scanned vwvortex however they seem more into the VF's. Im not looking at any internal work, would just to get around 300bhp mark with torque to boot. What do you want to know mate? Is this going on a 24V? Just looking at you sig. Quote Share this post Link to post Share on other sites
coullstar 0 Posted September 11, 2009 Ok Im going to be a lazy fooker and ask if anyone has good experience with Rotrex chargers other than B5VWC. Contemplating one for my car but cannot find too much info on uk-mkivs and just scanned vwvortex however they seem more into the VF's. Im not looking at any internal work, would just to get around 300bhp mark with torque to boot. What do you want to know mate? Is this going on a 24V? Just looking at you sig. Yeah just looking at it for the Corrado. If I get my road bike sold I might use some of the money towards this. From the research Ive done it would appear you use the belt tensioner already on the engine with the requirement to grind away some of the head. It would be nice to know what is required as a minumum to get this fitted although Im sure there will be difference between mine and the 12v. Ive seen a guy on UK-mkivs with one fitted running lower CR and forged internals with 400+bhp on his 4motion. That would be nice but Im not quite at that stage.....yet. Quote Share this post Link to post Share on other sites
fla 9 Posted September 11, 2009 ;) something in mind Hasan? ha ha you guessed it :D Turbo does look/sound very appealing, not totally convinced on a supercharger, but i'm only looking at around 300 horses, so its still driveable. Still not ruled out the 24v though.... Quote Share this post Link to post Share on other sites
big ben 10 Posted September 11, 2009 ;) something in mind Hasan? ha ha you guessed it :D Turbo does look/sound very appealing, not totally convinced on a supercharger, but i'm only looking at around 300 horses, so its still driveable. Still not ruled out the 24v though.... 400bhp is still driveable, you wont be driving on boost everywhere you go, well it would be impossible!! but 300bhp is enough for me (at the minute :wink:) Quote Share this post Link to post Share on other sites
KADVR6 0 Posted September 11, 2009 Ok Im going to be a lazy fooker and ask if anyone has good experience with Rotrex chargers other than B5VWC. Contemplating one for my car but cannot find too much info on uk-mkivs and just scanned vwvortex however they seem more into the VF's. Im not looking at any internal work, would just to get around 300bhp mark with torque to boot. DONT got to storm etc etc and buy the kit mate, theres a place called TTS near silverstone which will supply you the charger/cooler etc etc at a very good price, theres also a near new c30-94 on e-bay at the moment :) as for the mounting bracket, there was a place in holland called R-TECH?? who sold the brackets for the 24v engines, but i dont think there still around?? you could always get a knackered 24v engine and fabricate your own brackets and then make some more and sell them on?? oh yeh on the 24v engines you dont need to grind off any part of the engine. karl Quote Share this post Link to post Share on other sites
dom911 0 Posted September 11, 2009 Has anyone have a number for Stricklydubs can't find one anywhere! Quote Share this post Link to post Share on other sites
coullstar 0 Posted September 11, 2009 Ok Im going to be a lazy fooker and ask if anyone has good experience with Rotrex chargers other than B5VWC. Contemplating one for my car but cannot find too much info on uk-mkivs and just scanned vwvortex however they seem more into the VF's. Im not looking at any internal work, would just to get around 300bhp mark with torque to boot. DONT got to storm etc etc and buy the kit mate, theres a place called TTS near silverstone which will supply you the charger/cooler etc etc at a very good price, theres also a near new c30-94 on e-bay at the moment :) as for the mounting bracket, there was a place in holland called R-TECH?? who sold the brackets for the 24v engines, but i dont think there still around?? you could always get a knackered 24v engine and fabricate your own brackets and then make some more and sell them on?? oh yeh on the 24v engines you dont need to grind off any part of the engine. karl Thanks, TTS are well known for s/cing bike engines and have been for a few years. Quote Share this post Link to post Share on other sites
carpoid 0 Posted September 11, 2009 dom911 - here you go http://www.strictlydubs.com/ Quote Share this post Link to post Share on other sites
dom911 0 Posted September 11, 2009 dom911 - here you go http://www.strictlydubs.com/ I have been on there site already,it dosn't seem to work,there is no numbers on there,so just there number would be good. Quote Share this post Link to post Share on other sites
carpoid 0 Posted September 11, 2009 I just realised too :ignore: Can't seem to find it either, sorry about that mate. Quote Share this post Link to post Share on other sites
KADVR6 0 Posted September 11, 2009 how much for a 2.8 24v bracket :shock: http://www.ccr-racing.com/shop/vw-9c1.html Quote Share this post Link to post Share on other sites
coullstar 0 Posted September 11, 2009 I'll maybe put that on hold for then. :shock: Quote Share this post Link to post Share on other sites
StormchargedVR6 0 Posted September 11, 2009 Here we go guys, 3'' exhaust sytems ready made for the corrado 8) http://forums.vwvortex.com/zerothread?id=4544494 Quote Share this post Link to post Share on other sites
herisites 0 Posted September 11, 2009 how much for a 2.8 24v bracket :shock: http://www.ccr-racing.com/shop/vw-9c1.html Blimey, I forgot how much these brackets etc are. I should get my arse in gear and get shot of mine! Quote Share this post Link to post Share on other sites
VR6Joni 0 Posted September 12, 2009 Hope they are better than the storm ones as I've had quite a few issues with mine up to press, here's a little warning of what to expect: 1)Holes to screw to the head not quite correct, had to slot one slightly. 2)Slot for tensioner (pulley extender) in the wrong place, I had to open it up. 3)My 85mm charger pulley is on the very upper size limits and to my disgust can actually self destruct :shock: with the belt rubbing against the belt around the charger when it stretches slightly. Luckily with my vigilance I caught this and just managed to tweak everything with the play in the holes and re-tensioning the belt to be clear by a few mm. 4)Tensioner mounting plate not welded on straight therefore the tensioner pulley does not run true and now the pulley bearings sound shagged, I've bodged it with some shim. But all in all for the price of this bracket (which is fair enough due to development) they could at least NOT be making these errors in manufacture, made on the cheap if you ask me. :epicfail: I'm now very tempted to get mine drawn up with a few charger positioning tweaks and made correctly. Working in a drawing office, this should only take a little persuasion one lunch time or two as one of the guys used to work for Holset/Cummins so appreciates my efforts. Also useful as he knows all the equations to calculate the best turbo charger for the job, which is sounding more tempting by the week a lately. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 15, 2009 Has anyone have a number for Stricklydubs can't find one anywhere! Here you go mate - 01621 778811 Quote Share this post Link to post Share on other sites
Philmo 0 Posted September 15, 2009 ........... the best turbo charger for the job, which is sounding more tempting by the week a lately. Happened to be in Kidderminster - DGAutotech sorting my Bora ARB bushes and some ecu probs - and Crazydave offered a spin in his VRT on his fave local circuit - Sheesh! - use of spare pair of trollies narrowly averted. :notworthy: That car is so well planted, smooth and well behaved for a 350bhp 12V. Dave very kindly offered a spell behind the wheel - what a superb drive. :clap: Quote Share this post Link to post Share on other sites
dom911 0 Posted September 15, 2009 Has anyone have a number for Stricklydubs can't find one anywhere! Here you go mate - 01621 778811 Nice one thanks Quote Share this post Link to post Share on other sites
brokencorrado 0 Posted September 16, 2009 hello guys, I am new to the forum. I can tell you already this is probably where I will be hanging out the most. Quote Share this post Link to post Share on other sites
