VR6Pete

Couldn't get one anywhere! Ended up a dealer job, think i ended up paying a few quid... Should have just gone dealers with all the time I wasted tracking one down and with the wasted fuel running to local motor factor shops! Not even gsf or ECP had any...

those 16" speedlines look the dogs!

interested... but want to wait until someone has trail fitted before I buy a set... I have an OBD2 corrado.... what figures we talking with 15% discount? dont need clamp kit, i bought all new ones when I rebuilt my engine.

Arse :-) wonder where that has gone ! Best have a good look around my garage tomorrow

Niceone mate. Got the bulb ok! I think I've lost part of my holder!! Should it have a cover over the front of the bulb? See pic :)

Hi thanks for that detailed description - I have the rest - its just literally the black plastic holder (with bulb) I have the white casing etc...

could you drop me a PM with your paypal details mate?

This is my last bulb to replace in the car! whooo

To be fair, I'd need abulb holder too... I've lost mine :)

Can you take pics? Its the entire bit that the terminal plugs into ? black plastic thingy that the bulb is part of? I thought it was a clear bulb? :)

I did some searching on here for an alternative one, but when it came looked totally different!!

I couldnt see how it was possible to solder a new bulb in as the bulb seemed resessed into the plastic holder device thing? :)

As I cant seem to be able to get hold of an ashtray bulb from the dealers anymore, can anyone offer a working one?

cheers

Pete

Here's a few photos I took of the engine bay today!

Also managed to locate and route the wire to my glove compartment lamp as it was lost in action with the dash being out etc... Also fitted my glovebox strip too...

I am after some interior screws that's commonly used in and around the dash area if anyone has any spare, typically I've lost a few during the rebuild... :)

I found that my trim had been bonded in! Nightmare get it off, got new trim and clips job done properly now!

Picked mine up off eBay :) from GPC VW http://www.gpcvwaudi.com/

Big screw driver, firm tap with a hammer, came straight off

I spotted this too yesterday, did seem to be working ok, as sure I would have clocked it before.

Think that's fairly common - same on my forum over at VR6OC, you won't seee your own thread but others do :)

Don't have one on mine either, nor did my mk3 vr6...

I had some made up for me:

[ATTACH=CONFIG]52785[/ATTACH]

The other brackets were available on here for purchase (I think)... polished ones - dave16v

other options is to shot blast and powder coat...

SP 263's for 50 quid? You'll be lucky hehe

is the inner pannel around the filler neck ok ? if so, are you willing take a grinder to it and cut it out for me? :)

Been spraying up my corrado badge this weekend! Not looking too bad, used genuine VW L041 Paint and lacquer... Not bad from a can!

40 quid ok for TB with ISV inlet manifold too, also got a lower inlet for a tenner if you want it too....

Still on my original! Had replace front section other month though but rest is still ok! :)

Got both. But collection only from stoke

I had all my engine bits vapour blasted! Looks mint!

I then polished the face of the inlet manifold!

Bet you can't guess which photo was of my engine before I tarted it all up :)

Cheers matey :) it gives me a starting point with this... Not sure if it's an easy job to re-program? Maybe I'll have a read on the net!