ww-promo
Members-
Content Count
120 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by ww-promo
-
VR steering from the rear!! Abandoned on side of road.
ww-promo replied to ww-promo's topic in Drivetrain
F :censored: K it! Sure this ones cursed! I dont really know what Im doing so will have to get my garage to come and collect her. Wheres that bus stop again? :( -
Hi, I have recently had some knocking comming from the rear end [passenger side] when reversing out of the drive or turning into say a car park over a small pavement step etc. Untill tonight, I had just pulled out onto a dual carriageway and I heard a bit of a clunk, then the C seemed to wobbly left to right! :shock: It seemed like the rear end was steering. After :censored: :censored: :censored: alot I very quickly & slowly pulled over and abandoned her :( . Can anyone please help me. Would it be the rear axel bushes? I did notice that the rear wheel had rubbed on the inside, so somthing has moved, alot! Thanks in advance! Oli
-
:help: Mmm......Anyone got 3? :D
-
Hey, I did mention it, but I think it was a little too far!! :(
-
Spotted a blue C on the Sainsburys roundabout in Chester this morning at about 8:45am. Got a nod! :D
-
Cheers! I really like it. Would love a set of wide rims for my VR, But this wedding lark.........?! Here is another, did this one in Coral as at work, not too familier with Coral. PS much better!
-
I see your point! I cropped the Jetta pic as the cards on the tables will have the full photo on them. Dont think I have another shot of it. Will see what it looks like with the whole car on show. I do like the G40s! Mmm. Cheers!
-
Alright, Hows this? Oli
-
Yes, I suppose I do!!.......and she loves it! :-)
-
Hey, Im getting married in a few weeks and am naming the tables after my fav Dubs [The Corrado being top table]. I have just finished the table plan and wanted to show it off and get your thoughts/comments please! Enjoy, Oli.
-
Alright, Ive used 'White Wizard' before on my headlining and it works a treat! In fact it cleans pretty much any & everything it touches. Link below: http://www.lakeland.co.uk/white-wizard/F/C/cleaning-protecting/C/cleaning-protecting-clean-home/product/8988
-
Rogue sparks flying around my lead/spark plug interface
ww-promo replied to ww-promo's topic in Engine Bay
Cheers for the info pete_griff & WreckedGecko! -
Rogue sparks flying around my lead/spark plug interface
ww-promo replied to ww-promo's topic in Engine Bay
Yea your right; I mean rogue - as in unwanted! :shock: Cheers. Will have a look at the lead. Need to get hold of a spark plug tool first. Thanks -
Just wondering if anyone on here can help. I’ve been away for a week and on my return started up my VR to warm her up. Whilst sat on my drive I then noticed a clicking/sparking noise coming from under the bonnet so had a closer look. I then noticed a few rogue sparks flying around my lead/spark plug interface. Does this mean my plugs are knackered or is it something else more serious? Their only 13/14 months old. Ive had a good search but not quite found anything. Cheers.
-
:lol: :lol: :lol:
-
....RED paint is clearly the fastest!............as its the lightest!! 8)
-
Cheers guys! Carn't stop looking at her. I left it far too long to give her a clean. As for the paint, a previous owner had her resprayed, and I've had the bumpers & drivers front wing re-done [on the insurance]. :D
-
Right not posted on here for a while now. I had the insurance work done before Christmas and all sweet.
-
The suspension is second hand so would have thought its already bedded in....Pic below. Excuse the dirt :roll:
-
Hi, The rear height sits nice, and is lower than the front. But I can get 4 fingers :wink: in between the front tyre and arch. I know you can adjust the rear height a bit, but the setting was not on its lowest, so in theory the rear could go lower [or higher] if needed. If i increase the height of the rears then I'll be back to a standard ride height which defeats the point really..... :scratch:
-
Hi. I have done a few searches on here and google but not found any answers as yet, can anybody help? Please. I have just had a set of Koni-Eibach top adjustable fitted to my L reg VR6 and the front seems to sit at the same height as the standard set. It is also a lot higher than the rear. This does not seem right, I had the same set up on my old 1.8 valver and that sat a lot lower. Is there something that the garage may have not done when fitting them to cause this? I have spoken to them since but they don’t know what it could be. Has anyone experienced this? And/or know how to correct it. Thanks ps. I will post a pic tonight.
-
Found my [now sold :( ] Valver! She does look good!....
-
Just reading your thread as I have the same problem with my VR. Have you managed to sort it? I have my MOT next week so will ask my garage what they think. Ta.
-
Blue C in Whitby E.Port driving towards chester about 6pm. Exchanged flashes :D
-