Jump to content
dragon green

Now with new paint and leather

Recommended Posts

Haven't updated for a while,had an outer cv joint blow its grease every where ! EXCEPT the brake ! Didn't bother fixing it,(I had a spare set of new shafts in my loft,)

Managed to to take a quick pic,

yjupapas.jpg

Over 182k now, 140k are all mine,still love it ! lol

Share this post


Link to post
Share on other sites

Hectic weekend,loads of miles !

Odometer said 515, just filled it up,done the maths,and it works out at 39.97 !

Not bad,was four up for nearly half the distance, and I had to put a golf in its place at the traffic lights Grand Prix

Share this post


Link to post
Share on other sites

Thank you Dave,

Fitted a drinks holder to the front trim tonight,without drilling any holes !

Pinched the idea from a Vortex thread

Pic fitted

qegu8y3e.jpg

Made a small bracket,screwed to the holder(from the rear

4eda5y4u.jpg

The bracket pokes up between the gearbox trim,and bolts to the original bolt

9emuduje.jpg

Everything can be put back to original,leaving no holes,

No more rolling bottle for me on a long journey !

Note,couldn't find a suitable bottle for the last pic,so my stainless cleaner volunteered

urapaja6.jpg

Share this post


Link to post
Share on other sites

Had a road trip to TSR for a light tune (lol) round trip of 405 miles,and still got half a tank of gas !

I did leave at 4:30 am

Share this post


Link to post
Share on other sites

Bought these a while ago of the forum

y2uty2yz.jpg

Blasted,powder coated and R32 bushed,

After nearly 3 years my top mounts are shot ! So I got my mechanic mate to replace top mounts,my wishbones,new ball joints,and while he was at it,he found the drop links were fubared ! (Genuine parts I put on 3 1/2 years ago)

Car feels really tight again,can't push it too much,I put the snow tyres on ! lol

Share this post


Link to post
Share on other sites

My updates are like buses,wait for ages,then two come together !

Noticed the number plate light wasn't working Monday morning,this is what I found

a3u7ageh.jpg

Dodgy soldering,I did this fix about 8 years ago on the original light,replaced light with a new one when I had it resprayed.

Quick solder,and back working

Share this post


Link to post
Share on other sites

A bit of an update,it's took me about 13 years and 158k,but I've finally got in the 200k club

a0589621bf19f5a44379ee5776334cd4.jpg

 

The odometer reading is what I've done on a fuel tank !

Over 1/2 a tank left,read it and weep Vr owners lol

Share this post


Link to post
Share on other sites
My updates are like buses,wait for ages,then two come together !

Noticed the number plate light wasn't working Monday morning,this is what I found

 

Dodgy soldering,I did this fix about 8 years ago on the original light,replaced light with a new one when I had it resprayed.

Quick solder,and back working

 

every time I take that thing out I marvel at the stupidity of the design

Share this post


Link to post
Share on other sites
A bit of an update,it's took me about 13 years and 158k,but I've finally got in the 200k club

a0589621bf19f5a44379ee5776334cd4.jpg

 

The odometer reading is what I've done on a fuel tank !

Over 1/2 a tank left,read it and weep Vr owners lol

 

the display bezel works nicely with the dial rings. Where did you get the dial faces - i much prefer those to the VR font

Share this post


Link to post
Share on other sites

Car went in for its MOT today,14k since last year. Now wearing 204.5k,

WooHoo, it went strIght through,not even any advisories

You people who don't run them as daily's don't know what your missing !

Share this post


Link to post
Share on other sites
Car went in for its MOT today,14k since last year. Now wearing 204.5k,

WooHoo, it went strIght through,not even any advisories

You people who don't run them as daily's don't know what your missing !

 

Nice one!! :thumbleft: Mine's my daily but not doing quite that many miles

Share this post


Link to post
Share on other sites

Had some spare time, so I got the scales out ! Surprisingly its lighter then it left the factory.

Not bad considering all the leather,sound deadening,new engine etc,mine you,the alloy brakes make a big difference.

Apologies for the diagram

34295b354703736ea607b59d09ef436f.jpg

A 63-47% split, I don't know if that's good or not ! Lol

The last rolling road gave me 262bjp,So that works out at 230 bhp per tonne, or lots of smiles per miles

Weighed with 3/4 of tank of petrol

Share this post


Link to post
Share on other sites

I haven't updated for a while,just the normal Corrado maintenance !

Had a slight leak on the sunroof,I've got a long cable I use for this,I rodded the front sunroof drains from the sunroof to the front wings,these are easy to see and do.The rear ones,I find it easier to drop the bumper off,four 17mm bolts and the bumper just pulls off !

The drains are to the side near the wheel arch(sorry no pics,it was drizzling with rain) then it's just a matter of "rodding" the drains to the sunroof opening.Checked all drains were working ok with a large syringe I use,just squirt water in all four corners,and water can be seen running out.

Forecast for the week is getting colder,so greased all locks,and treated all the aperture rubbers to this

fb3deece48a652c76242daf4c1c23950.jpg

I've used this for years,it stops the doors/boot from freezing shut.

Jacked the rear up,and took a slight bit of slack out of the rear wheel bearings.They were new about 3months ago,so just settling in !

Basically a typical weekend maintenance for a daily run Corrado,lol

Sorry for lack of pics,but trying to get done between showers !

Milage just over 216k

Share this post


Link to post
Share on other sites

To celebrate clicking over 220k I thought I'd sort out this,

8a8935e8291c2bed4be778fd8f30319d.jpg

Taking out the bolt you can see the smaller head on it

[f82a04407d780a9a8282b82789de76b5.jpg

You can't machine the outer head,it doesn't leave enough socket,so I machined the "shaft" side,

95a6722aa4f1de151cda5c06f820a6f9.jpg

The finished item,(I will polish out the bolt writing,but as you can see,it started raining)

Make sure you use Loctite on these bolts

b497c2401671a4e08dcb7431e8136b17.jpg

Share this post


Link to post
Share on other sites
I have 4 pots on the front

52848895-382f-27b2.jpg

Stopping power is more then adequate for me !

My trouble is, I now have three sets of 15" Estorils ! lol

 

i hoped i would find a pic of these!

 

very nice - cant wait to see my yellow ones :D

Share this post


Link to post
Share on other sites
Had my spare grill "hydrodipped"

9c4404c0e0003c798021fafcda8cd2b3.jpg

 

That looks great! Seen it done on wheels and had been thinking about it for my Rota's that need a refurb.

Share this post


Link to post
Share on other sites
Forecast for the week is getting colder,so greased all locks,and treated all the aperture rubbers to this

fb3deece48a652c76242daf4c1c23950.jpg

I've used this for years,it stops the doors/boot from freezing shut.

 

hi dragon

 

would you mind divulging what the product name & manufacturer pls?

 

i have used silicon lube in past years but it wasnt too great & leaves a residue

 

thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...