StormchargedVR6
Members-
Content Count
1,562 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by StormchargedVR6
-
My oil temps been fine,102 is the highest in traffic. Keep 50 & 90mm spare mate :grin: Cheers Dave, i luv this shot. Took two mates, one hanging out of a Golf :lol: What speed limit, got no time to look at my speed :norty: What you up to with my pics :scratch: :grin:
-
Just had to put this moving shot up, a mate took it early sunday morning . Looks better with 90mm splitter 8) corrado-1 (Large).jpg[/attachment:3ptw7yt8]
-
Looking good james, you forgot the sill mate :lol:
-
Dave is rite, you don't need the braided stuff. Speedflow are the best around for all fuel fitting. I've spent a fortune with them, but you get what you pay for :) VRT 046.JPG[/attachment:34m2e5f7]
-
Black VR6 - Rotrex - Mapping Update on Pg 20
StormchargedVR6 replied to B5VWC's topic in Members Gallery
I was looking at this setup it uses 330mm APRacing calipers MJMAUTOHAUS $ Rate is good shipped to UK comes to £930 but add vat/customs, still AP are best, also will they fit behind your rims Thanks for the link mate, will be doing brakes next for sure -
Gilboyto's OBD2 Converted VR6 Turbo Corrado
StormchargedVR6 replied to Gilboyto's topic in Members Gallery
Welcome, nice to see more VRTs on here :) Nice setup mate -
Nugget G60 - Updated 23rd July - new pics
StormchargedVR6 replied to Andy665's topic in Members Gallery
Still like the Dodo juice stuff, got two tubs of it :D Where did you buy the zaino stuff from -
Nugget G60 - Updated 23rd July - new pics
StormchargedVR6 replied to Andy665's topic in Members Gallery
Nice work Andy, looks stunning as ever :D Mite have to try this Zaino stuff myself :) -
Black VR6 - Rotrex - Mapping Update on Pg 20
StormchargedVR6 replied to B5VWC's topic in Members Gallery
Not yet mate its at the garage getting the second lambda welded in for the wideband prob fit end of week Hows yours going cant wait to see it pop over coventry sometime should only take you half n hour to get here :D That Exhaust will free up bit more BHP Going very well mate, once you got this sort of power it starts to get mental :grin: Needs some bigger brakes, everything comes up so quick :shocked!: -
Black VR6 - Rotrex - Mapping Update on Pg 20
StormchargedVR6 replied to B5VWC's topic in Members Gallery
Looking good mate, you got the Exhaust on :) -
V-band rite though mate , Tial Bov & gate gives off nice sound :D
-
Its a GT3076R / .82 A/R with T3 3'' Exhaust side
-
I know :clap: its hard keeping everybody happy :lol:
-
When i get it on ramp will post some pics. Kev's selling his C2 software :D Its crap mate, don't bother.
-
Nugget G60 - Updated 23rd July - new pics
StormchargedVR6 replied to Andy665's topic in Members Gallery
Looking Awesome as ever Andy, think have to repaint mine before next show :lol: -
Cheers Andy, looking forward to meeting up again at some shows :) Im happy with 400bhp , just need to get all the power to the ground now , so im looking into gearboxs , diffs :grin: Emerald mate, £580. With your skills mate you will map it. Give you my map with my laptop if you want :D
-
Mate can't praise JKM enough, the exhaust is awesome, no banging ,booming,catching. its 3'' rite though with jetex rear box and so quite. Will try and get over before end of year, need to save for my gearbox now :lol: Thn more boost :cuckoo:
-
Cheers dave , im so happy with it :D ,the power is awesome. Time for you to turn the boost up dave :lol:
-
That its dam quick :shock: Most Turbo car i've been in you feel lag then the turbo inn then nothing, this is nothing like that Its pulls and pulls faster & faster from low down then boost just keeps going, think because im losing traction so easy its hard to say
-
James , i put the dyno plots up. Its running @ 1 bar. You can feel it spool up so quick theres no lag :D
-
Few pics for you kev :D stromlaufplan_gamma4.pdfVRT 045.JPG[/attachment:3knoz8n2] Corrado92.pdfVRT 046.JPG[/attachment:3knoz8n2] passat climatronic wiring diags.pdfVRT 050.JPG[/attachment:3knoz8n2] climatronic wiring-Golf from May 01.pdfVRT 051.JPG[/attachment:3knoz8n2] 2.8l 24v Climatronic system.pdfVRT 024.JPG[/attachment:3knoz8n2] VRT 028.JPG[/attachment:3knoz8n2]
-
No one dare get that close to it mate :lol: The back box is ok, can't do much about it. Its only a single box system and its got a awesome sound 8) Im not the first mate ,bobby with the Rotrex made 402bhp. Think kev will up his boost soon :grin:
-
Be cleaning today, some better shots. Took it out for a spin without all the weight in the back from the box of spares, even took spare wheel & jack out My god its Quick, im well made up :clap: :clap: :clap: :clap: :clap: :clap: :clap: :lol: ETKA Corrado.pdfVRT 040 (Large).JPG[/attachment:fwifjxl9] stromlaufplan_gamma4.pdfVRT 041 (Large).JPG[/attachment:fwifjxl9] Corrado92.pdfVRT 050 (Large).JPG[/attachment:fwifjxl9] passat climatronic wiring diags.pdfVRT 032 (Large).JPG[/attachment:fwifjxl9] climatronic wiring-Golf from May 01.pdfVRT 057 (Large).JPG[/attachment:fwifjxl9] 2.8l 24v Climatronic system.pdfVRT 027 (Large).JPG[/attachment:fwifjxl9] VRT 047.JPG[/attachment:fwifjxl9]
-
Nice one Shaun, top work, kick ass torque!!! Putting 400 horses down is mad but my peloquin diff helps and wait till you hit the brakes Yeah Torque is mad mate, just pulls so low down rite to the red line, must saying braking bit of a problem :shocked!: Get some more pics up later, JKM done a Awesome job. Getting them to build me a box over the winter, then up the Boost :cuckoo:
-
400BHP is enough for now , im still in :shock: My first test drive round the block at JKM was in the wet that was fun Spinning in third :D This will keep a smile on my face for a good while, why did i ever go S/Charged its so slow :lol: I have never been in a Turbo car with no lag, VR takes turbo so well should be standard :D I am uping the boost later :cuckoo: Really need a diff, thats next.