robdriver

What a bonehead I am. It's a 1.8t 20 valve The car is in West London and I am in nottingham I have had some offers. Anybody else interested please get in contact as I will soon make a decision on what offer to accept

Hi All After a recent job change that has meant I have to move city I am struggling to complete this 24v conversion My car was originally a very clean 8 valver and was very happy with it It was my daily driver for 4 years I have installed Weitec KW coilovers and golf 4 rear calipers and new lines Then installed angel eyes and remote central locking Then decided to install a 20 valve...nothing wrong with the 8v I just wanted to play (had another daily driver) refurbished a Audi TT APP unit and attached my gearbox with uprated 5th gear (longer) Cyl head skimmed..new valve guides and valves lapped....have a complete new gasket kit. Head needs to be installed Bought complete widetrack VR6 suspension and refurbished with powder coat and brand new control arms bearings rod ends discs all round I have a new intercooler and turbo and manifold new in box Now the trouble is I no longer have a garage or anywhere to work from and I'm living in another city from the car The car is a rolling chassis on the original suspension and is ready to receive complete refurbished suspension and engine and brakes etc It will come with the original 8v motor as well The items you will need to source are a QPENG ecu kit or ECU and exhaust mods It could do with a drivers seat recover bodywork is excellent but has signs of bubbling on 1 rear arch Ive owned it about 6 years in all make me an offer and I may just accept I am looking to rent a garage but haven't found anything suitable to complete the car but this may change as its a sad day having to sell email me on [email protected]

Hi all Can anyone advise me on fitting the Teves 20 to my late model 2.0 8V Corrado….On reading this I don't think the last 8valve models were the same as all the others as I struggled to get a master cylinder a few years ago…..My car has the ABS pump fitted to the firewall but it only has two outlet pipes on the master cylinder instead of the 4 as on VR6… it seems to have a travel sensor on it….( can i leave this in place and just don't connect it up https://drive.google.com/file/d/0B981VOwPwLQLcUQwb2dsTTRqR3M/view?usp=sharing Any help appreciated Thanks

Can anyone suggest a good workshop manual that covers the 1.8t 20 calve engine I have started my 20vt project and busy getting the engine ready any suggestions thanks

I have been stewing on doing an ABF mod to my 8valve but lately I have become more interested in the turbo option I have a pristine 8 valve but it was a daily driver and is about to hit 200000 miles ......no smoke or oil used and runs like a top. It has had a respray and debadged grille with Borbet A. looks fab I bought the car due to loving the Corrado shape As it was going to be a daily driver I chose the 8v as most 16v were driven hard I run a small racing team and have access to my own rolling road I have a Motec ECU with CDI spark unit that I intend to use and all the sensor that I could possibly need I am also lucky in that I have access to a full machine shop to do any modding or fabrication. I want to bolt in the 1,8t and then work on all the extra's over the next year as I have another daily driver now Now there will be questions What intercooler to go for as the two options so far are Sprinter and landrover TD5....TD5 seems better so far I have bought an APP 20VT engine without turbo and will investigate what to do with the lack of turbo next Ive found an exhaust manifold that accepts a T25 that seems like a better option than going with the stock K03... What do you think?

I have been stewing on doing an ABF mod to my 8valve but lately I have become more interested in the turbo option I have a pristine 8 valve but it was a daily driver and is about to hit 200000 miles ......no smoke or oil used and runs like a top. It has had a respray and debadged grille with Borbet A. looks fab I bought the car due to loving the Corrado shape As it was going to be a daily driver I chose the 8v as most 16v were driven hard I run a small racing team and have access to my own rolling road I have a Motec ECU with CDI spark unit that I intend to use and all the sensor that I could possibly need I am also lucky in that I have access to a full machine shop to do any modding or fabrication. I want to bolt in the 1,8t and then work on all the extra's over the next year as I have another daily driver now Now there will be questions What intercooler to go for as the two options so far are Sprinter and landrover TD5....TD5 seems better so far I have bought an APP 20VT engine without turbo and will investigate what to do with the lack of turbo next Ive found an exhaust manifold that accepts a T25 that seems like a better option than going with the stock K03... What do you think?

