Madjackal

I have just received my 200mm supercharged badge in red! Very Please with the quality, its indistinguishable from the original! Quick question tho? What does one use to adhere it to the car??

I need a passenger seat tilt handle do you happen to have one? ---------- Post added at 1:20 PM ---------- Previous post was at 1:18 PM ---------- with the bolts if possible!

My car is missing this and Im looking for one preferably with no damage to it. Cheers

Is it possible to order these yet, im very keen! 200mm red supercharged please? :)

1, will a flowed and ported TB make any difference to a supercharged vr? My previous experience on a naturally aspirated one was improved throttle response over speed or acceleration. im also running 263 cams and a schrick manifold. 2, long ago someone on here would take your old t/b off your hands and for a fee would provide you with a flowed/ported one. I forget who it was though? cheers

Will this fit, anyone? http://www.ebay.co.uk/itm/vw-golf-mk4-anniversary-handbrake-/121108799058?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AGolf%7CCars+Type%3A3.2+R32+4motion&hash=item1c32a59e52

excellent, i will definitely be ordering a 200mm Red Many thanks!

any news on this, availability etc?

Do you have the steering wheel surround and preferably the screw that hold it in as well. Also may be interested in the instrument and dials box if you have it? Cheers

Did one side yesterday after getting the grippers, was a pig to get to. Whoever designed that bracket that holds the brake line in place need shooting. its so wide I couldn't get my wrench onto the driver, nor could I get a spanner on the gripper and when i used a small extension bar the sus strut was in the way! Anyway a lot of fiddling and hammering and messing about and I finally did it. I already have the piston winder so no worries there, that was a pig to wind back!! Just got the other side to do now, which I'm off to do in a few mins, but I'm gonna douse it in wd40 first and hope the bolts aren't so bad on the offside. Its just the bearings that I hate doing, its such a laborious process! Speaking of which does anyone have a torque setting for the bolt that holds the bearing in? (that goes on the stub axle before the cover and split pin). The one I just took off was barley hand tight. This doesn't hold the wheel on I take it!?!?

rust seal! lol. I am very well aquainted with that! Cool ok. Will pick the grippers up tomorrow, and see if Wolsey have some bolts. I just cant help my affinity with big, load and firey tools! Cheers for the help dude!!

Ok cool thanks, what about heating it up with a blow torch will that more than likely knacker the sensor too?

Fluid?

ok i'll take a look thanks!

by the way i do have an angle grinder!? :)

I got to fitting my new rear brakes today only to be stumped by the allen key style bolt holding the caliper on to the rear hub/subframe. 1. Can someone confirm for me the correct size of driver I need as I thought I had the correct size but it was so rusty in there it was too hard to tell. (Don't ask me the size I have I'm not sure and forgot to check before calling it a day) 2. Does anyone have any good procedure for doing this as the brake hoses and suspension strut all really get in the way, making it hard to get a good purchase in the hex. 3. What do I do if I have (hypothetically speaking, ahem...) rounded the inside of the bolt? I will be heading over to the stealers tomorrow for new bolts, however whilst on the subject, who's idea was it to use these abominations, instead of nice normal right minded hex bolts, they are good enough for the fronts, so why not the rears. I've always struggled doing the rear brakes cos the bolts cant seem to stand up to the torque required to get them off, especially since the rears and subject to higher risk of rusting due to longer maintenance intervals! Bad choice VW, bad choice!

Hi there, do you still have any of the Red "supercharged" badges left for sale?

Driver's side wheel arch liner and front splitter??

Just checking. these are sold right?

..or someone has squashed your's! ;)

!!

http://lookslikegooddesign.com/quattro-concept-audi/

Thankyou!

faster?

Can anyone confirm whether or not the 2.8 Vr6 sump is different from the 2.9?? ---------- Post added at 10:24 AM ---------- Previous post was at 10:19 AM ---------- got a part number of 021103601B for the 2.8