owen g60
-
Content Count
1,264 -
Joined
-
Last visited
-
Days Won
1
Everything posted by owen g60
-
on my old rad cover there was the silver one from this picture... infact all of them except the oil one were on there
-
The postman was nice enough to bring me this today New bearing and seal set for the charger. Will attempt the build soon
-
havent got them yet but may well do now good spot
-
get your error codes read with vagcom. I had this same problem and it was my front passenger hub nut coming undone and varying the distance to the sensor. Changed the bearing and nut problem solved
-
Not seen your car about for a while. Hope all is good with it.
-
Here it is
-
go to your nearest GSF with this part number 120VG0170 this will get you a MANN filter with the one way valve in it heres the description and part comparison from their website Comparison numbers 037 115 561 VAG Height 123 mm, Inner Diameter 62 mm, Inner Diameter 1 71 mm, Outer Diameter 76 mm, With one anti-return valve, Thread Size 3/4-16 UNF, Opening Pressure Bypass Valve 2,5 bar
-
mann filters are the original OE item... My last one came from GSF and was a MANN one with the VW markings on it
-
Another bad day in the life of the G60 today.... Got me to work fine this morning... 9 hours later i go out to start it and it turns but wont fire. It is fueling but not sparking, managed to get it to run a couple of times for maybe 30 seconds then it just died. Didnt have the time to look at it so i have left it in the secure compound round the back and will get someone to take it away tomorrow morning and solve the issue.
-
I'm in Poole. There are probably at least 10 rados within a couple of miles of my house!!!
-
Sorted now cheers :)
-
i had a plate made a while ago when i first did my front mount intercooler.... think its in my thread. I have now deleted the boost return so am thinking of using this plate and a silicone bend to join it to the airbox. Im thinking 45 degree bend somewhere between 75 and 80mm on the airbox side
-
Hi guys probably quite a simple question. What size is the hole on the air box that the charger connects to?? My gut feeling says 79mm also what angle hose would i need to get to do this?? Im asking as i have a 63mm outlet plate made for it and would like to attack it to the air box as the original hose is splitting and i dont want to get and crud in the charger for obvious reasons
-
is there any reason why tapatalk now doesnt worksice cloudflare has been disabled. I just get a message that my failed log in attempts have been used up please wait 15 minutes..... no matter how long i wait i get the same message
-
I'll keep that in mind if I balls this set up Sent from my iPhone using Tapatalk
-
Tempting but it's a trek for me to retrieve it Sent from my iPhone using Tapatalk
-
As per the title All in working order please Sent from my iPhone using Tapatalk
-
Where is it located?? Could do with another project once my paint is done Sent from my iPhone using Tapatalk
-
There should be 6 clips that hold the heater assembly to the fan and duct. 2 on the front and back 1 on the top and bottom. They're where the duct meets the heartier assembly. Once these are removed you should be able to wiggle the fan and duct through the wires Sent from my iPhone using Tapatalk
-
pm me with price etc its fine for what i want to do
-
Ah probs won't have obd then Sent from my iPhone using Tapatalk
-
Another thought on the hunting. Did you connect the ecu to throttle body vacuum hose to the correct place. There are 2 ports on the back of the throttle body. Also make sure the cable is exactly 1 meter long as this won't help also Sent from my iPhone using Tapatalk
-
Shouldn't use any silicone based lubes on the intake side of things. It hurts the O2 sensor. As for lubing the isv. If you look in the inlets on it there should be a valve just depress it an use your lube of choice. If I remember correctly there is a small Allen screw in one end you may need to tighten this as the internals become a bit 'loose' over time. Sent from my iPhone using Tapatalk
-
It sits on top of your rocker cover. Has 2 pipes, one to the intake manifold the other goes to the boost return for the charger. Soak it over night in carb cleaner. Then lightly grease the valves inside it. Use non silicone based grease for it Sent from my iPhone using Tapatalk
-
Chassis number is WVWZZZ50ZNK011927 It does have the 2+2 connectors I can't get VCDS to do anything except ABS errors Sent from my iPhone using Tapatalk