Breaking 1993 Aqua Blue VR6 Corrado,Please Read 1st post for parts & prices! Ta :)

[rado-steve 0]

Hi Guys,

 

Between me and my mate we recently bought an L-Reg Corrado as a breaker, mainly to fit the VR into his MK2 Golf, as the car has had a fairly major drivers side impact! An argument with a Lampost in which the lampost won quite easily :(

 

There for there are no parts from the drivers door etc available, the impact crushed the transmission tunnel so the interior seats are junk :( Lots of parts salvagable though :) As the car is being used for a conversion there will be very little in the way of running gear up for grabs, but try us anyway. As the impact was quite serious we won't be selling the Rear beam or Subframe/Rack assembly as i really wouldn't want to see bits be put onto another car that could potentially cause a crash :)

 

So these are the parts that we have removed etc, if there is anything you can't see, bearing in mind the above, then please ask here, PM me or call us on: 07971623155 (steve) or 07976746708 (skez)

 

Have pics of nearly all parts, Items located in Middlesbrough/Stockton in the North East, can post most parts by courier at your request & cost, larger parts by collection only!

 

Interior Shizzle:

 

VR6 Clocks, showing 130K ish IIRC:£50 ono

Late Style Dash, good condition, Black: SOLD

Dash Centre inc Fag lighter, VGC: BROKEN :(

Lower dash Plastics, black, VGC: SOLD

Clock binnacle, vgc: SOLD

Ignition Cowl (Top & Bottom) x2, both in vgc: SOLD

Heater control panel inc cables and heater box: SOLD

Adjustable coloum adjuster knob: £10

Various dash switches, lamps etc ABS, Fogs, Rear demist etc: £5 each ABS Lamp SOLD

4 x Heater Vents: SOLD

Momo S/wheel (not sure what type), Tatty: £20

Momo steering wheel boss for later cars, vgc: £20

Gear Knob and plastic surround (surround OK, Knob tatty): £15

A,B & C pillar covers, in VGC, black: SOLD

Sunvisors, vgc but dirty: £10 pair

Sunroof trim panel: £5

Electric S/Roof motor: £25

Passenger Door card, bare: £5

Passenger & driver Door bins Inc uprated speaker: £25

Drivers door handle with mirror switches: SOLD

Passenger Grab Handle: £5

Boot Trim inc intact trim around boot striker (the flimsy bit): SOLD

Interior light with sunroof switch, grubby: £5

Rear parcel shelf brackets & speakers, grubby buy vgc: SOLD

Blower Fan unit: £25

Fuseboard: £15

Electric Window module: £15

Interior Mirror: £10

Wiper/Indicator Stalks: £15

Spolier Module: £10

 

Exterior Shizzle:

 

Aqua Blue Bonnet, Good Condition, no rust, but stone chipped: £100 ono

Aqua Blue Passenger Door, in good condition inc window motors: £45 ono

Aqua Blue Tailgate inc Glass & Spoiler: £20

Drivers Wing, vgc: £25

Pass. Wing, vgc: £25

Inner arches: £5

Fuel Flap, minor chip :(: £5

Aqua Blue CC late Grill, inc red VR6 badge: SOLD

Aqua Blue CC passenger door handle: £25

Passenger door mirror, vgc, glass not very corroded: £30

Passat Moonroof & runners, vgc: £50

Front Bumper: £35

Rear Bumper: £30

Rear Number plate Plinth: SOLD

Spolier Mech & Motor: £35

Wiper Mech & Motor: £30

Wiper trim: £30

Slam Panel: £20

Tailgate gas struts: £10

Std Rear Lights: SOLD

Front Headlamps (late), Drivers side, has 1 X Broken Tab: £30

Front Headlamps (late), Pass Side, Perfect: £35

Pair of late Front Fogs: SOLD

Front Indicator, drivers side, has chip: £5

Front Indicator, pass side, vgc: SOLD

Passenger Side door Glass: £30

Windscreen (you come and remove): SOLD

Passenger Rear 1/4 Glass (you come & remove): £25

Various bits of trim etc: £enquire

Beesting base: £5

Aqua Blue CC eyebrow: £5

 

Other parts:

 

VR6 Header Tank: £10

ABS ECU: £30

ABS Pump Unit: SOLD

VR6 in-tank fuel Pump: £30

Tailgate Solenoid: £5

 

 

Any other parts, please ask and I'll see if we have them :)

 

Cheers Y'all!

