iow_corrado_g60

http://www.bar-tek-tuning.de/cgi-bin/co ... 12771-1839

you should be able to get a tidy one on here have a look on the knowledge base on the main page mate it will take you to wiki and then look at vr6 buying guide good luck! Andy

As title just interested if anyone is running these smaller pulleys on there G? and how much more bhp would you expect from 65mm toothed pulley kit? and also has anyone got a bar tek tuning chip? Cheers in advance Andy

is that coz it will sit out too far kev?

im up for that theres someone on the forum ill send him a pm if we get 10 plus ppl saying there interested mike_g60 has one already looks good imo!

heres roughly what i the stats should be but obviously 0-60 is wrong as of gear box Power at Flywheel (BHP) : 220 Weight without Driver (KG) : 1215 Power to Weight Ratio (BHP Per Ton) : 183.98 0 - 60 (Secs) : 6.04 0 - 100 (Secs) : 14.97 60 - 100 (Secs) : 8.93 Quarter Mile (Secs) : 14.42 Terminal Speed (MPH) : 98.15 Drag Strip Quarter Mile (Secs) : 14.22 Drag Strip Terminal Speed (MPH) : 99.89

is this it? http://www.demon-tweeks.co.uk/products/ ... e=MSD63730 http://www.demon-tweeks.co.uk/products/ ... PEG1290-20 if so are these good/bad for the engine?

hi all need a metal header tank for the C! to finish my bay off! a few questions can anyone help please does anyone know if they do a corrado specific 1? if not, does anyone know how big they are or how much water they hold so i can get one spec'd up? then theres another thing when i went and picked afew bits up from billinjah not too long ago! i saw he had got rid of his and was like a sleeve with a pressure cap in piping that goes into the right side of the rad does anyone know how this is done and how easy/good this is? Cheers in advance Andy

yeah ill let you know aide when were doing it wont be for a while as i wanna let my charger do a few more miles she only on 240!

nice one chap looks quiality

bannana in the exhaust! this is gonna turn into an out an out drag soon lol! all i want is to go 4 a little drive so i dont get embarrased what if i put his spacer saver wheel on so he cant do over 55 :lol:

i didnt know that whole different ball game now mate but hey will be a laugh! just if anyones interested here's the power graph http://www.superchips.co.uk/curves/r32.pdf

ah nice one sam what size was the pad think i need one under 4" across

i spoke to my best mate about this he sprayed and refurbed my alloys and i was asking him about the polishing and then laquering can you let me know how that goes mate? cheers andy ill give you an update on the polishing when the polishingshop.co.uk gets back to me!

coxy ur a 100% rite mate im sure we'll have some fun :lol: ben so u reckon my quater mile will be about 15.5ish

will we'll have to race to turnmills on sat 10 pints die in hotel drive home non racing lol

has any g60 owners got there 1/4 mile times?

just looked and the 0-100 on a tegra if rite is 16ish secs so mine must be around that? and the tegra's power/to wright is 173bhp per tonne! r32 is is 159bhp/ton as http://www.evo.co.uk/cargrouptests/carg ... rious.html http://www.import-heaven.net/specs_volk ... _r32.shtml getting some funny reports on the 0-60 ranges 5.8 - 6.4 and 1/4 mile is 14.4

will - we have a pint on it mate but thats all. he knows roughly how quick my car is as he was out in in loads before i got all new bits! im well looking forward to it! im not gonna race anyone in the wet let alone his 4wd so it should be more even wen we venture out in the dry! im gonna try find a power of an r32 and compare it i think the 1/4 mile for r32 is 14.9 can anyone confirm this! i had beaten a tegra typr-r before i got stuff done so im holding out a bit of luck! defo videoing thou for future reference and my new you tube adiction lol! walesy - has the caddy a g60 lump in it? its funny as R32 is probs my second fav car after the C

just want to keep it shiny mate now all polishing done! what sort of drill would you recommend as my one at home is from b&q and only cost £35 bar. do you think that will sufice just to keep shiny!

dont think so fella i need to order some new leads on friday when get paid! so its possible! but not sure mate! cheers for you concern chap see you soon!

Hi all need a small orbital polisher or some soft mop dril bits to keep my engine bay clean! can anyone tell me if they do a small grinder style orbital polisher and if they sell the polishing mops that can fit on drills coz ive seen the kits with the mops etc on frosts and thepolishing shop but would like to know how do you attach these to your drill if anyone can help that would be great Thanks in advance Andy

yes aide i am jus happy its a quite simple fix! and not something that means me taking bits off her again!

mave thats probs not too far off mate as there 0-60 is 6.4 for r32 and stock vr is 6.7 wonder what the bhp per ton is for each! anyone? ill try steer clear of standing starts with him hopefully and just a good solid thrash will get my mate in passenger seat to video as much as poss! sam you'd obilterate one wouldnt you! what have you raced since you got the engine back anything interesting?

matt im gonna video it mate loving the you tube at the mo! 215 last rr day! ive added a few little extra's since then!