Cressa 44 Posted February 20, 2020 191906231D 5 pin flat connector needed. Used at ABS light and various other places... Cheers Quote Share this post Link to post Share on other sites
Keyo 47 Posted February 20, 2020 Have you tried the dealers mate I think they sell them for a few quid. Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 20, 2020 Only worked out tonight that this is what I need. I have done a search on classic parts and it says obsolete...... hopefully it isn't and I'll give them a call tomorrow Quote Share this post Link to post Share on other sites
Keyo 47 Posted February 20, 2020 Probably not gone over to classics mate as it was used in loads of VAG vehicles and still in the dealers stock pile. 99 percent sure . Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 20, 2020 I'll take that positiveness 😄 Quote Share this post Link to post Share on other sites
tonedef 9 Posted February 21, 2020 Are you sure it's a 5 pin at the ABS light? Mine has a 7 pin plug, which is a shame as the Passat B4 lamp I'm wanting to fit in has a 6 pin socket. Going to be digging in my wiring loom box tomorrow see if I can find one, if I come across a 5 pin I'll give you a shout! Quote Share this post Link to post Share on other sites
easypops 8 Posted February 21, 2020 1 hour ago, tonedef said: Are you sure it's a 5 pin at the ABS light? Mine has a 7 pin plug, which is a shame as the Passat B4 lamp I'm wanting to fit in has a 6 pin socket. Going to be digging in my wiring loom box tomorrow see if I can find one, if I come across a 5 pin I'll give you a shout! I’ve just checked the back of the abs light on mine, 7 pins but only 5 getting used. Possibly the same thing? I also might have one but I’ll need to check the breaker cars I have. On another note, I guess you are doing your Teves20 swap Tonedef? I don’t suppose you’ll be doing a wee how to write up? 🤞😁 Quote Share this post Link to post Share on other sites
seanl82 23 Posted February 21, 2020 (edited) There are early and late types. The late types are 5 pin if I remember correctly, and the also have a red 9 pin (I think) plug which goes below Edited February 21, 2020 by seanl82 Quote Share this post Link to post Share on other sites
tonedef 9 Posted February 21, 2020 2 hours ago, easypops said: I’ve just checked the back of the abs light on mine, 7 pins but only 5 getting used. Possibly the same thing? I also might have one but I’ll need to check the breaker cars I have. On another note, I guess you are doing your Teves20 swap Tonedef? I don’t suppose you’ll be doing a wee how to write up? 🤞😁 I might do, although not until after it actually works! Quote Share this post Link to post Share on other sites
tonedef 9 Posted February 22, 2020 I have three various flat 5 pin connectors but not the 191906231D, over to easypops to see if he has one. Disappointingly I also can't find the 6 pin I'm looking for to connect up my Passat ABS lamp, it does only require 3 of the cores so I might end up hacking a 7 pin plug up to get the light wired in, I can always swap it out later! Quote Share this post Link to post Share on other sites
easypops 8 Posted February 22, 2020 Do you need any of the wiring mate? Wouldn’t be too much stress to follow it back a bit 👍 Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 22, 2020 That's the one. I intend on swapping out the pins, so dont need the loom. Although if it did have 6" of wiring attached I can just push these into my old pins to see if my crazy method will work. My plan is to swap out the late old abs light that is totally broken and sells for gold, for an earlier version. If it works I will post a 'how to' up on here, Let me know what I owe you for that Martin, Cheers Quote Share this post Link to post Share on other sites
easypops 8 Posted February 23, 2020 On 2/22/2020 at 7:06 PM, Cressa said: That's the one. I intend on swapping out the pins, so dont need the loom. Although if it did have 6" of wiring attached I can just push these into my old pins to see if my crazy method will work. My plan is to swap out the late old abs light that is totally broken and sells for gold, for an earlier version. If it works I will post a 'how to' up on here, Let me know what I owe you for that Martin, Cheers Fire me a message with your address details mate and I’ll get it in the post to you 👍😁 No cost mate😎 Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 23, 2020 PM sent mate, thank you. 🙃😊 Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 27, 2020 Received today Martin, thank you very much mate. Perfect Quote Share this post Link to post Share on other sites