Graphite 0 Posted March 1, 2015 (edited) MORE PARTS ADDED ON PAGE 2!! Hi guys, I'm clearing all the parts I no longer need for building my RWD rado. Firstly for collection all items are based in Littlehampton West Sussex, I am willing to post but will I will only post through a collection courier due to work. I can post small parts at the weekends to keep costs down on those. I have a large selection of trim and items such as switches and it will take too long to price everything up, so I will accept offers on any items that do not have prices listed against them, I will also accept offers on priced items also. Please no silly offers, I am looking to raise funds towards a new daily driver. Okay so firstly the bigger stuff: 5x 5x100 PCD 15" Ex works rally magnesium OZ turbine style wheels. I thought I might use these but this is no longer the case, paid £500 for them. £450 G60/16V Eibach front and rear anti-roll bars, although not shown in the pictures I have the bushes for the front and rear + the clamps for the rear, these are £302 new from venom. I can get them powder coated for an additional fee. £210 Early fog lights, pair of. These are as close to perfect as used items could be, no major chipping at all. £100 Single early fog light, off-side fitment, has a visible chip but not bad. £25 Shot-blasted and powdercoated G60/16V Front cross member including shot-blasted and powdercoated brackets. £95 Shot-blasted and powdercoated front radiator support, these always get a little bent in the process on the lip and this panel has some extra holes from where an Oil-cooler was fitted. £50 Shot-blasted and powder coated early fuel tank straps. I do have clamps that have been zinc plated which I can include at extra cost. £40 alone, £50 with zinc plated fixing hardware G60 rear beam with chassis mounting plates, brake compensator arm, stub axles etc all still attached. £80 Powerflex bushes for: Lower arm front bushing, lower arm rear bushing, rear beam bushing, steering rack bushing and front cross member bushing. These have been fitted to suspension components that came on the shell I am building my project into, they NEVER saw the road though so they are effectively new. These total £103.33 from Venom Motorsport. £55 G60 ported and polished throttle body. £90 Edited March 3, 2015 by Graphite Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 1, 2015 G60 clocks - exact mileage unknown ~ 140k - no blue vac sensor - DDI dials, the inverter was a little faulty so the clocks flickered but a replacement inverter is around £15 off ebay. £55 Corrado VR6 front callipers and carriers with braided hoses - included are some EBC greenstuff pads that I'm sure are from a passat but fit the same so I'll throw them in. £45 4x 16" 4x100 Compomotive wheels and tyres (205/45/16) Scrappy condition, need a refurb for road use or just good to move a car around on. £40 G60 timing belt cover, bottom and top half. Top half has been painted and would need a strip back and re-paint. £10 Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 1, 2015 (edited) 2x black dashboard shells £25 each 2x boot carpet in black with spare wheel 'hump' £20 for the top one, £10 for the bottom one Grey door cards £15 2x Power steering rack drop link UJ boots, no splits or tears. £20 each Full black interior trim set including A, B and C pillar trims. Center tunnel trim and gear gaiter surround, tail gate trims, dash under trays, seat runner covers, footwell kick plates, door inner sill covers and parcel shelf supports £155 Edited March 1, 2015 by Graphite Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted March 2, 2015 hi m8 - FYI ESET NOD32 anti virus is blocking the site which is linking to your pictures not sure if anyone else is having the same issue but thought id let you know Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted March 2, 2015 out of interest what are the 4*100 compomotives like? could you PM me a pic pls?thanks Quote Share this post Link to post Share on other sites
easypops 8 Posted March 2, 2015 I can see the pictures Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted March 2, 2015 I can see the pictures you are likely to have different AV m8 my AV is saying that "www.troytempest.com/partsale/IMG_1996.jpg" for example has been blocked Quote Share this post Link to post Share on other sites
