daves16v 1 Posted June 4, 2012 (edited) I've been wanting to get this done for a while and have now found the time. I'm now able to supply hand Polished Stainless Steel screws and washers for the Slam Panel and Headlights, see photos attached. The headlight screws are notorious for corroding to the point that they round off when trying to remove them and this is more of a pain for the hidden screw at the headlight bottom mounting. The slam panel screws don't corrode quite as bad but it's nice to replace these to brighten things up. The washers for the slam panel screws are not off the shelf items, they have been made to suit the original size washers but are thicker, please note there is only one side polished so obviously this side goes up. The slam panel screws are the same for the wings. Kit A (VR6) 25mm Headlight bottom mounting screw - 2x 16mm Headlight top mounting screw - 4x 16mm Plastic cover screw - 1x 16mm Radiator cover screws - 2x Washers to suit the above - 9x £5.50 posted Kit B This kit includes the 4 visible screws (2 each side) on the top of the slam panel Complete set of slam panel screws – 14x Washers for the slam panel screws – 14x 16mm Radiator side cowl + washers - 2x M6 Power steering pipe + washers - 2x £12 posted Kit C This kit is for the 4 screws on top of each wing Wing screws – 8x Washers for wing screws - 8x £7.50 posted Kit D This kit is for the 4 screws on the top of the slam panel ONLY Top slam panel screws – 4x Washers for the slam panel screws – 4x £4.50 posted Kit E Fog/Indicator housing screws – 8x £2.50 posted Kit F Tailgate strut screws (hand polished heads) - 4x £3 posted Choose the kits you want and total up the cost. Payment by Paypal or Bank Transfer. Of course these are produced to my usual high standards. Thanks Edited April 2, 2014 by daves16v Quote Share this post Link to post Share on other sites
P3rks 11 Posted June 4, 2012 Can you get the screw for air intake cover? In the top middle of the 2nd photo. Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 4, 2012 Can you get the screw for air intake cover? In the top middle of the 2nd photo. I did consider that one but decided not to include it. Yeah I can throw that one in too. Quote Share this post Link to post Share on other sites
smudge 0 Posted June 4, 2012 Can I have a set with the intake cover screws too please. Will pm. Quote Share this post Link to post Share on other sites
DANG60 0 Posted June 5, 2012 Hi Dave. I will take some of these. Don't worry I don't already have these lol. I would like enough to do the slam panel as well. I don't have my car to hand could you tell me if the wing securing bolts Deffinately do the slam panel or do I have to add on another 4. Just to be clear I would like the full set that includes wing securing screws also. Many thanks Dan. Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 5, 2012 Hi Dave. I will take some of these. Don't worry I don't already have these lol. I would like enough to do the slam panel as well. I don't have my car to hand could you tell me if the wing securing bolts Deffinately do the slam panel or do I have to add on another 4. Just to be clear I would like the full set that includes wing securing screws also. Many thanks Dan. Dan, To do the whole of the slam panel (including the 4 in the photo) you will need 14 screws. Then an additional 8 for the wings. So add £9 for the additional screw/washers (18x). Total for the complete set including the headlight screws is £16.50 posted. Hope this is clear. PM me if you would like to order. Thanks Dave Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 5, 2012 How much for ones to do all slam panel and both wings, I just bought the headlights screws from vw so don't need them. Sent from my X10i using Tapatalk 2 Quote Share this post Link to post Share on other sites
dragon green 4 Posted June 5, 2012 How much for ones to do all slam panel and both wings, I just bought the headlights screws from vw so don't need them. Sent from my X10i using Tapatalk 2 X2 can you get hold of the front arch liner screws in stainless ? Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 5, 2012 Updated to reflect requests. ---------- Post added at 8:11 PM ---------- Previous post was at 8:10 PM ---------- can you get hold of the front arch liner screws in stainless ? Yes I would think so. Quote Share this post Link to post Share on other sites
