dragon green 5 Posted May 18, 2015 Spoonfedtuning in the States make fibreglass wings,they will send them here if you ask nicely Quote Share this post Link to post Share on other sites
Gwr vr6 10 Posted May 18, 2015 Please correct me if I'm wrong . But those wings at 400 dollars plus shipping plus import tax . ? If any ? Wouldn't it be better to just have a second hand pair fully repaired . Rust treated then stayed and fitted ?? Quote Share this post Link to post Share on other sites
Jim 2 Posted May 18, 2015 I had my wings rust treated and painted. One of them was bubbling up again within 6 months. At least taking the fibreglass route you eliminate that risk. Quote Share this post Link to post Share on other sites
dragon green 5 Posted May 18, 2015 The originals weigh next to nothing,I can't see fibreglass being a weight saving exercise ! Quote Share this post Link to post Share on other sites
Gwr vr6 10 Posted May 18, 2015 Hmm good point jim . Subaru rear arches are the same on a classic Scoob . Has any one on here got these fitted then ?? As Im a bit sceptical on fibreglass . But yes it has got loads better over the years . Not like the old mk3 escort body kits lol Quote Share this post Link to post Share on other sites
p0l1wrath 10 Posted May 18, 2015 Not really looking for weight loss but more for future proofing, I don't really wanna pay carriage and import from the states, I have email lws and they say they are working on the kit to make them, and I've asked for a date and a price, going through a front end face lift at the moment so looking to get them soon Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 18, 2015 I have someone hopefully fabricating some over the autumn / winter so will report back on quality and price Quote Share this post Link to post Share on other sites
p0l1wrath 10 Posted May 18, 2015 Yeh, want them very soon, will be looking into moulding my own if I can't get them for when I want them, will be offering possibly a few sets on here if all goes well Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 19, 2015 Hi mate have pair of wings going to the guy tomorrow. Are you wanting standard flare or pulled I am after pulled arches for my wheels but he may do two sets of moulds if I ask nicely Quote Share this post Link to post Share on other sites
Gwr vr6 10 Posted May 19, 2015 I'm after a pair of standard wings for an L reg what sort of money do these go for please lil fuzzer Quote Share this post Link to post Share on other sites
p0l1wrath 10 Posted May 19, 2015 I'm after standard flare Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 19, 2015 ok dude will ask if he fancies doing both Quote Share this post Link to post Share on other sites
20vtvw 0 Posted May 19, 2015 I wouldn't mind a pair too fuzz depending on price and quality ,think I want flared with stock line if that makes sense? Quote Share this post Link to post Share on other sites
p0l1wrath 10 Posted May 19, 2015 Nice one mate Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 19, 2015 Yeah russ mates sense Gwr not sure yet as he hasnt seen the wings yet but early thoughts are around 220 a pair Quote Share this post Link to post Share on other sites
Gwr vr6 10 Posted May 20, 2015 Cheers mate thanks . At that price deffo intrested tbh . As they do let my car down bad . Them and front bumper and bonnet . Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 20, 2015 No worries biddy Quote Share this post Link to post Share on other sites
jamie_300 0 Posted May 20, 2015 would also be interested in that price! Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 20, 2015 Standard jamie? Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 25, 2015 Standard volk? Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 25, 2015 The mold for the standard currently in production Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted May 25, 2015 Need to work on a pair of arches so they can do the flare ones Quote Share this post Link to post Share on other sites
davevw 0 Posted May 26, 2015 could be interested in a flared pair,chris im running ET 25 mate Quote Share this post Link to post Share on other sites
