VR6Pete

Hiya? Could do with these as soon as possible. Think I've had most of the others off you already lol :)

Thanks for that info. I think I'll start there as its suspect :) does the slide clip just slide upwards? And out it pops? I'm hoping maybe I can clean it up or something... Is is possible to remove this without having to drop the tank?

Some good info there, will have get vag com out check valve... Checked around the filler neck and I see the below... Right side.... Left side... Now. There was a massive build up on mud and all sorts around that area... Where exactly am I looking for the breather can't see anything like a ball shape?

I'm after a front sub frame for a corrado VR6. If by any chance it's powder coated already then great if not no worries as I'd get it done before fitting :) Ideally would like it posted. Or if its local to Stoke on Trent id collect :) Cheers Pete

I thought I was finished but it failed the MOT on a few things and noticed oil temps getting to 104... Only drove it 10 mins down the road! Water temp was fine so I'm going replace the oil cooler :)

Is that the valve that is mounted to the strut behind where the air intake is ? Any way of testing that valve works? I unplugged the cable and ran vagcom and it threw an error, plugged it back in and it went away? :)

Where is the actual tank vent mate?

I've got another massive list of things to do !! :(

Hi buddy. I'm pretty sure it has been tampered with as the affected side looks totally different from the other side? I think for the hassle trying repair I'll just replace with a powder coated job...

Front bolt :(

Apologies for the naff pics :) I'm actually after 2 of the rubbers shown in this picture that holds up the mid section suitcase... Mine looked to have stretched... Are they easy get hold of from dealers or can I get them from other cheaper places? Cheers Pete

thanks, found them now :) will start contructing a parts list to replace front subframe!

Is the tank vent the same as the valve thing? Or something else? :) ---------- Post added at 10:07 PM ---------- Previous post was at 9:39 PM ---------- found this photo on the webs - is it anything I need to check thats shown in this pic? http://www.use.com/showorig.pl?set=e47bea2b895a3ca1d513&p=3

Took both my cars for an MOT. both failed! Punto 2007 plate Emissions Exhaust practically snapped in half on the flexi! Corrado (most importantly) Emissions - Passed! Brakes - Passed 2x front to rear hard lines - Failed (corrosion) 1x Front passenger side ABS to Flexi - Failed (corrosion) ARB Drop Links - Failed Advisories: Headlamp alignment, noticed that the glass fitted to my drivers side was from a left hooker, so was sending the beam pattern the wrong way, will replace the glass from my spares. Brake discs pitted - not surprising, its been standing for over 3 years :) Front Subframe bolt that holds the passenger side wishbone was just spinning, wouldnt tigthen up, closer inspection looks like someone has attempted to repair the captive nut but has made a right bodge of it! as it looks like a sealed unit, it will be just be easier and probably safer to replace the sub-frame so now on the hunt for one I can get powder coated etc... Everything else was spot on... no reason why it shouldnt pass if i just did the drop links, and brake lines, but i really dont want to until ive sorted the sub-frame, and swapped the head light lense over too... Well, its a bit of a bummer but it was worth the £25 MOT cost to know what is wrong and what i need to fix before I can get it on the road!! The punto on the other hand... im gonna drive off a cliff !

Have you got a link for those matey? :) from VW spares?

Thanks i will take a look at that... to see if it is functional.

Are they genuine only then thes? :)

Ok, so my front sub-frame is fecked! The bolt that secures the wish bone on the passenger side keeps spinning and resulting in clunking noises and play.... Im told a captive nut has probably snapped, therefore isnt secured properly... looks like some has previously tried to cut it open as it's all mashed and can see visible signes of welding! Soooooooooo. I think I need a new front sub frame is anyone has one? My question is what Bolts etc... would I need to replace to do the job...? With any part numbers... will probably get new lower arms too while im at it... can anyone recommend how i can go about doing this ? :) really frustrated that another persons bodge has left me with what I consider an unsafe sub-frame! cheers Pete

It failed on the drop links too. not noticed that the boot has perished! So, my question is, where can I get new drop links from? Cheers :) Pete

Well, my MOT was a bit of a flop today! Few issues (expect other threads to appear :) ) but one issue is that it stank of fuel... from the tank area... no leaks, has been bone dry, but after having it running a large build up of pressure is seen in the tank, and when i un-screwed the petrol cap, there was a massive hiss and it stunk of fuel! so seems to be a build up of pressure... some advise needed as to what could cause this, and what can I do to resolve the issue...are there any common issues / breather pipes etc to look at? Cheers Pete

Hi mate, I need the 2 front to rear lines, and also the passenger side line from abs unit to front passenger flexi line, mine are badly rusted up, couldnt see them until it was on a ramp today.... can you please let me know a price ?

Ok, so I will properly update the thread later with the recent work done, but sorted a couple of leaks, replaced aux pump, fitted stainless straps etc.... today is D-Day! it's booked in for an MOT at 2pm! so please wish us luck :)

Ok, heres the names from VR6OC.... not many people want to commit fully until a price is known which I totally understand, likewise on getting definate names down to approach Bill... nothing more frustrating that people saying they are in and then when the price is known they duck out.... makes you look a pleb :) VR6OC - Pearsy47 Depending on price VR6OC - michael5556 Depending on price VR6OC - Daverse Depending on price VR6OC - russj249 Depending on price VR6OC - J4Y VR - Depending on price VR6OC - lumoxs - Depending on price ---------- Post added at 9:57 AM ---------- Previous post was at 9:55 AM ---------- Would it also be worth seeing if Vince fanices offering a special "mapping" price as part of this too?

Please put my name down for 263's :) cheers. Will add vr6 oc names later..

I will add the vr6oc names later :)