Sam.l 0 Posted March 17, 2013 Thanks for the info on the wing :-) Is it possible to get a price on the wing as it is and if you managed to get it painted? Also do you have any pic's to show the lacquer peal and faded paint? And do you think it could be T-Cutted out? Not looking for it to be perfect, just presentable really. Thanks. Quote Share this post Link to post Share on other sites
Wesleyvr6 10 Posted March 17, 2013 Hi I'm after thee passenger side window trim that runs along the window on the inside please? Quote Share this post Link to post Share on other sites
horney 0 Posted March 17, 2013 Hi, Do you still have the exhaust manifold? I'd be interested if it's in good condition (they're prone to cracking). Cheers, Neil 94 Flash Red 16v Sorry, keep that for my golf. Thanks for the info on the wing :-) Is it possible to get a price on the wing as it is and if you managed to get it painted? Also do you have any pic's to show the lacquer peal and faded paint? And do you think it could be T-Cutted out? Not looking for it to be perfect, just presentable really. Thanks. Wings are scrap sadly, looked at them today and they're just a right state. Hi I'm after thee passenger side window trim that runs along the window on the inside please? Doors went complete today. Sorry. ---------- Post added at 8:09 PM ---------- Previous post was at 8:07 PM ---------- O2A shifter £25 Untitled by Nicholas R Horne, on Flickr Adjustable column (Not including stalks or wheel) Untitled by Nicholas R Horne, on Flickr Spoiler switch and loom £10 Untitled by Nicholas R Horne, on Flickr Exhaust middle section £30 Untitled by Nicholas R Horne, on Flickr 16v clocks in excellent condition with fully working MFA (140,000 miles) Untitled by Nicholas R Horne, on Flickr Boot in excellent condition with small patches of rust behind plinth (loom still attached) £50 Untitled by Nicholas R Horne, on Flickr Front wiper motor £15 Untitled by Nicholas R Horne, on Flickr Rear bumper in excellent condition with only a couple of very small marks. £50 Untitled by Nicholas R Horne, on Flickr Grey Dash shell £30 Untitled by Nicholas R Horne, on Flickr Al the door cards £30 Untitled by Nicholas R Horne, on Flickr Rear wiper motor £15 Untitled by Nicholas R Horne, on Flickr C/L pump housing £5 Untitled by Nicholas R Horne, on Flickr Bonnet hinges £5 Untitled by Nicholas R Horne, on Flickr Sunroof switch and interior light £5 Untitled by Nicholas R Horne, on Flickr Assorted switchs £3 each. Headlight switch £10 Untitled by Nicholas R Horne, on Flickr Sunroof motor £10 Untitled by Nicholas R Horne, on Flickr Boot lock mechanism £5 Untitled by Nicholas R Horne, on Flickr Perfect working boot struts £5 Untitled by Nicholas R Horne, on Flickr Spoiler motor (fully working) £50 Untitled by Nicholas R Horne, on Flickr Completely mint rear lights with bulb holders £20 Untitled by Nicholas R Horne, on Flickr Quote Share this post Link to post Share on other sites
horney 0 Posted March 17, 2013 Rear spoiler in excellent condition £25 Untitled by Nicholas R Horne, on Flickr If you think anything is too pricey then just haggle me, I wont be offended! Nick ---------- Post added at 8:13 PM ---------- Previous post was at 8:10 PM ---------- Not much left and the shell will be goign to be cubed end of the week so if you need anything shout now or forever hold your peace. Nick Quote Share this post Link to post Share on other sites
easypops 8 Posted March 17, 2013 I guess if the doors went , I won't be getting the external scraper? :) No worries Assorted switchs £3 each. I'll take the abs, fog and demister switches please, posted to Glasgow :) Quote Share this post Link to post Share on other sites
horney 0 Posted March 17, 2013 I guess if the doors went , I won't be getting the external scraper? :) No worries I'll take the abs, fog and demister switches please, posted to Glasgow :) Yeah, sorry about that. To be honest I did look at removing and thought I was going to bend it! I'll chuck you a PM with my paypal for the switches. Nick Quote Share this post Link to post Share on other sites
easypops 8 Posted March 17, 2013 Yeah, sorry about that. To be honest I did look at removing and thought I was going to bend it! I'll chuck you a PM with my paypal for the switches. Nick Replied and paid :) Quote Share this post Link to post Share on other sites
Sam.l 0 Posted March 18, 2013 Don't suppose you still have the front bumper?? Quote Share this post Link to post Share on other sites
horney 0 Posted March 18, 2013 Don't suppose you still have the front bumper?? I do but you probably don't want it. It has some bad marks and deep sctraches on it. Ideal for modification and respray, not great if you're looking for a bolt on replacement for a damaged one. Nick Quote Share this post Link to post Share on other sites
Sam.l 0 Posted March 18, 2013 Ah ok, was lookin for the latter really. Dont suppose a quick just to show the condition is possible? Thanks for letting me know mate. Quote Share this post Link to post Share on other sites
wapadrand 0 Posted March 19, 2013 Interested in the n/s rear quarter or as much of rear wheel arch as possible if Kempy no longer interested. Also looking for the n/s sill. Let me know.... Quote Share this post Link to post Share on other sites
horney 0 Posted March 19, 2013 Gotta be honest, cutting bits of panel out isn't really going to happen. I don't have the time and it's now lying on it's passenger side on a concrete floor so probably dented it a bit! lol. Nick Quote Share this post Link to post Share on other sites
Kempy 0 Posted March 26, 2013 im good for panels now thanks Quote Share this post Link to post Share on other sites
sam2.0 10 Posted March 26, 2013 After the following: Drivers door, paint code: LC9Z Drivers floor mat (carpet) ISV Passenger seat forward/backward handle. (the loop of plastic one) Quote Share this post Link to post Share on other sites
horney 0 Posted March 27, 2013 After the following: Drivers door, paint code: LC9Z Drivers floor mat (carpet) ISV Passenger seat forward/backward handle. (the loop of plastic one) Sorry, all those items have gone. Nick Quote Share this post Link to post Share on other sites
16vStyle 0 Posted March 28, 2013 Hi mate, I'm after part of the headlamp wiring loom. Ideally I need the Headlamp and foglamp connectors with a several inches of wire. I've just googled it to grab an image so it's easier to explain.. Is this something you would have? Cheers Simon Quote Share this post Link to post Share on other sites
horney 0 Posted March 28, 2013 Hi Chap, No problem, I can sort all of that I think. I'll go and take a look on Saturday but pretty sure I can get you the whole lighting loom in one piece. Nick Quote Share this post Link to post Share on other sites
16vStyle 0 Posted March 28, 2013 Hi Mate, The whole loom would be awesome in one piece! How much would you want for it? Simon Quote Share this post Link to post Share on other sites
Supercharged Will 10 Posted March 31, 2013 (edited) Nick, I'm interested in the rear hatch if you still have it. Also did the wings go? What's the condition? Plus do you have the sun roof? Edited March 31, 2013 by Supercharged Will Quote Share this post Link to post Share on other sites
ross k 10 Posted April 1, 2013 hi do you still have the interior light and the bit it goes in thanks ross Quote Share this post Link to post Share on other sites
horney 0 Posted April 1, 2013 hi do you still have the interior light and the bit it goes in thanks ross Sure do Ross, it's grey/cream I think. That OK? I'll grab a photo tomorrow for you. Nick Quote Share this post Link to post Share on other sites
G60 CS 0 Posted April 8, 2013 Hi im looking for the front bumper foglights please Quote Share this post Link to post Share on other sites