Edited October 20, 2011 by rado-steve

[owen g60 10]

Im after a complete passenger mechanism minus the motor... also the rollers for the driverside if they are there... I have both windows starting to not close all the way

[8vMatt 1]

I'll take the Dash Centre and Heater controls please bud.

 

---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------

 

Pass Wing also please.

Number plate plinth.

Front Fogs if undamaged.

Pass indicator

 

Let us know a total for everything please bud.

[rado-steve 0]

Im after a complete passenger mechanism minus the motor... also the rollers for the driverside if they are there... I have both windows starting to not close all the way

 

We'll have to drill out the mech, but you might aswell take the lot! £25 plus postage??? As the ad states the drivers side has a very large lampost mark in it lol, they had to cut the door off to get the chap out so none of it suvives I'm afraid :(

 

Let me Know Fella :)

 

---------- Post added at 10:14 PM ---------- Previous post was at 10:11 PM ----------

 

I'll take the Dash Centre and Heater controls please bud.

 

---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------

 

Pass Wing also please.

Number plate plinth.

Front Fogs if undamaged.

Pass indicator

 

Let us know a total for everything please bud.

 

Okey Dokey, Think the controls etc have gone already though...just waiting for somebody to get back to me, front fogs are undamaged! I'll post up a pic in a sec, Not really happy about posting fogs, but we'll wrap them as best we can! Ahh just seen you want the wing too, Are you wanting to collect dude???

Edited September 18, 2011 by rado-steve

[8vMatt 1]

I don't mind paying a bit extra for a big box to put stuff like fogs in. Lots of bubble wrap and scrunched newspaper have protected headlights I've posted in the past with no problems.

 

What condition are the rear lights please? Want to spray a set red, so need to be good.

Got a good condition Chrome Corrado badge for the rear?

[rado-steve 0]

I don't mind paying a bit extra for a big box to put stuff like fogs in. Lots of bubble wrap and scrunched newspaper have protected headlights I've posted in the past with no problems.

 

What condition are the rear lights please? Want to spray a set red, so need to be good.

Got a good condition Chrome Corrado badge for the rear?

 

Not sure on the rear lights as I didn't remove them, I'll as for you tomorrow! Chrome corrado badge long gone I'm afraid :(

 

Wing:

indicators:

fogs:

 

I see you're in Devon :( Not sure I can get a box big enough to put the wing in like!

[8vMatt 1]

Cool, thanks for the pics. I'll have everything stated. If you can find out about the controls that would be great. Ok, could we hang fire on the wing. Looks good though, I'll see if I can get one closer to home. If not, then maybe look at getting a flat screen TV box for the wing. That might work possibly?

 

Next up!

 

Drivers door handle inc mirror switch

ABS switch

Do you have the window switches please?

 

Once I find out about the rear lights, can we do a total for everything and then I guess you would need to get some sort of postage cost.

 

Cheers buddy.

[bristolbaron 11]

what colour is the moonroof inner panel?

[rado-steve 0]

what colour is the moonroof inner panel?

 

ummm, cream ish IIRC, matched the rado headlining ok

 

---------- Post added at 11:45 PM ---------- Previous post was at 11:41 PM ----------

 

Cool, thanks for the pics. I'll have everything stated. If you can find out about the controls that would be great. Ok, could we hang fire on the wing. Looks good though, I'll see if I can get one closer to home. If not, then maybe look at getting a flat screen TV box for the wing. That might work possibly?

 

Next up!

 

Drivers door handle inc mirror switch

ABS switch

Do you have the window switches please?