dragon green 4 Posted June 5, 2012 Money and address sent via paypal (gift) for sets B&C, Let me know if you can get the arch liner screws, It was good to meet you at the Nationals,i and many others appreciated your dedication and hard work, Bryan Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted June 5, 2012 Good stuff this. Didn't know the slam panel had 14 bolts though? Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 5, 2012 Money and address sent via paypal (gift) for sets B&C, Let me know if you can get the arch liner screws, It was good to meet you at the Nationals,i and many others appreciated your dedication and hard work, Bryan Good to meet you too Bryan. ---------- Post added at 8:42 PM ---------- Previous post was at 8:39 PM ---------- Good stuff this. Didn't know the slam panel had 14 bolts though? There are 4 on the top, 1 each side attaching to the wing, 2 each side just under the headlights, 1 each side behind the slam panel and 2 at the bottom centre of the slam panel. I know all this as I've just had it off to install the new radiator. Quote Share this post Link to post Share on other sites
tbvr6 0 Posted June 5, 2012 Hi Dave, I have sent you £17.50 via PayPal gift for the following: 1 x Kit A 1 x Kit B 1 x Kit C Hope that is okay. Cheers, Tony Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 5, 2012 Hi Dave, I have sent you £17.50 via PayPal gift for the following: 1 x Kit A 1 x Kit B 1 x Kit C Hope that is okay. Cheers, Tony Yeah fine, thanks. Can you PM me your postal address please. Dave Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted June 5, 2012 Think I might need this then. Mine only has 6 bolts :-) Quote Share this post Link to post Share on other sites
Riley 0 Posted June 5, 2012 I'd like Kits A,B,C please Dave. Just to confirm, that would also include the 4 slam panel screws/washers in your pic? PM coming. Neil. Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 5, 2012 I'd like Kits A,B,C please Dave. Just to confirm, that would also include the 4 slam panel screws/washers in your pic? PM coming. Neil. Yes correct. Quote Share this post Link to post Share on other sites
Riley 0 Posted June 5, 2012 Cheers Dave, pm sent to sort payment. Neil. ---------- Post added at 10:09 PM ---------- Previous post was at 9:53 PM ---------- Payment sent for A,B,C. Neil. Quote Share this post Link to post Share on other sites
tbvr6 0 Posted June 6, 2012 Yeah fine, thanks. Can you PM me your postal address please. Dave You should have this by now via PM. Let me know if you have not got it and I will resend. Thanks, Tony Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 6, 2012 You should have this by now via PM. Let me know if you have not got it and I will resend. Thanks, Tony Yes got it. Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 6, 2012 After getting this 1st batch ready to post, I've slightly underestimated the time taken to produce,bag and post the large slam panel/wing screws and washers so I've increased the prices slightly. I will honour orders already placed at the old price. Thanks. Quote Share this post Link to post Share on other sites
dragon green 4 Posted June 6, 2012 Dave, If you can get me the other screws,please put the extra onto them ! If not,let me know what shortfall is needed,and will send money over ! Bryan Quote Share this post Link to post Share on other sites
jamiehamy 0 Posted June 6, 2012 I'll go for Kit A and Kit B please. £15.50 in total, can you let me know paypal addy by PM please? Any idea where can I get the plastic grommetty things that the headlight screws go into. Mine are in poor condition, but I don't even know what they are called never mind where to get them. Looking forward to getting these :) Quote Share this post Link to post Share on other sites
daves16v 1 Posted June 6, 2012 Dave, If you can get me the other screws,please put the extra onto them ! If not,let me know what shortfall is needed,and will send money over ! Bryan I'll have a look at them. ---------- Post added at 10:48 PM ---------- Previous post was at 10:46 PM ---------- I'll go for Kit A and Kit B please. £15.50 in total, can you let me know paypal addy by PM please? Any idea where can I get the plastic grommetty things that the headlight screws go into. Mine are in poor condition, but I don't even know what they are called never mind where to get them. Looking forward to getting these :) I believe they are call 'insert nut', try the dealer. Will PM you now. Quote Share this post Link to post Share on other sites
