owen g60
Members-
Content Count
1,264 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by owen g60
-
I have a couple but not sure if their OEM. As had no packaging and got with the car. Turned out to be the wheel bearing causing the error Sent from my iPhone using Tapatalk
-
Wheel advice Re staggered offset and wheel choice
owen g60 replied to Human Joist's topic in Exterior
205's on the rear and 195's on the front of my 9J's Stretch is quite extreme on the front but looks good :) Sent from my iPhone using Tapatalk -
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
can you pm me payment details. I will require them posted. will put address in mail -
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
also do the coilovers have topmounts fitted?? -
Wheel advice Re staggered offset and wheel choice
owen g60 replied to Human Joist's topic in Exterior
im running 9X16 et35 Borbet A's all round on mine dont get any issues with scrubbing even the fronts are ok on the inner arch too could probs drop it a little more and still be ok too -
yes the needles will just lift off
-
Here you go Sent from my iPhone using Tapatalk
-
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
ill have a look to see if i can source a spanner. what size are the nuts 2.5 or 2.25 inch?? -
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
Do you have the C spanner for the coilovers?? If so how much posted for the whole set -
early "g" 1990 white 1.8 16v corrado breaking
owen g60 replied to trevyt's topic in Cars for Breaking
is the price for the coilovers posted?? -
Breaking 91 .corrado early 16v NOW WITH FREE POSTAGE
owen g60 replied to rodmax's topic in Cars for Breaking
i require one with all the clips im afraid -
Will do when I get home from work Sent from my iPhone using Tapatalk
-
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
Grill spoiler. Bonnet. Splitter and A B C trims. Posted price please Sent from my iPhone using Tapatalk -
I have a spare gauge that came out of my old clocks Sent from my iPhone using Tapatalk
-
Breaking 1992 Corrado 2.0 16v - Prices Lowered To Clear!
owen g60 replied to pettsy's topic in Cars for Breaking
Can you pm me what's left of this one as I'm after a few bits Sent from my iPhone using Tapatalk -
Breaking 91 .corrado early 16v NOW WITH FREE POSTAGE
owen g60 replied to rodmax's topic in Cars for Breaking
Rod do you still have the number plate plinth. Are all the clips present Sent from my iPhone using Tapatalk -
There's a 10mm bolt just by the heater intake on the scuttle tray. Undo this and disconnect the loom. Slide the ecu towards the centre of the car then twist towards the front... It may take a bit of wiggling to get it out but it does come Sent from my iPhone using Tapatalk
-
pm me address and ill send paypal details
-
sorry only have one switch... could swear i had 2 :(
-
do you have adrilled airbox and aftermarket filter.... i have the same problem as i have also removed the carbon canister so whilst driving there is a lot of moisture around the intake area. or check the grub screw on the back of the throttlebody these o rings perich for a past time leaking boost and will let moisture in
-
Disconnect them from the charger, throttle body and intercooler and remove from the car. Blast through with some degreaser and a jet wash Sent from my iPhone using Tapatalk
-
Just contacted HIC as they were listed as a good bet... they beat footman james by £10 and accepted all the mods :)
-
what price you thinking?? £25 posted sound good?? PM me for paypal details
-
in that case i have a couple. just to confirm is the connector on the loom about 5/6 cm long ?? should have 5 pins in it... not necessarily all having wires going to them
-
which type of connector do you have to plug into it. a square 3 pin one or long thin 5 pin one??