 

Once I find out about the rear lights, can we do a total for everything and then I guess you would need to get some sort of postage cost.

 

Cheers buddy.

 

ABS switch, you mean indicator lamp?? you can just see it in this pic....

door handle with mirror switches:

Don't have pics of the electric window switches but have the pair: £10 for both?

[8vMatt 1]

Yep, sorry the ABS lamp. Door handle looks good, mirror switch all working fine? Hard to test the drivers side!!! £10 for the window switches sounds fair as long as they work as they should. Add them to the growing list!

 

Thanks a lot mate.

[bristolbaron 11]

hmm.. it should either be beige or grey.. can you post a pic?

[P3rks 11]

If 8vMatt doesn't take the fogs can I be 2nd on the list please!?

 

I'll take the indicators at the same time if so.

[MarkFoster 0]

I'll take the headlamp loom if it includes for both left and right?

 

Mark

[8vMatt 1]

Could you give us a price to chuck in a full set of relays from the fusebox please? Supposing they all work that is!Sure I'll think of something else to get my parts bin fuller for the years to come! Cheers buddy.

[rado-steve 0]

I'll take the headlamp loom if it includes for both left and right?

 

Mark

 

It should do! I'll double check!

 

---------- Post added at 04:28 PM ---------- Previous post was at 04:26 PM ----------

 

Could you give us a price to chuck in a full set of relays from the fusebox please? Supposing they all work that is!Sure I'll think of something else to get my parts bin fuller for the years to come! Cheers buddy.

 

I'll check to see if the relays are on the fuseboard!

 

---------- Post added at 04:30 PM ---------- Previous post was at 04:28 PM ----------

 

hmm.. it should either be beige or grey.. can you post a pic?

 

I'll get a pic, but I think its sold already!

 

---------- Post added at 04:31 PM ---------- Previous post was at 04:30 PM ----------

 

If 8vMatt doesn't take the fogs can I be 2nd on the list please!?

 

I'll take the indicators at the same time if so.

 

No Probs dude :)

[Jon_vr6 1]

How much for the vr6 abs pump, abs ecu (assuming the part number ends in and "E" ) posted

 

Also do you have the wiring loom for the ABS compete and uncut ??

 

Cheers Steve

 

Jon

[fla 9]

i'll take the headlamp loom if Markfoster doesnt, please.

[rado-steve 0]

How much for the vr6 abs pump, abs ecu (assuming the part number ends in and "E" ) posted

 

Also do you have the wiring loom for the ABS compete and uncut ??

 

Cheers Steve

 

Jon

 

I'll get the part numbers for you dude, loom is shot, sorry :(

 

---------- Post added at 10:53 PM ---------- Previous post was at 10:53 PM ----------

 

i'll take the headlamp loom if Markfoster doesnt, please.

 

Okey Cokey :)

[Jon_vr6 1]

I'll get the part numbers for you dude, loom is shot, sorry :(

 

---------- Post added at 10:53 PM ---------- Previous post was at 10:53 PM ----------

 

 

Okey Cokey :)

 

Thanks mate

[Kevin Bacon 5]

Did the rear seats not survive the prang mate, or the arm rest at least?

[rado-steve 0]

Did the rear seats not survive the prang mate, or the arm rest at least?

 

No, bent frames resulting in unable to remove them from the car! May be able to get the hump out though!

[MarkFoster 0]

Hi, any news on the head lamp looms?

 

Mark

[rado-steve 0]

Hi, any news on the head lamp looms?

 

Mark

 

Going over today later this afternoon, to check mate!

[Kevin Bacon 5]

No, bent frames resulting in unable to remove them from the car! May be able to get the hump out though!

 

Cheers chap, I only need the bum pads and the arm rest anyway :D Actually, what interior flavour is it? LOL! Hopefully the black cloth with purple and green flecky bits!

[rado-steve 0]

Cheers chap, I only need the bum pads and the arm rest anyway :D Actually, what interior flavour is it? LOL! Hopefully the black cloth with purple and green flecky bits!

 

can't remember tbf, I'll have to have a nosey!