dsilva
-
Content Count
27 -
Joined
Everything posted by dsilva
-
Were is the best place to mount them when welded up
-
Hi what you need to do is go to tesco and buy the biggest fish you can and slap them till the come to there senses lol :nuts:
-
Sorry fella me being a spoon a meant to say weld them up lol
-
Hi has any body removed the jets off the bonnet I have got to respray my bonnet after a full respray due to some1 from work I sacked key it
-
Are the drivers arms off a 2008 tt the same it's a mk2 tt or does any 1 no what year and mk 2 get many thanks
-
I have the same prob with my uther halfs 1.0 Lupo the plugs have to be bosh and the leads have to be dealer to and make shore u check the compression it's a commen prob the engine gets I little tappy and it's the tapetts and the rockers I have the engine out at the mo and I replacing the rockers good luck. Regards Adam
-
Hi there currently running 225 tt with ko4 with 2l16v box and it great fun loads of power bit to much in 1st but top end it's just revving very hight and I've just killed a new clutch but whats the best setup that would drop the rev down topend and what clutch works well any help would be great Thanks adam
-
Hi do you have a pic of the stretch some times you have to clean the inside lope of the wheel then put the bead sealant on just take the wheel off urself and poor water on the bead so u van see 4 ur self were it's leaking Hope this helps
-
Hi there ive droped my rado as low as i can on 17inc rims and now the wheel is sitting forward and im getting a scrubbing on the arch will these help i dont want any more neg camber as ive got a camber kit allready any info would be great many thanks adam
-
hi there does any 1 have a pic of theses brakets if so that would be helpfull thanks
-
Yea count me in carpet and mats sounds good to me
-
hi there im after a eye brow spoiler ive got 1 thats deep over the headlights and smaller in the middel but im after 1 thats the same side all the way across were can i get 1 without buying the all in 1 grill and eyebrow as my grill is ok thanks :(
-
hi there i love the heater controls haw do i fit them and whats needed :notworthy:
-
Hi there ive got a 20v in my old 2lt 16v i really want a big brake set up but i would like to keep my 4 stud whats the best set up im running 17" wheels so i was thinking about 300mm + lol any good ideas please
-
My 16v Corrado.. Featured in this months (Jan 2010) PVW!
dsilva replied to Bally's topic in Members Gallery
hi there love the car repect were its due. what wheels are they and what size are they keep up the good work. silver -
hi there ive just finished my project and i love it my flash red 94 2.016v is now purple and looking good with an audi 20v from an s3 only prob is it kepps spining up every were lol when im doing 70mph on the a12 and put my foot down it just go`s put i get a bit of a smell and some times when you really go 4 it slight bit of smoke is it my cluch i dont no heeeelllllppppp plz many thanks adam
-
hi there if you buy 2 90 exh bends from you car accessories shop and clamp them together so u get a s shape that will do away with the mid box and it does not go to load and is a cheap but good fix :norty:
-
you can get bonnet cables from euro carparts and they are u just as good as stellers :lol:
-
hi there ive got a 20v in my 2.0 16v and i was woundering about the oil temp what do i have to do plum it in im not sure what part i need to get thanks
-
HI THERE IVE GOT A BAM ENGING IN MY 94 ITS RUNNING BUT NOT 100% I THINK IT COZ OF THE VACUM HOSES. IVE USED A PUG AND PLAY FROM QP SO IF ANY 1 NO`S WERE THEY GO THAT WILL BE GREAT.
-
my 20vt corrado ... the saga continues
dsilva replied to barryarginnraddo's topic in Members Gallery
Hi there in the middle of my project fully strip engine bay full painted and now finally running thank GOD never thought it would get this far quantum diy kit is not that easy but still its running does any one no were all the vacum pipes go running bam enging and a recirculating dump valve as its doing my head in :shrug: -
if your still looking ive got 1 out of my 94 its in good shape
-
hi there help please i got a company doing a 20v swop from an s3 wit a ko4 turbo and im going to be running a stand alone management system but what down pipe do i need many thanks adam