Cressa

Good luck with that one mate. .. I had all my dash out and can't think of anything that could beep behind the dash. Do you have any lights left on buzzer/other aftermarket electronics fitted to your baby Sent from my SM-G900F using Tapatalk

It does look very nice, if only overpriced. ..imo Sent from my SM-G900F using Tapatalk

Someone who was local to me near Sheffield. Wasn't ridiculously expensive either. Just strip yours down and find someone local as they are bloomin heavy to post Sent from my SM-G900F using Tapatalk

The wish bones are new with an extra coat of paint tho Sent from my SM-G900F using Tapatalk

[ATTACH]83685[/ATTACH]mine was sand blasted I think. ...then powder coated. Happy with it[emoji3] Sent from my SM-G900F using Tapatalk

Mine was broken. I managed to purchase a 2nd hand unit and rob the cog for mine. I did find that a 95 polo had the exact same flaps which have a better covering and also a straight swap. That's what I used in mine. I'll look this weekend to see if I Have a spare but can't promise I would Sent from my SM-G900F using Tapatalk

[ATTACH]83684[/ATTACH]which one do you think is missing? Sent from my SM-G900F using Tapatalk

How did the viewing go?

Apologies, I was writing and saw that post. I know my box came out on its own,but getting it all out sounds good. It gets to Have a full clean

Definitely 2 nuts in the engine bay. Bottom one is a spinning swine but will come out as you undo and someone else pulls. I think it has screw fixings at the bottom. Unfortunately mine has aircon and doesn't fix up to the motor part boxing on the left, so I don't know if a normal one does

Can I duplicate that wish list. Must do the lottery. . Sent from my SM-G900F using Tapatalk

I bought some clips from TPS the other month. Not expensive either Sent from my SM-G900F using Tapatalk

The other black cable goes down and curls back on itself up to a separate flap. I've even tried looking on Google images but can't find you a decent picture. I know its a pain but the best thing I ever did was get the dash out and sort these gremlins out properly and to refurb the flaps in the box. I do think your controls have jumped some cogs as they should both go to the right hand side. You should be able to lift/separate them apart. Somehow they will go back I found the corrado club of Canada comments to be helpful on this. Google brought them up Sent from my SM-G900F using Tapatalk

That shine looks fantastic Sent from my SM-G900F using Tapatalk

I'm trying to look and understand some pictures I have...only 2 go to the bottom. A black and a blue one. The other just controls a flap higher up. If you hold the cable outer sleeving and pull on the inner wire, do things move freely?? Connect the power wire back into your controls so you can get air blowing, then you can pull on the cable wires to understand what they do. .hopefully Sent from my SM-G900F using Tapatalk

I've just re looked at my picture. . Wondering if it may have jumped a few cogs and knocked it out of synch. They should definitely both go to the right Sent from my SM-G900F using Tapatalk

Are you turning the directional control with the bowden connected. ... If so disconnect, check the control now turns and then reach underneath and see if you can manually move the cogs via the cable arms underneath. Somethings dodgy, but there are some good 'what to check' ideas on here. They're what I used to understand my problem Sent from my SM-G900F using Tapatalk

Thanks Jim. Just trying to give back all the help I've received from fellow members Sent from my SM-G900F using Tapatalk

I never thought about re trimming what I have? As mine is fine! ! Hmmmm. Or does it cost more than recaros? Sent from my SM-G900F using Tapatalk

[ATTACH]83681[/ATTACH][ATTACH]83682[/ATTACH] Sent from my SM-G900F using Tapatalk

Be gentle with the directional controls. You need to remove fascia unit and check a clip hasn't come out its location. I also vacuumed and silicone spray lubed mine for a smooth operation. There's some info on here about the clip that causes a problem but I Have refitted mine. Also check that on the heater box the cogs are correctly lined up. Sounds impossible upside I know but they have small indents on them to ensure all is lined up correctly. Go patiently as replacement heater controls are daft money. Good luck. I do have some photos somewhere Sent from my SM-G900F using Tapatalk

They look gorgeous. Too nice to sit in Sent from my SM-G900F using Tapatalk

[ATTACH]83680[/ATTACH] De-rusted, treated and painted the headlight mounting fixing clips. Hopefully I've got then the right way round[emoji31] Sent from my SM-G900F using Tapatalk

Aghhh the pain is killing me. I'm going to switch my wifi off so I don't succumb to late temptation. Tomorrow is a fresh day for this decision Sent from my SM-G900F using Tapatalk

Dont! !! I need someone else to buy it so I don't. . But I have looked and its a hell journey Sent from my SM-G900F using Tapatalk