Wow! Had a look at that web site and see they have a great range at a great price.........Wont be able to afford the work I want to do at that price....still very nice car glove for your favourite toy

Thanks for all the interest....reading all the adverts I see that a breathable one is a good idea! I am very worried about the cover scratching my car as it has a great high shine finish that I spend a lot of time keeping good. Thanks for the offer ridlymaca....I will see where this leads me and may still be interested if the cover is the right one Looking on their website they have two versions a 49.99 and a 34.99.......which would yours be?

I will be taking my Corrado off the road for a couple of months to do some work on it I will need to store outside and ask if anybody can recommend a car cover that fits nicely and does the job Soo many options on the net that my head is spinning! Happy New Year All!

I already feel that I need to install a longer 5th gear on my current setup so don't think any issues with gear ratio on this box. The better power should easily pull higher gears and more speed and better economy, Point taken and ill research the gear ratio's on the net

Thanks for the help so far So I need engine only not the gearbox from ABF (use my original ADY box) I need the ABF wiring loom and ECU pre 95 engine wont need key and transponder otherwise will need that What about clutch and flywheel....ABF or ADY one?

I have been doing a bit of research on installing the ABF 2.0 16v into my Corrado 8v My car is one of the last made fitted with the Mk3 Golf 2.0 8v 115ps lump and it seems that the ABF goes straight in onto my original gearbox. I am very happy with the current motor as a daily driver but as its approaching 180000 miles it will need refreshing sometime I just missed an auction to buy an engine but it was because I was worried as the what parts I need to get from the donor car What do I need from the donor car Engine only ...... I believe my box fits ABF fine......is this correct Engine ECU ...... do I need to take the ABF engine ECU and wiring harness........ key ...............do i need the ABF donor car ignition barrel? exhaust............does the ADY exhaust fit the new ABF manifold clocks.............read somewhere that my clocks are fine with ABF engine engine mounts......will the standard ones fit BONNET.............I have the late model bonnet is there anything else I need to know to do this conversion and would you recommend it or suggest I rebuild by stock 8V engine instead

I have been doing a bit of research on installing the ABF 2.0 16v into my Corrado 8v My car is one of the last made fitted with the Mk3 Golf 2.0 8v 115ps lump and it seems that the ABF goes straight in onto my original gearbox. I am very happy with the current motor as a daily driver but as its approaching 180000 miles it will need refreshing sometime I just missed an auction to buy an engine but it was because I was worried as the what parts I need to get from the donor car What do I need from the donor car Engine only ...... I believe my box fits ABF fine......is this correct Engine ECU ...... do I need to take the ABF engine ECU and wiring harness........ key ...............do i need the ABF donor car ignition barrel? exhaust............does the ADY exhaust fit the new ABF manifold clocks.............read somewhere that my clocks are fine with ABF engine engine mounts......will the standard ones fit is there anything else I need to know to do this conversion and would you recommend it or suggest I rebuild by stock 8V engine instead

Hi Jacqui I have set of Jamex Coilovers that came off my Corrado 2.0 My Corrado failed an MOT as a helper spring had cracked and as the car is my daily driver I had to fix it quick I went out and bought a new set of coilovers as I couldnt find Jamex Replacement Springs in a hurry Well after passing MOT I had time to look for the Jamex parts needed and have found that they are readily available from Demon Tweeks I therefore have a full set of Jamex fully adjustable coil overs for sale that will come with new springs both main and helper springs The damper bodies are a gold colour and you can even choose what colour you want the springs powder coated.......the reason for this is that I couldnt get helper springs with the same colour so have taken them to be painted I would be looking for £300 for the lot and can even send them boxed in the new Weitec Box that my replacements came in By the way I love the look of your car which is soo similar to mine so have attached a picture Yours wins the polishing contest however Please let me know if your interested Rob

Was wondering if you still had these alloys available for swap / sale I have Borbet A on mine and love the look but fancy a change Seen a picture of yours on a Corrado and I loved the look I need 4 x 100 as mine is a 2.0 Thanks