easypops 8 Posted March 2, 2015 I'll take your word mate, no idea what AV I have or not :lol: . I'm on my iPhone Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted March 2, 2015 I'll take your word mate, no idea what AV I have or not :lol: . I'm on my iPhone ha ha that would be a 'none' then m8 if your on your iphone ;) PMSL thanks for the idea though, will take a look at them on there Quote Share this post Link to post Share on other sites
GlosterOx 0 Posted March 2, 2015 Can see the pics fine @ work using Firefox and Kaspersky AV. Ian. Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted March 2, 2015 Yeah pics blocked for me too Quote Share this post Link to post Share on other sites
dragon green 5 Posted March 2, 2015 Pics ok on my iPad Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 2, 2015 (edited) I get this pictures thing a lot. I'm seeing if there's anything I can do with it. If you cant see them try on your phone, The files are quite big. IF YOU ARE GETTING IMAGES BLOCKED THEN PLEASE FOLLOW THIS GUIDE TO ADD MY SITE TO YOUR NOD AV SAFE LIST: You need to add troytempest.com to the safe list http://www.askvg.com/fix-access-denied-website-blocked-by-eset-nod32-antivirus-due-to-dangerous-content/ Edited March 2, 2015 by Graphite Quote Share this post Link to post Share on other sites
jamie_300 0 Posted March 2, 2015 Hi there, I'd be interested in one of the black dash shells and under trays, and the better condition boot carpet. Would you be willing to let the. Under trays go with the dash she'll? Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 2, 2015 Hi there, I'd be interested in one of the black dash shells and under trays, and the better condition boot carpet. Would you be willing to let the. Under trays go with the dash she'll? Good thing I have two sets of dash under trays then :) I will check the condition of them tomorrow and get you some pics and discuss prices once you've seen them. Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted March 3, 2015 I get this pictures thing a lot. I'm seeing if there's anything I can do with it. If you cant see them try on your phone, The files are quite big. IF YOU ARE GETTING IMAGES BLOCKED THEN PLEASE FOLLOW THIS GUIDE TO ADD MY SITE TO YOUR NOD AV SAFE LIST: You need to add troytempest.com to the safe list http://www.askvg.com/fix-access-denied-website-blocked-by-eset-nod32-antivirus-due-to-dangerous-content/ superb thanks for that advice graphite - worked a treat unfortunately though im not interested in the 4*100 wheels the prodrive mags on the other hand are tempting but i just cant afford them at the moment Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 3, 2015 (edited) 2x Black carpet sets. Heel pads on both are in very good condition. £45 each 2x Black rear quarter boot carpets (both sides) £27 each Early centre console in great condition £25 Momo steering wheel boss £20 Universal rear strut brace £20 G60 throttle cable £7 G60 valve cover, sand blasted £25. G60 boost return pipe £30, 3x G60 airbox to supercharger air intake pipe £10 each. Oil catch can, offer me! Rear G60 painted white, £10. Rear 16V badge, chrome is in immaculate condition £40 G60 ABS ECU, wiring loom and dash light. This was working when removed from the car, no faults. £80 Edited March 3, 2015 by Graphite Quote Share this post Link to post Share on other sites
geoffersmaher 10 Posted March 17, 2015 Hi there Do you still have the poly bush? If so please pm me Also if you have any light parts http://the-corrado.net/showthread.php?t=89783 Can you help Ta Geoffrey Quote Share this post Link to post Share on other sites
sankysvr6 0 Posted March 17, 2015 Hi, Can you let me know what the part number is on the boost return pipe? Also do you know why the bit the attached to the supercharger, is half way up the pipe. Is this part broken or something? Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 17, 2015 I can get the part number for you. The collar being up the pipe is nothing unusual, they can move freely when unbolted, it basically acts as a clamp on a swaged section of the pipe where it sits into the charger return outlet. Quote Share this post Link to post Share on other sites
sankysvr6 0 Posted March 24, 2015 Still waiting with anticipation Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 24, 2015 Sorry I am in the middle of moving house so a bit busy. I will endeavour to get this for you tomorrow. Quote Share this post Link to post Share on other sites
kevwil1968 1 Posted March 24, 2015 do you have sunroof and internal heater blower/resistor ? Quote Share this post Link to post Share on other sites
Graphite 0 Posted March 24, 2015 Sorry I have neither of those parts. Quote Share this post Link to post Share on other sites
